Wreath hanger for timber clad door

Two Command Strips, available from most shops. Then before applying them clean the area of the door using windowlene and let it dry. Then apply both Command Strips at exactly the same height and press them well onto the door. Then hang the wreath across both.

Option #2 would be to pin a loop of string from the very top edge of the door so that the pin is behind and under the seal, then hang the string down from that. For example, putting a pin or screw where the red vertical mark is in this image.

What's the inside of the door like, could you conceal a sticky back hook on the inside and use thin fishing line to hang the wreath.