Replace mouldy backs on wardrobes

BarraOG · 12-09-2024 02:00PM #1

We have pax wardrobes by Ikea which have hardboard on the back. We had a problem with mould before which is mostly solved now, but the backs have mould imbedded in them. I was thinking of buying new board but was wondering if there is a better material.

We solved the mould issue with better insulation and a dehumidifier. However, we have had the wardrobes out a foot or so from the wall since the problem started. There was some staining on the wall which I removed with white vinegar and have since repainted. I'm a bit nervous that when we place the wardrobes against the wall again that the mould issue will reappear. Any tips?

tabby aspreme · 12-09-2024 02:11PM

Keep the wardrobes 30 mm out from the wall to allow air to circulate around the back of the wardrobe, this should help prevent mould returning

FrancieBrady · 12-09-2024 02:16PM

May or may not come back. More likely it won't with the actions you have taken. All you can do is put them on the spring-clean list and move them out to clean if needed.

rob316 · 12-09-2024 02:38PM

https://www.boards.ie/discussion/2058368718/replace-mouldy-backs-on-wardrobes

The backs just square out the frames, its just made out of mdf, usually about 3mm.

Mr321 · 12-09-2024 03:39PM

https://www.boards.ie/discussion/comment/122608875#Comment_122608875

Yea they are usually panel pinned or stapled in. Varnish them with a brush at the wall side after you put in the replacement and keep out from wall as already said a min of 30mm

FrancieBrady · 12-09-2024 03:47PM

https://www.boards.ie/discussion/comment/122609092#Comment_122609092

You can get mould inhibiting paint

Mould Inhibiting Matt Paint | Clean Extreme Scrubbable Paints (crowndecoratingcentres.ie)

or an additive

Mouldx 1 Litre Anti-Mould Additive | Woodie's (woodies.ie)

Replace mouldy backs on wardrobes

Comments