Replace mouldy backs on wardrobes

BarraOG

We have pax wardrobes by Ikea which have hardboard on the back. We had a problem with mould before which is mostly solved now, but the backs have mould imbedded in them. I was thinking of buying new board but was wondering if there is a better material.

We solved the mould issue with better insulation and a dehumidifier. However, we have had the wardrobes out a foot or so from the wall since the problem started. There was some staining on the wall which I removed with white vinegar and have since repainted. I'm a bit nervous that when we place the wardrobes against the wall again that the mould issue will reappear. Any tips?

tabby aspreme

Keep the wardrobes 30 mm out from the wall to allow air to circulate around the back of the wardrobe, this should help prevent mould returning

FrancieBrady

May or may not come back. More likely it won't with the actions you have taken. All you can do is put them on the spring-clean list and move them out to clean if needed.

rob316

https://www.boards.ie/discussion/2058368718/replace-mouldy-backs-on-wardrobes

The backs just square out the frames, its just made out of mdf, usually about 3mm.

Mr321

https://www.boards.ie/discussion/comment/122608875#Comment_122608875

Yea they are usually panel pinned or stapled in. Varnish them with a brush at the wall side after you put in the replacement and keep out from wall as already said a min of 30mm

FrancieBrady

https://www.boards.ie/discussion/comment/122609092#Comment_122609092

You can get mould inhibiting paint

Mould Inhibiting Matt Paint | Clean Extreme Scrubbable Paints (crowndecoratingcentres.ie)

or an additive

Mouldx 1 Litre Anti-Mould Additive | Woodie's (woodies.ie)