Starter Solenoid Help Needed

newmember2 · 2024-04-21 13:25:22

I traced a starting problem to a snapped off spade connector on the starter solenoid. There's absolutely no strain on the cable or connector - would just vibrations have done this? Please can someone advise how to reconnect cable or spade connector in the photo to what's left of the solenoid connector? (I'm after snapping…

21-04-2024 02:25PM

#1

newmember2

Registered Users, Registered Users 2 Posts: 2,586 ✭✭✭

Join Date: November 2009

Posts: 2495

I traced a starting problem to a snapped off spade connector on the starter solenoid. There's absolutely no strain on the cable or connector - would just vibrations have done this? Please can someone advise how to reconnect cable or spade connector in the photo to what's left of the solenoid connector? (I'm after snapping off all the plastic around the connector for access). The other thing is that I can't remove the part from the car as I've no access to a jack or stands.
https://imgur.com/a/I4ZX2le

0

Comments

#2 22-04-2024 11:04AM

koldun

Registered Users, Registered Users 2 Posts: 8 ✭

Join Date: April 2024

Posts: 8

If you can get a soldering iron in there you could solder the wire to what's left of the spade connector. That would be the cheapest way. The correct way would be to change the starter motor.

0