Today I did something to my bike thread...

Squidgy Black · 24-09-2023 06:36PM

Took a small tumble off the bike a few weeks ago, at stationary speeds when I forgot to unclip/tried to track stand, and did a quick once over the bike and figured ah everything’s grand.

Creak developed, figured ah it’s probably the pressfit bb, eventually got around to taking a proper look at it after isolating it to the saddle area, popped out the seatpost and low and behold found the issue.

Frame seems fine, no cracks visible in the carbon etc around the seatpost wedge, so am assuming it’s just a possibility of overtorquing combined with a bit of a shunt. Just happy it didn’t end in catastrophic failure and a sharp end of a snapped seatpost up the hole

cletus · 29-09-2023 05:11PM

Considering my youngest fella referred to ma as a middle-aged man today, this seems like an appropriate addition to the bike

gn3dr · 11-10-2023 07:34PM

https://www.boards.ie/discussion/comment/121123892#Comment_121123892

So I weighed this last week - 15.7kg for the frame without the forks in! Bit hefty alright but it was his first cargo build so a bit exploratory. It's painted now and almost all together. Will post a picture when it is complete.

magicbastarder · 11-10-2023 09:25PM

A quick Google suggests that's not that heavy? e.g.

https://hagenbikes.com/products/nighthawk-cargo-bike-frameset

Squidgy Black · 11-10-2023 09:50PM

Yeah I would’ve thought that’d be fairly light for a cargo bike, a bakfiets is about 40kg, and a babboe is like 60

what_traffic · 11-10-2023 11:01PM

https://www.boards.ie/discussion/comment/121225240#Comment_121225240

That is on the light side. Please do post a pic

I'd say the finished product will be similar in weight to this https://argobikes.com/

if your friend is looking for an off the shelf box or a rain canopy the following might be useful

https://argobikes.com/products/argo-dashbox

gn3dr · 12-10-2023 04:55PM

Will post a picture when finished. He ran out of time before heading back to Thailand where he lives for 6 mths of the year so I will be finishing it over the next while. Remember that 15.7 kg was for the bare frame only, there's a lot of weight to be added with battery, motor etc.

gn3dr · 21-10-2023 01:50PM

IMG_20231021_132223.jpg

IMG_20231021_132230.jpg

My friend's cargo bike is almost finished. Just some wiring to tidy up, sort out the stand and maybe mudguards. Couldn't resist taking it up the road today for a spin. Bit weird on the steering with the small wheel and long wheelbase so I adjusted the ratio on that to slow down the steering. First time I rode an electric bike though. It can fairly shift. 🤪.

JMcL · 23-10-2023 08:16AM

That looks great. What weight did you end up with after battery, motor and all the gubbins got added?

what_traffic · 23-10-2023 12:58PM

https://www.boards.ie/discussion/comment/121266951#Comment_121266951

That bike looks fantastic. I tip my hat to them. A lot of hard work put into that!

gn3dr · 23-10-2023 07:14PM

https://www.boards.ie/discussion/comment/121273029#Comment_121273029

Not sure yet. Need to see if my bathroom scales goes up that high with me lifting it. I guess I could stand it up on the scales on the back wheel....

CantGetNoSleep · 28-10-2023 05:45PM

Getting ready for winter : mudguards on and tweaked (in spite of near disaster with partly stripped threads on the front fork bolt hole), seatpost greased, chain waxed (still undecided on this for the winter bike), new rear tire, front tire sealant topped up.

Will be my main bike for the next 5 to 6 months

gn3dr · 07-12-2023 11:46PM

Before

After

Sensah Phi shifters from AliExpress France for €88. Wanted to get rid of gear cables out the side of the 10 speed Ultegra shifters but couldn't justify removing the perfectly functioning Dura Ace 7700 stuff.

CramCycle · 13-12-2023 09:50AM

https://www.boards.ie/discussion/comment/121294728#Comment_121294728

Probably a trick of the camera angle but those handlebars look really wide for the size of the bike.

CantGetNoSleep · 13-12-2023 11:58AM

https://www.boards.ie/discussion/comment/121489683#Comment_121489683

Photo was taken in a very narrow corridor and the bike is not parallel to the wall. They are 40cm, although I'm thinking of going down to 38cm

sbs2010 · 13-12-2023 12:36PM

Took the bike out for first spin in 3months after a bit of a rebuild.

Sealed square taper bb gave up at end of August so I moved to ultra torque. There was a lot of faff getting that installed. Then I reckoned I needed a new chain, so then needed new cassette.

I took the opportunity to clean everything and put on new cables.

Then I couldn't get the brakes working right - they kept sticking, so got a new set of calipers.

And to finish it off, new bar tape :)

CramCycle · 13-12-2023 01:06PM

https://www.boards.ie/discussion/comment/121490146#Comment_121490146

Ah, they look way wider for some reason, I am on 38(outside to outside) and love them but each to their own, everyone comments they look skinny at races.

gn3dr · 13-12-2023 06:21PM

https://www.boards.ie/discussion/comment/121489683#Comment_121489683

Nah they're just 42's and the bike is 55cm top tube

Edit - ignore, I thought you were replying to my post

CramCycle · 14-12-2023 08:20AM

https://www.boards.ie/discussion/comment/121491792#Comment_121491792

These handlebars are really close, those handlebars are humongous.

devonp · 08-02-2024 11:27AM

started off with some small adjustments to the rim brake calipers (2/3 worn pads)....

ended up putting on a new Conti 5000 25c tyre on the back (contact surface completely flat and TWI's not visible anymore)

and then a new DT swiss P1800 wheel on the front ( blow out when pumping tyre , found rim tape in a sorry state and holes at spoke points ) the wheel braking surface also badly grooved/worn , new wheel is the match of the rear I put on begining of June last summer (who doesn't have new spare wheels lying around? 😁)

cletus · 17-02-2024 12:44PM

My son bought one of the Muc Off cleaning packs on sale in Halfords. The week before last he decided to try it out by spraying the cleaning fluid/soap/whatever it is all over everything, including pads and disks.

I'm currently working myself up to going out to the shed to try get rid of the permanent squeal his brakes have acquired.

Also on the list is the replacement of grip on both of my boys' bikes

cletus · 25-03-2024 01:59PM

Today I figure out where the slow leak in my front tyre was coming from

traco · 01-04-2024 04:45PM

New shift and brake cables fitted and all dialed in on the local run around beater. Old ones were the originals and nasty. Feels all buttery now, just like new. New cables and housing must be one of the cheapest and most rewarding jobs on bike. Only downside was it was poxy cold outside.

cletus · 01-04-2024 05:47PM

https://www.boards.ie/discussion/comment/121962578#Comment_121962578

Good stuff.

You need to get yourself a work shed

traco · 02-04-2024 02:37PM

https://www.boards.ie/discussion/comment/121962768#Comment_121962768

I want a full on man cave - shed isn't going to cut it!

cletus · 02-04-2024 09:38PM

https://www.boards.ie/discussion/comment/121965705#Comment_121965705

A shed doesn't have to be just a shed...

traco · 03-04-2024 09:22AM

I'll be banned from this section now but a shed won't cut it as it needs to hold these, lift, tools, squat rack etc etc:

ednwireland · 03-04-2024 09:43AM

cannondale synapse di2 sitting in bits, trying to figure why battery won't charge.

fix - new charger ffs wondering now whether this is the cause of other battery issues.

di2 is definitely dark arts.

cletus · 03-04-2024 10:31AM

https://www.boards.ie/discussion/comment/121968501#Comment_121968501

It's not a man cave you want, it's a warehouse...

nicksnikita · 03-04-2024 09:06PM

removed rear brake (Ultegra R8000) as it felt sticky when released and was not springing fully open. Removed pads and flushed brake with gt85.

Removed cable from frame, trimmed housing and reinstalled.
It feels better but not 100%. Hopefully it frees up.

I’ll be replacing all cables and bartape in summer so will revisit it then if needs be

Today I did something to my bike thread...

Comments

Welcome!