PVC Back Door & Fitting a roller blind

danjo-xx · 04-11-2023 04:06PM #1

You know the typical half glass/panel double glazed back doors can a roller blind be fitted to them?

also what do ye guys think of the 'Perfect Fit Blinds' and does anybody have any.

thanks.

DublinDilbert · 08-11-2023 09:42PM

Yes a blind can be fitted, just use 4 small self tappers. You only get one go at it, so measure a few times before fitting it.

GreeBo · 08-11-2023 11:48PM

https://www.boards.ie/discussion/comment/121343579#Comment_121343579

You can get 4 goes if you do it right

1st small self tappers

2nd medium self tappers

3rd large self tappers

4th hot glue + curses

:)

GreeBo · 08-11-2023 11:49PM

https://www.boards.ie/discussion/2058321062/pvc-back-door-fitting-a-roller-blind

In these scenarios I have just used some self applied privacy film. Its just "stuck" on with soap water, so if you dont like it you can just peel it off again.

DublinDilbert · 09-11-2023 10:49AM

The last one I did I cut a blind down to size, put tape on the door so I could mark the holes and check the fit. Then screwed the brackets up.

PVC Back Door & Fitting a roller blind

Comments