Help please

bassy · 29-09-2023 10:51AM #1

Hey guys as you can see from the pictures what's the best way to sort it out,as there was fire cement used on the outside and it keeps cracking up bady and becoming loose.

What's best thing to use around it to have a permanent non crack or crumble around the pipe that's going from my

IMG_20230929_104042.jpg

IMG_20230929_104053.jpg

solid fuel Stanley super 90 in to chimney brest wall.

The Continental Op · 29-09-2023 12:07PM

What I did was cut the domed bottom out of an old copper hot water tank and cut a chimney size hole in the middle and used it as a boss to cover all that sort of mess up.

bladespin · 29-09-2023 12:15PM

I'd suggest sleeving the pipe, create a buffer between it and the concrete.

bassy · 29-09-2023 12:19PM

Guys I'm trying to picture what ye are saying,any pictures etc thanks

The Continental Op · 29-09-2023 12:42PM

Finds phone

Takes picture

Posts

bassy · 29-09-2023 12:51PM

If you don't mind me saying that looks a eye soar

The Continental Op · 29-09-2023 01:41PM

https://www.boards.ie/discussion/comment/121172761#Comment_121172761

Of course you can say that. Its coal stove and everything around it gets dusty very quickly. The whole back of the wall behind the stove is copper and my wife likes a verdigris finish on it. The copper boss gets a lot of heat and just covers up more of an eye soar ;-) You could polish it but it would be a never ending job. Just posted it so you can see what I mean by a boss.

whizbang · 01-10-2023 09:00PM

https://www.laoisstone.com/stoves-s/single-wall-chimney-flues/chimney-flue-rosette-45-degree?gclid=CjwKCAjwseSoBhBXEiwA9iZtxmtxJFGO1VHFks76Sa7VPfAHGKjRp27mcLSlsDZP_91eFOuPusSunBoCUMQQAvD_BwE

Help please

Comments