Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

HKC 1070 - PIR point ID

  • 06-06-2023 09:11AM
    #1
    frthdo
    Registered Users, Registered Users 2 Posts: 21 ✭


    I have installed this system 8 years ago with expertise from this forum. All worked so well that I now have to refresh what I learned then.

    Alarm showing fault and internal echo activating. A PIR point ID is causing a problem and blue light was on continuously. I have replaced the PIR and there is no change. I have removed the device from the system and indicates no ID now. I have not been able to add and ID the device. I have disconnected the PIR (+-and data) and displays as such under "Locate devices". I cannot set the alarm as it shows a comms fault from this PIR even though I have disconnected the 3 wires. A second PIR on point ID is operating and displaying as normal in the Devices Menu.

    Any suggestion appreciated.



Answers

Advertisement