Tractor electric harness connector

PureBred · 29-09-2022 07:47PM #1

Anyone know if you can replace these type of connector blocks. Some of the wires are corroded next one side of the block and crimping them is not ideal. Dont want to have to fork out on a new loom!

20220929_193817.jpg

zetecescort · 29-09-2022 08:01PM

can't see why you couldn't use standard block connectors. should be able to get them in any co-op or hardware store

16A 12-Terminal Terminal Strips 10 Pack | Terminal Strips & Blocks | Screwfix.ie

timple23 · 29-09-2022 08:14PM

Count the number of pins on both ends of the connection and search on this website.

https://ie.rs-online.com/web/c/connectors/automotive-electrical-connectors/automotive-connectors/

PureBred · 29-09-2022 08:24PM

https://www.boards.ie/discussion/comment/119681975#Comment_119681975

Those things are part of the reason why I’m looking at the electrics. Cables all seem to corrode around them. I have been sing heat shrink to repair some of the corroded cables but did not want to have to do away with this lighting loom connector, just in case it had to be replaced in future.

PureBred · 29-09-2022 08:25PM

https://www.boards.ie/discussion/comment/119682023#Comment_119682023

Cheers will have a look. Prob no chance of getting the same ones. Although I saw those tools you can buy to remove the pins and add new ones.

Suckler · 02-10-2022 11:00AM

I've used these guys previously -

https://www.carbuilder.com/uk/terminals-and-connectors#/pageSize=20&viewMode=grid&orderBy=11

https://www.vehiclewiringproducts.co.uk/c-50-connectors

Tractor electric harness connector

Comments