Installing a stove instead of a gas fire..

[Deleted User] · 13-05-2022 11:08am #1

Hi folks..

As the title says, I'm putting a 5kw stove in instead of a gas fire..it's a 5kw insert stove and I'm wondering if I really have to change the hearth?..

It's a single piece granite hearth, and the shop suggested I put in a jointed one instead. Reading around online I got the impression it may not be needed, but the installer (who works with the shop) said it could crack.

chancer007 · 13-05-2022 11:18am

We put one in a few years ago, not an insert stove, I preferred mine further out, think there is more heat of it. Fireplace had to be knocked back a bit to accommodate flue, we didnt touch the granite part of the fireplace. We used some stove cement around the flue when it gets attached to back of stove.

[Deleted User] · 13-05-2022 11:29am

Yeah, no, i realise that about the flue etc..my question is really about the base/hearth..

Is there really a need for a jointed base..

Forge83 · 16-05-2022 9:03pm

https://www.boards.ie/discussion/comment/119056159#Comment_119056159

Your hearth will most likely crack. Your choice if you want to take the chance or not. Shop and installer are airing on the side of caution.

[Deleted User] · 16-05-2022 9:18pm

https://www.boards.ie/discussion/comment/119072367#Comment_119072367

Thanks..

Yeah, I've been reconsidering actually alright..would the bit around the fire, the bit in black in this pic need to be replaced too, or would just the base do?..

Forge83 · 17-05-2022 9:14pm

https://www.boards.ie/discussion/comment/119072453#Comment_119072453

Yes that would have to be black granite or cast iron. Cream marble only suitable for gas or electric.

[Deleted User] · 18-05-2022 12:58am

Thanks..yeah, bit the bullet today and went for a replacement..

Installing a stove instead of a gas fire..

Comments