Temperature Selector No Longer Has Different Ranges - Triton T90sr Electric Shower

DarraghR · 30-03-2022 03:37PM #1

Hi Everyone. I moved into my first home in October 2021 and near the middle of this month our shower will no longer variate temperatures when adjusting the bottom knob.

When set to 1 the water is just hot enough to have a shower but nowhere near what we are used to. It is usually set at 2 with the dial at around 2 o'clock. Once 2 is on then no matter what way we move or set the dial the water is absolutely boiling so have to keep moving to avoid getting burned.

Would this be something I could fix myself and is it expensive for parts?

John.G · 30-03-2022 04:09PM

Try re positioning the cover as per "Fitting the Cover" in the attached.

triton_t90sr_user_manual.pdf

30-03-2022 05:51PM

The water is restricted going through the shower. Slower water = hotter water.

Blocked or spurious shower head, blocked hose, blocked filter or airlock is what you should check. Take the head off & see if you can regulate the temperature. Remove the hose and try again.

John.G · 31-03-2022 08:52AM

Is the "SR" pump actually running?, gravity might give some flow without it?

DarraghR · 14-04-2022 08:30PM

Ok so I took the hose and head off which gave normal water levels when changed. I soaked and rinsed both in white vinegar, hot water and baking soda. All working perfect now thanks guys.

I still want to open up the whole unit and use some compressed air to fully clean it.

14-04-2022 08:35PM

I wouldn't do that. Whatever about removing the heating can & doing that but I'd leave the rest of the shower alone

Temperature Selector No Longer Has Different Ranges - Triton T90sr Electric Shower

Comments