Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Plasterboard in an unheated/uninsulated garage

  • 12-12-2021 6:51pm
    #1
    Hyperbollix
    Registered Users, Registered Users 2 Posts: 1,025 ✭✭✭


    I have a block built, single wall garage beside the house. It's plastered on the outside but bare block inside. During the summer I decided to tart it up abit with a few sheets of insulated plasterboard and cover over a concrete block plinth entirely with plywood so I could stack some storage boxes etc....

    I painted the back wall with a cement/waterproofer mixture to seal up the pores of the blocks. A few days later I put up the plasterboard and painted it white. Now that we're in the depths of winter I can see I've made a mistake! The plywood I've put down is damp to the touch and covered in a film of mould, while the plasterboard is destroyed with black mould, especially under a window. Even timber shelving at the other side of the garage is speckled with mildew....

    Am I right in saying that this approach can't be used in an unheated environment? I've no intention of making this garage into a insulated space with a heat source, so what is my best bet when it comes to lining walls, shelving, using plywood etc?



Comments

  • #2
    listermint
    Registered Users, Registered Users 2 Posts: 34,106 ✭✭✭✭listermint


    Is there a moisture source in there? That can even mean is there water coming from roof or through cracked render.



  • #3
    Hyperbollix
    Registered Users, Registered Users 2 Posts: 1,025 ✭✭✭Hyperbollix


    Took off one of the plasterboards panels with a lot of mould on the surface and the wall behind is dripping wet. This is bare block painted with a cement/waterproof mixture and previously would have been dry during the winter. Is that condensation due to outside/inside temperatures, trapped behind the panels? Same thing happening with the plywood on the concrete plinth, discoloured green/black and damp to the touch....



  • #4
    Flinty997
    Registered Users, Registered Users 2 Posts: 12,673 ✭✭✭✭Flinty997


    Is their any damp course in the wall.



  • #5
    the_pen_turner
    Registered Users, Registered Users 2 Posts: 7,524 ✭✭✭the_pen_turner


    What kind of block wall



  • #6
    Pinoy adventure
    Registered Users, Registered Users 2 Posts: 1,004 ✭✭✭Pinoy adventure


    Solid or cavity block built wall ?



  • Advertisement
  • #7
    Hyperbollix
    Registered Users, Registered Users 2 Posts: 1,025 ✭✭✭Hyperbollix


    Would be 9" cavity block, single row. Plastered outside, bare block inside. I assumed since the walls never showed signs of water penetration before that it would be ok to just put up afew sheets of p.board with foil backing. Obviously not.....



Advertisement