What Nail gun is best to fix skirting to concrete block walls

Have you used this yourself ? I have a compressor but I am thinking of going battery operated to make life easier in the long run.

Yep I have done a lot of searching and I am prepared to spend €1000 on a good one as long as it is good. I have a hallway to do then 4-5 bedrooms and kitchen sitting room etc so I have taken into account skirting and architrave for the whole house and to add €100 to each job overall the €1000 works out pretty cheap.

I will be using it on the back when fitting the boards to the concrete. I need to pin them to the wall to add the extra grip I will have 850 cuts to fit and I dont have that long to do it so I would like one person to be fitting the grip adhesive while I start pinning them to the wall overall meaning the install will be fast and long lasting.

I have throught about all of the above but I want the nail gun to pin it to the wall where there is a hallow bit to really hold it in place. I plan on building an extention and doing a lot more work throughout the house over the coming years and I have found that my dewalt kit so far has helped in so many different ways and I would like to get a nail gun to have the same freedom of movement. I am looking into the second fix nailer from dewalt at the moment and its €500 which is not bad if it does the job I need

I have seen that option my only issue is my compressor is not the biggest so it may starve I am thinking of a battery operated one for a few reasons.

I agree I could go hilti but I do have a full dewalt kit and would like to stay around that range i dont need to go all out but I do want the freedom and knowing the tool is there for the years to come for any job I may have