Machinery Prices

kevthegaff · 09-03-2021 8:53pm #1

Lads looking online on jeeps and tractors, prices are gone bloody mad.
Was gona upgrade the skidsteer in November but held off, prices have gone up 5k since. Will they drop when things settle?

Tileman · 09-03-2021 9:06pm

kevthegaff wrote: »

Lads looking online on jeeps and tractors, prices are gone bloody mad.
Was gona upgrade the skidsteer in November but held off, prices have gone up 5k since. Will they drop when things settle?

Everything is gone up . People not spending money on usual going out or drinking or holidays and everyone’s trading up or renovation etc.

timple23 · 10-03-2021 10:06am

Isn't there a supplement in the Farmers Journal with new machinery prices and tractor prices every year. Would make interesting reading comparing this years prices to 2020 prices.

K.G. · 10-03-2021 11:12am

Tileman wrote: »

Everything is gone up . People not spending money on usual going out or drinking or holidays and everyone’s trading up or renovation etc.

And i d say fellas are comfort buying too just to have something new in the yard to play with

Reggie. · 10-03-2021 11:34am

K.G. wrote: »

And i d say fellas are comfort buying too just to have something new in the yard to play with

Might be a hard choice once things open up again and they need money to go out and such

Mooooo · 10-03-2021 11:38am

The increasing price of new gear is dragging g everything up with it. Non mainstream, or what some considered non mainstream anyway, brands are all serious money new as well

cute geoge · 10-03-2021 12:31pm

always cpming on to silage tracors and gear,is in more demand so is price dearer .Then come September more value to be found

lakill Farm · 10-03-2021 12:52pm

cute geoge wrote: »

always cpming on to silage tracors and gear,is in more demand so is price dearer .Then come September more value to be found

I was keeping my eye out for a 20/22ft rake since last October and the winter prices are 25% plus higher than april/May 2020

DBK1 · 10-03-2021 1:03pm

lakill Farm wrote: »

I was keeping my eye out for a 20/22ft rake since last October and the winter prices are 25% plus higher than april/May 2020

It was the same last year as well. I bought a 4 year old 26 foot rake last May for the same price as I would have paid for a 10-12 year old if I had bought it during the previous winter.

When a dealer has a grass machine sitting in his yard it’s in the summer he wants to get rid of it or else he could be looking at it for another 12 months. He won’t sell it cheap at this time of the year as he knows he has plenty of time still to pick up potential customers.

The real trick of the trade is to get lads thinking you’re giving them an out of season deal when for the last few years the prices have always been cheaper in season.

lakill Farm · 10-03-2021 1:21pm

I was eyeing up a wrapper and baler last year at this time. More of a choice came on the market just at the beginning of the season I found as well . Genuine farmer machines with low work where , but realistic the dealers are sitting on older contractor trade ins mostly

I ended up buying a McHale BE wrapper with 11500 bales and a JD baler with 10300 bales on them from new cheaper than I could buy slightly newer machines with 4 times the work done

DBK1 wrote: »

It was the same last year as well. I bought a 4 year old 26 foot rake last May for the same price as I would have paid for a 10-12 year old if I had bought it during the previous winter.

When a dealer has a grass machine sitting in his yard it’s in the summer he wants to get rid of it or else he could be looking at it for another 12 months. He won’t sell it cheap at this time of the year as he knows he has plenty of time still to pick up potential customers.

The real trick of the trade is to get lads thinking you’re giving them an out of season deal when for the last few years the prices have always been cheaper in season.

mengele · 10-03-2021 1:25pm

All im hearing nowadays is that everything is scarce and takes 2 or 3 months to come into stock.

kevthegaff · 18-07-2021 2:54pm

What's a BMW x3 4 wheel drive like on the farm, impossible to get a trooper or pajero

funkey_monkey · 19-07-2021 12:34am

Would they be big enough for towing? I would have thought that an X5 would be better suited, although there does seem to be a lot less of them about now.

kevthegaff · 19-07-2021 6:53am

https://boards.ie/discussion/comment/117630295#Comment_117630295

Be just used for bringing in the cows offroad

blue5000 · 19-07-2021 9:55am

https://boards.ie/discussion/comment/117630624#Comment_117630624

How bad is the cow road? Would an old diesel car with knobby tyres on the front do the job?

funkey_monkey · 19-07-2021 11:14am

https://boards.ie/discussion/comment/117630624#Comment_117630624

Do you mean driving behind the cows walking - or in a trailer?

minerleague · 19-07-2021 11:51am

https://boards.ie/discussion/comment/117631040#Comment_117631040

Sorry to derail thread but is it possible to lift car higher than just bigger tyres, have Golf van here which belonged to an uncle of mine, body work means not worth doing up for road driving but very low to ground for farm.

carscon · 19-07-2021 4:26pm

Is a new holland TL90a too light for loader work with bales of silage?

Make about 400

I wouldn't be hard on a machine

Any help much appreciated

Grueller · 19-07-2021 6:48pm

https://boards.ie/discussion/comment/117633253#Comment_117633253

Handled up to 300 bales a year plus 60 acres of pit silage through a 4' shear grab for 13 years with a TL90. She never gave a bother on the front axle. She had a dry clutch and manual shuttle so the clutch was replaced twice but any dry clutch tractor and loader combo will need that maintenance.

They are a fantastic stockman tractor imo.

carscon · 19-07-2021 6:58pm

Thanks for the reply,

This one has a power shuttle, 6000 hours, for 30k inc vat, very clean

Iv a zetor forterra 9641 no loader which I'm keeping, the garage man tells me I'm not going to be happy in the TL90A because it's a good bit lighter than my zetor

???

Grueller · 19-07-2021 7:01pm

Ah it will be but they have serious grunt for their size. I still have mine as a second tractor and often spread slurry on a 1600 gallon tank with her. She is light but very capable.

carscon · 19-07-2021 7:07pm

Same tank here, you would need a weight on the back when at bales ?

Can they grab a bale with soft hands, turn it up and put it on a trailer without much bother?

kevthegaff · 19-07-2021 8:25pm

https://boards.ie/discussion/comment/117631040#Comment_117631040

Need 4 wheel drive into the fields and bad hills also

Grueller · 19-07-2021 8:59pm

https://boards.ie/discussion/comment/117633999#Comment_117633999

No weight but I use the roller type handler occasionally only. I spike them and wrap them in the yard. Contractor stacks as he wraps.

carscon · 19-07-2021 9:16pm

I don't know what to do

Grueller · 19-07-2021 9:24pm

https://boards.ie/discussion/comment/117634531#Comment_117634531

Would he be happy to give you a demo some day you are at a few bales?

carscon · 19-07-2021 9:57pm

Yeah I'd say he would, hes on the look out of a TS100 or similar

funkey_monkey · 20-07-2021 10:54am

https://boards.ie/discussion/comment/117633999#Comment_117633999

We've always used weight blocks at the back with front end loaders regardless of the size. Takes a lot of pressure off the front axle. If you don't have one front your loader tractor you should seriously look into getting one. We use one which only connects to the arms - can put it off and on in no time.

The middle inch · 21-07-2021 10:01am

https://boards.ie/discussion/comment/117633253#Comment_117633253

The model that came after the TLA series was the T50X0 series. A T5050 would be the replacement for the TL90A. I seem to remember one of the changes was the front axle was upgraded on them, primarily for loader work.

We have a TL70A (no loader), manual shuttle. Never gave a minute's trouble in 14 years.

Machinery Prices

Comments