Filling drilling drill holes

cj maxx · 17-05-2021 12:27AM #1

Hi. I'll be moving in the next month or 2.
Due to mobility issues I put up hand grabs and rails up on the stairs and in the bath ( for showering)
I will be taking these with me when I move because a/ I bought them and put them up. ( full permission from the landlord) and b / I am being forced to move and c/ I will need them in my new house probably.
Screw holes in block I plan just dent with a hammer and skim with compound, sand and paint.
Its the 6mm drill holes (2) in the bath tiles I'm not sure what to do with.
What can I use to fill them ?

Juwwi · 17-05-2021 12:29AM

What colour are the tiles ?

Grout is probably your best bet .

cj maxx · 17-05-2021 12:42AM

Light blue. But grout was what I was thinking.

Padre_Pio · 17-05-2021 12:43AM

Would anyone notice if they were just grouted with white or sand colour grout?

cj maxx · 17-05-2021 12:51AM

Padre_Pio wrote: »

Would anyone notice if they were just grouted with white or sand colour grout?

You know , just thinking about it I realise I'm not bothered too much what it looks like . The F'er is throwing me out! As long as the grout keeps water from damaging the tiles, sod him

CJhaughey · 17-05-2021 10:35AM

Shoot some Tec 7 into the hole and call it good.

cj maxx · 19-05-2021 12:54AM

CJhaughey wrote: »

Shoot some Tec 7 into the hole and call it good.

I think that's what I'll go with

Filling drilling drill holes

Comments