Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Mechanic question

  • 13-05-2021 9:36pm
    #1
    ballyharpat
    Registered Users, Registered Users 2 Posts: 1,823 ✭✭✭


    Sorry if I’m in the wrong place, I’m on the phone and can’t find the mechanic thread-

    I have a cannondale topstone 0 (aluminium), it currently has a grx crank with a 1.37 x24 threaded bottom bracket- I’m looking for a powermeter, and this one came up- Sram gxp shaft, 24mm on drive side, 22mm on non drive side, carbon cranks, 130 bcd.- would I be able to get a bottom bracket to fit ?
    Tia


Comments

  • #2
    bikedude
    Registered Users, Registered Users 2 Posts: 155 ✭✭bikedude


    You probably will need to buy a matching Sram bottom bracket to fit the cranks. I am almost sure they will have the option available to fit the treaded bottom bracket on the bike. https://www.sram.com/en/sram/models/bb-gxp-a1

    Or you can change the left arm on the GRX and get something like that

    https://www.sigmasports.com/item/Stages-Cycling/G3-Power-L-Shimano-GRX-RX810-Power-Meter/PDAX


  • #3
    nilhg
    Registered Users, Registered Users 2 Posts: 5,161 ✭✭✭nilhg


    ballyharpat wrote: »
    Sorry if I’m in the wrong place, I’m on the phone and can’t find the mechanic thread-

    I have a cannondale topstone 0 (aluminium), it currently has a grx crank with a 1.37 x24 threaded bottom bracket- I’m looking for a powermeter, and this one came up- Sram gxp shaft, 24mm on drive side, 22mm on non drive side, carbon cranks, 130 bcd.- would I be able to get a bottom bracket to fit ?
    Tia

    With 130mm BCD you won't be able to fit chainrings to give you anything like the gearing you currently have, probably be stuck with 53/39 up front.

    I'm only after laying my hands on a Topstone, crank based PM looks the way to go.


Advertisement