Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

QD stud issues

  • 03-05-2021 10:23am
    #1
    Registered Users, Registered Users 2 Posts: 139 ✭✭


    Hi guys
    I normally have a Harris bipod attached to the rifle with no issues but when I remove it and just have the sling clipped on there is a tendency for the stud to unwind ( loosen).
    My fear is it will eventually rip out the threads in the stock and then require a new one to be drilled.
    Any good solutions out there.
    Thanks
    PV


Comments

  • Registered Users, Registered Users 2 Posts: 1,175 ✭✭✭Richard308


    Hi guys
    I normally have a Harris bipod attached to the rifle with no issues but when I remove it and just have the sling clipped on there is a tendency for the stud to unwind ( loosen).
    My fear is it will eventually rip out the threads in the stock and then require a new one to be drilled.
    Any good solutions out there.
    Thanks
    PV
    Maybe a bit of locktie or epoxy.


  • Registered Users, Registered Users 2 Posts: 2,025 ✭✭✭deeksofdoom


    Hi guys
    I normally have a Harris bipod attached to the rifle with no issues but when I remove it and just have the sling clipped on there is a tendency for the stud to unwind ( loosen).
    My fear is it will eventually rip out the threads in the stock and then require a new one to be drilled.
    Any good solutions out there.
    Thanks
    PV

    Glue it, I think nearly everyone does that.


  • Registered Users, Registered Users 2 Posts: 809 ✭✭✭ejg


    Green / strong Loctite is what we use on our new stocks.
    edi


  • Registered Users, Registered Users 2 Posts: 139 ✭✭Paddyviking


    Thanks guys
    Looks like glue is the answer
    PV


Advertisement