Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

WTD: GXP Crankset (MTB)

  • 09-04-2021 12:41PM
    #1
    g0g
    Registered Users, Registered Users 2 Posts: 2,865 ✭✭✭


    Looking to source a cheap second hand GXP (I'm told) crankset. It's a replacement for a SRAM GX crankset. Don't need the chain ring/pedals as mine are fine. Anyone got an old working one? It's a 1X setup if that matters.


Comments

  • #2
    CramCycle
    Moderators, Sports Moderators Posts: 26,777 Mod ✭✭✭✭CramCycle


    What is cheap? I have an Easton EC90 crankset with chainring (1X, 40t) for sale on another thread, no reasonable offer refused as otherwise its going on a hack bike at the end of the month.


  • #3
    g0g
    Registered Users, Registered Users 2 Posts: 2,865 ✭✭✭g0g


    CramCycle wrote: »
    What is cheap? I have an Easton EC90 crankset with chainring (1X, 40t) for sale on another thread, no reasonable offer refused as otherwise its going on a hack bike at the end of the month.
    A lot cheaper than what you're looking for so I won't offend you with an offer! I was offered a GX crank new around 120 or 150 I think it was. The guy said I might pick up an old one around 50 quid. Already have a new bottom bracket and I don't need to change the chainset (34T). I'm contemplating the AliExpress route (posted in the bike maintenance thread).
    For my own learning is an Easton EC90 going to automatically be compatible with my setup.


  • #4
    OTG
    Registered Users, Registered Users 2 Posts: 85 ✭✭OTG


    I've a few sets of these, not GXP but includes a new bottom bracket, the BB is English Threaded, so fits regular frames 68-72mm shelled frames. I've used these cranks with regular hollowtech II MTB BB too so easy to get replacement.
    I have these cranks in 170mm and 175mm
    https://www.adverts.ie/bike-group-sets/fsa-v-drive-mtb-crank-set/23437523


  • #5
    g0g
    Registered Users, Registered Users 2 Posts: 2,865 ✭✭✭g0g


    OTG wrote: »
    I've a few sets of these, not GXP but includes a new bottom bracket, the BB is English Threaded, so fits regular frames 68-72mm shelled frames. I've used these cranks with regular hollowtech II MTB BB too so easy to get replacement.
    I have these cranks in 170mm and 175mm
    https://www.adverts.ie/bike-group-sets/fsa-v-drive-mtb-crank-set/23437523
    Thanks for the offer but sounds complex for my skillset! :) Only just put a new BB into it plus I think the BCD for my existing chainring is something like 94. Think it'll be easiest finding something I can transfer my spider thingy and chainring onto whereas yours has the spider part built in.


Advertisement
Advertisement