Larch beams... Ideas on paint

ShamNNspace · 20-03-2021 03:18PM #1

I've two larch beams here, they're 10'x6' new but I've planed and sanded them trying to get an oldish look on them. they will be both decorative and load bearing. Wonder has anyone any ideas on which paint to use as I wouldn't like to ruin them, ive heard someone mention painting larch with tea to get a distressed look on them, any ideas tia, will post a picture

ShamNNspace · 20-03-2021 03:19PM

Picture of them, they're 12' long and going into a bedroom

romaderwdcsax · 20-03-2021 04:54PM

ShamNNspace wrote: »

Picture of them, they're 12' long and going into a bedroom

Lovely timber. Have a look at osmo oil or a sikkens product for coating the timber

Lumen · 20-03-2021 07:48PM

You can accelerate the natural ageing of larch with a product like Sioo:X.

It's designed for external applications but I don't see why you couldn't apply it, leave the beams outside for a couple of weeks, wetting them regularly to help the chemical reaction.

You do need an open surface though, so no finer than 60 grit sanding.

ShamNNspace · 20-03-2021 09:02PM

Lumen wrote: »

You can accelerate the natural ageing of larch with a product like Sioo:X.

It's designed for external applications but I don't see why you couldn't apply it, leave the beams outside for a couple of weeks, wetting them regularly to help the chemical reaction.

You do need an open surface though, so no finer than 60 grit sanding.

Thats serious stuff, had a look there, at the moment I'd nearly be afraid to chance using it in case I destroy them but I wont rule it out.
I sanded them with a belt sander and then finished with an orbital sander but I could go over them again with a rough belt
The burnishing doesn't do it at all for me at all so that might suit, I'll see im open

keno-daytrader · 22-03-2021 01:25PM

We used Danish oil on our beams. Darkened them up but nothing to dark.

ShamNNspace · 22-03-2021 01:40PM

keno-daytrader wrote: »

We used Danish oil on our beams. Darkened them up but nothing to dark.

Thanks for the reply, any pic of how they came out? was the wood newly machined?

keno-daytrader · 23-03-2021 12:59PM

ShamNNspace wrote: »

Thanks for the reply, any pic of how they came out? was the wood newly machined?

Ill try and find a b4 and after shot.

Ours came straight from the sawmill already planed, I used an orbital sander to finish them.

listermint · 23-03-2021 01:11PM

Always test on off cuts first. Rule number one

Larch beams... Ideas on paint

Comments