Curtains on Internal Insulation

Old Perry · 11-10-2020 09:36PM #1

Hi. Recently had 50mm of internal insulation lined with plasterboard installed. just wondering the best way to hang the curtains back up.
do need to drill back to the concrete or is there other options?
Thanks.

martinr5232 · 11-10-2020 09:39PM

I hang a piece of 4x1 timber the length of the curtain pole with 100mm frame fixers into the block work then screw the curtain pole onto the timber.

looksee · 12-10-2020 08:54AM

If you do decide to drill through to the concrete, make sure you are clear of the lintel, they are almost impossible to drill into. The timber strip is the alternative, though imo it works better visually with the plastic rail than with poles.

Mary contrary · 19-10-2020 09:08AM

Hi, these might help http://GRIPIT PLASTERBOARD FIXING 18 X 14MM 8 PACK (685GK)
.. they are GRIPIT PLASTERBOARD FIXING. They come in different sizes depending on the weight you want to hang so make sure to get the right one..

awec · 19-10-2020 12:00PM

Gripits (and most other plasterboard fixings) don't really work with insulated plasterboard.

mick121 · 19-10-2020 01:04PM

4x1 planed timber fixed to the wall and painted the same as the wall.As it's only 50mm slab you can fix directly without the 4x1 using 120mm screws and plugs.

Curtains on Internal Insulation

Comments