Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Joust hangers ( or similar)

  • 28-05-2020 08:15PM
    #1
    2012paddy2012
    Registered Users, Registered Users 2 Posts: 2,880 ✭✭✭


    Hi all
    ( joist hanger/brackets)
    Just looking for a bag of these need about 50 !!
    Or some thing similar / cheaper , just to put battons from one wall to another ...
    any advice appreciated

    (Timber 3x2)


Comments

  • #2
    Dr_Colossus
    Registered Users, Registered Users 2 Posts: 3,418 ✭✭✭Dr_Colossus


    Probably not going to get much cheaper than that in your link depending on postage. These look similar in Goodwins for €1.14 each when buying that quantity:
    https://www.goodwins.ie/products/Timber-Hanger-44x68mm-Mini-Speedy-.html?filter_set[]=1,54,633


  • #3
    2012paddy2012
    Registered Users, Registered Users 2 Posts: 2,880 ✭✭✭2012paddy2012


    Dr_Colossus wrote: »
    Probably not going to get much cheaper than that in your link depending on postage. These look similar in Goodwins for €1.14 each when buying that quantity:
    https://www.goodwins.ie/products/Timber-Hanger-44x68mm-Mini-Speedy-.html?filter_set[]=1,54,633
    They seem ideal fair play , I googled around couldn’t find them! Timber I have is slightly smaller than 3x2 I wonder are those hangers very big for that size timber , do you know ? Not good at working out dimensions !!!


  • #4
    Dr_Colossus
    Registered Users, Registered Users 2 Posts: 3,418 ✭✭✭Dr_Colossus


    Should be about right and as close as you'll get without making them. Timber is very annoying as 3x2 is rarely the same from different suppliers. The last few lengths of 3x2 I got were 70x42 square but prior to that they were 75x45 rounded. If your 3x2s are much narrower than 44mm then there may be some play but the brackets should flex somewhat so take that into account before drilling the holes in the wall.


  • #5
    2012paddy2012
    Registered Users, Registered Users 2 Posts: 2,880 ✭✭✭2012paddy2012


    Dr_Colossus wrote: »
    Should be about right and as close as you'll get without making them. Timber is very annoying as 3x2 is rarely the same from different suppliers. The last few lengths of 3x2 I got were 70x42 square but prior to that they were 75x45 rounded. If your 3x2s are much narrower than 44mm then there may be some play but the brackets should flex somewhat so take that into account before drilling the holes in the wall.

    Sound. I have battens on house wall and side entrance .. I want to cover it Over. I was going to use these to keep the bridges level well as best as possible I think all timber is a bit warped ! Doesn’t help ! Cheers


Advertisement
Advertisement