Act entry and Act smart fob reader.

Derekdoc121 · 05-03-2018 08:35PM #1

Hi folks, just wondering has anyone knocked across door not releasing the mag lock with a act entry and act smart fob reader on outside and push switch and green bgu on inside with act entry receiver at reception area.
Working for maybe 15 releases then nothing and might come back on stream again and so forth.
This is the second one in 2 weeks I have come across these worked 100% up to recent, they were installed about 3 yrs ago.
If anyone can advice or help it would be great.

The Hill Billy · 05-03-2018 09:58PM

Welcome to boards. I think your query relates to a security/access system, so have moved your thread here.

@Mods - If I completely misunderstood this feel free to move to a more appropriate forum.

tHB

kub · 05-03-2018 10:12PM

Derekdoc121 wrote:

Hi folks, just wondering has anyone knocked across door not releasing the mag lock with a act entry and act smart fob reader on outside and push switch and green bgu on inside with act entry receiver at reception area. Working for maybe 15 releases then nothing and might come back on stream again and so forth. This is the second one in 2 weeks I have come across these worked 100% up to recent, they were installed about 3 yrs ago. If anyone can advice or help it would be great.

What rating is the Power Supply unit?
Is it a Mini Mag or a Standard one?

Derekdoc121 · 05-03-2018 10:30PM

kub wrote: »

What rating is the Power Supply unit?
Is it a Mini Mag or a Standard one?

Mini mag lock.
24v 3amp psu

kub · 05-03-2018 11:08PM

Derekdoc121 wrote: »

Mini mag lock.
24v 3amp psu

Is this your own premises that you are working on ?

Derekdoc121 · 05-03-2018 11:13PM

no, its a site i service.

colm_mcm · 05-03-2018 11:15PM

Think you need to be PSA registered to do access control these days, you may well be, just be mindful if you aren’t.

Derekdoc121 · 05-03-2018 11:22PM

Hi Colm, Have PSA licence. Was just wondering if this fault was popping up with anyone else , contacted manufacture and didnt get a answer to problem tbh. usually these products are bomb proof but 2 are giving issues as of recent times.

Mr. G · 10-03-2018 02:58PM

Derekdoc121 wrote: »

Hi folks, just wondering has anyone knocked across door not releasing the mag lock with a act entry and act smart fob reader on outside and push switch and green bgu on inside with act entry receiver at reception area.
Working for maybe 15 releases then nothing and might come back on stream again and so forth.
This is the second one in 2 weeks I have come across these worked 100% up to recent, they were installed about 3 yrs ago.
If anyone can advice or help it would be great.

When you say it sometimes releases, is this when you release from the PTE at the door or from the ACTentry receiver at reception?

I know that I heard complaints on the ACTentry before that it was prone to issues. First thing have you looked at the release button on the intercom and checked all connections? Although there are plenty of intercom systems, Comelit are the most common and seem to be less prone to issues.

Derekdoc121 · 10-03-2018 03:54PM

Mr. G wrote: »

When you say it sometimes releases, is this when you release from the PTE at the door or from the ACTentry receiver at reception?

I know that I heard complaints on the ACTentry before that it was prone to issues. First thing have you looked at the release button on the intercom and checked all connections? Although there are plenty of intercom systems, Comelit are the most common and seem to be less prone to issues.

Problem sorted it was intercom / release side board was gone faulty , you were bang on. I was told they do give problems espically when used a lot.

Thks

Act entry and Act smart fob reader.

Comments