Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Hkc No RKP comms

  • 03-03-2018 06:52AM
    #1
    Registered Users, Registered Users 2 Posts: 1,344 ✭✭✭


    My power went last night around 10pm. It’s still off. At 5am alarm starts sounding internal and external although volume not as loud as normal thankfully. External stopped eventually. Internal still going.

    Keypad displays above error. Cannot input anything on keypad. Any ideas? I’m ready to take a hammer to the internal bell.


Comments

  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Try powering the system down completely and power back up again.
    Have you disconnected or tried disconnecting any cables?


  • Registered Users, Registered Users 2 Posts: 1,344 ✭✭✭Cloudio9


    KoolKid wrote: »
    Try powering the system down completely and power back up again.
    Have you disconnected or tried disconnecting any cables?

    removed and replaced battery. Power came back while I was out getting the battery and it seems to be ok now. Battery is about 5 years old. Don’t know if the battery was the problem but I guess 5 years is about time to replace it anyway.


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Unlikely the battery , just a little corruption.


  • Registered Users, Registered Users 2 Posts: 2 Aidan Fitzgerald


    Wired house alarm 4 wires what amp fuses in panel hkc



  • Registered Users, Registered Users 2 Posts: 12,036 ✭✭✭✭altor


    8/12 Mains fuse is 250mA/250V

    Fuses 1/4 are 800ma

    Battery fuse is 4A


    10270 Mains fuse 3.15ma/250V

    Other fuses are resettable fuses on the 10270



  • Advertisement
Advertisement