Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Zetor 8111 torque

  • 20-11-2017 12:12AM
    #1
    shanemc123
    Registered Users, Registered Users 2 Posts: 100 ✭✭


    Hi everyone just looking to know did anyone come across this,I got a zetor 8111 the lift and pto is working fine but the torque(dual power)lever isn't engaging?any ideas


Comments

  • #2
    stock>
    Registered Users, Registered Users 2 Posts: 755 ✭✭✭stock>


    Yes and it requires surgery to fix...............................
    Split at the bell housing, remove the intermediate box..........................


  • #3
    shanemc123
    Registered Users, Registered Users 2 Posts: 100 ✭✭shanemc123


    would u beilieve it was working since it was low in oil and the filters were dirty,I cleaned the filters and topped up the oil left it idle for 2 weeks and I went out tonight and same story


  • #4
    stock>
    Registered Users, Registered Users 2 Posts: 755 ✭✭✭stock>


    shanemc123 wrote: »
    would u beilieve it was working since it was low in oil and the filters were dirty,I cleaned the filters and topped up the oil left it idle for 2 weeks and I went out tonight and same story

    So is it working or not..................
    one would have expected that the basics were checked as in oil & filters etc prior to posting on line..................


  • #5
    shanemc123
    Registered Users, Registered Users 2 Posts: 100 ✭✭shanemc123


    yes the filters are fine and the oil level,the torque is stuck in low and the pto is not stopping


Advertisement
Advertisement