Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Removing roller blind

  • 15-11-2017 03:00PM
    #1
    Registered Users, Registered Users 2 Posts: 412 ✭✭


    Hi,

    I'm trying to remove roller blinds and am having some difficulty. My understanding is that I start with the side opposite the chain, photographed as shown.

    I think I've to pull the pin (arrow pointing at it) straight down with pliers etc but don't want to try it in case I break something. If someone could describe how to do this or has a link to instructions etc I'd much appreciate it.


Comments

  • Registered Users, Registered Users 2 Posts: 5,070 ✭✭✭homer911


    MOTM wrote: »
    Hi,

    I'm trying to remove roller blinds and am having some difficulty. My understanding is that I start with the side opposite the chain, photographed as shown.

    I think I've to pull the pin (arrow pointing at it) straight down with pliers etc but don't want to try it in case I break something. If someone could describe how to do this or has a link to instructions etc I'd much appreciate it.


    You push it towards the wall


  • Registered Users, Registered Users 2 Posts: 412 ✭✭MOTM


    homer911 wrote: »
    You push it towards the wall

    Sorry for asking a stupid question but what do I push towards the wall? Just the pin or the blind or the bit around the pin?


  • Registered Users, Registered Users 2 Posts: 331 ✭✭sibersha


    I had a similar one, if I remember correctly I used a small flat head screw driver to push the pin outwards (towards the wall) and it clipped out. You can then slide the blind out from the window.


  • Registered Users, Registered Users 2 Posts: 412 ✭✭MOTM


    sibersha wrote: »
    I had a similar one, if I remember correctly I used a small flat head screw driver to push the pin outwards (towards the wall) and it clipped out. You can then slide the blind out from the window.

    That worked thanks. Dismantled the blind easily after that. All systems go!


Advertisement
Advertisement