Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Wall Mounting A Sharp Aquos.

  • 13-11-2017 11:15pm
    #1
    Registered Users, Registered Users 2 Posts: 2,138 ✭✭✭


    Hi folks, just wondering if anyone has mounted one of these on a wall. Went to do it tonight and according the the manual there should be holes about two thirds of the way up the back for it, which there isn't. Looking at the back of it the only place I can see that bracket can go is on the protective box area over the different ports but it looks a bit low to be using to be honest. Has anyone got experience of hanging them, the model is LC-55CFE6241k? Thanks!!


Comments

  • Registered Users, Registered Users 2 Posts: 28,330 ✭✭✭✭drunkmonkey


    There should be 4 screws to unscrew at the back of it, pg 10 https://www.manualslib.com/manual/989298/Sharp-Lc-32che6241k.html?page=10#manual
    Make sure you don't drill through any cables in the wall, get a cable finder or cut the power and watch what your doing, have a look in the hole with a light to make sure your not going through anything you shouldn't be.
    Is it going into concrete or plasterbaord with battons, make sure you locate the battons if not concrete.


  • Registered Users, Registered Users 2 Posts: 73,477 ✭✭✭✭colm_mcm


    There's 4 screws you need to remove, you use these holes for the bracket


  • Registered Users, Registered Users 2 Posts: 73,477 ✭✭✭✭colm_mcm


    IMG_0274.png


  • Registered Users, Registered Users 2 Posts: 2,138 ✭✭✭rpurfield


    That's what I mean though lads the back of the TV hasn't got the screws like in that picture, I looked it up online before i posted. the only four screws in it are lower and in the panel that's over the ports for HDMI etc. there isn't an oval piece as per the picture.


  • Registered Users, Registered Users 2 Posts: 28,330 ✭✭✭✭drunkmonkey


    Is there 4 holes that bolts fit into that are empty?

    There should be, is that the same maual you have?


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 2,138 ✭✭✭rpurfield


    Is there 4 holes that bolts fit into that are empty?

    There should be, is that the same maual you have?

    No there's absolutely nowhere on the back that you could say that's where the mount goes it's a strange one


  • Registered Users, Registered Users 2 Posts: 73,477 ✭✭✭✭colm_mcm


    Can you post a pic of the back of the tv? Are there any acres on the back with arrows pointing at them?


  • Registered Users, Registered Users 2 Posts: 2,138 ✭✭✭rpurfield


    colm_mcm wrote: »
    Can you post a pic of the back of the tv? Are there any acres on the back with arrows pointing at them?

    Gonna be a job of work to do that to be honest given the shelf its on at the minute but no theres no arrows


  • Registered Users, Registered Users 2 Posts: 10,070 ✭✭✭✭dodzy


    rpurfield wrote: »
    Gonna be a job of work to do that to be honest given the shelf its on at the minute but no theres no arrows

    Post the model number. What size is it ? How old ? Unlikely that there would be no wall mount points, but not impossible.


Advertisement