Winch pulley for Clothes line - bracket to attach it to a galavised pole?

thekooman · 19-07-2017 02:00PM #1

hi all,
need to get a winch pulley to drop and roll up the line; something like this will do. https://www.amazon.co.uk/Sealey-GWE1200M-Capacity-Geared-Winch/dp/B00E1JKW86/ref=sr_1_4?ie=UTF8&qid=1500464693&sr=8-4&keywords=winch

but where could i get a bracket to attach to this and then bolt it to the galvanised pole (50mm or so, the usual clothes line scenario.)? something like a u bolt might work... maybe even a heavy duty tie wrap?
any ideas would be good.

https://www.amazon.co.uk/Shelly-Pole-Mast-Clamp-Bracket/dp/B01CTY8TX4/ref=pd_sbs_23_3?_encoding=UTF8&psc=1&refRID=WXRGWYY6KW0RAPG3S748

Audioslaven · 19-07-2017 04:07PM

Hi,

Get a length of flat iron or angle iron, cut a few feet of it and weld it to the pole. You can then drill out the holes for the wrench and screw it on

muffler · 19-07-2017 04:12PM

I dont think you need to go the expense of getting a winch. A normal clothes like pulley would do and if necessary fix or screw bolts or cup hooks to upright or nearest wall at 2 pre selected heights for line fully up and down and make 2 loops in the line to catch the bolts or hooks. A tenner would cover the whole thing and you would only have to visit your nearest hardware shop

thekooman · 19-07-2017 04:19PM

Ive a pulley on both lines already. just thought id make up something for the wife when she is putting out the clothes. the flat iron and weld it on might be the answer.

Winch pulley for Clothes line - bracket to attach it to a galavised pole?

Comments