Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

RTE 1 No signal

  • 05-06-2017 10:53AM
    #1
    GLCC
    Registered Users, Registered Users 2 Posts: 72 ✭✭


    Hi All,

    I have an Amiko mini Combo receiver and RTE 1 is currently giving no signal. All other terrestrial channels are OK. I did a rescan but no sign of RTE 1. I have 2 other boxes and RTE 1 is working fine on both.

    Thanks,
    GLCC.


Comments

  • #2
    The Cush
    Registered Users, Registered Users 2, Paid Member Posts: 16,394 ✭✭✭✭The Cush


    RTÉ 1 is carried on the same frequency as be3, RTÉ Jr/RTÉ One +1.

    If you are missing these channels also, then you have a signal/connection issue to the box. Check the cable connections to the box, maybe the signal isn't good enough.

    If you're only missing RTÉ 1 then it's likely a box or software issue.

    Have you tried swapping the box to the good TV points to check if the problem follows?


  • #3
    EndKore
    Registered Users, Registered Users 2 Posts: 13 ✭EndKore


    Check the coax plug to see if its loose if it is just give it a few twists


  • #4
    GLCC
    Registered Users, Registered Users 2 Posts: 72 ✭✭GLCC


    cheers for the replies lads. A loose coax plug was the problem.


  • #5
    GLCC
    Registered Users, Registered Users 2 Posts: 72 ✭✭GLCC


    GLCC wrote: »
    cheers for the replies lads. A loose coax plug was the problem.

    Lads, I am having another problem with this box. When I do a terrestrial scan it's finding all channels but not saving the mux 2 ones. Any ideas ?


Advertisement