Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

PV Solar system-the craziest DIY project probable

  • 27-12-2015 5:55pm
    #1
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭


    Hello,

    After few months of living with the green virus,I have finally decided to look in to the bank account and start making final enquires.

    I did the numbers and I made the RoI over 10 (ten) years period. I do realise and I'm aware that is not going to be fully financially attractive but I will enjoy switching the switch knowing that is free cost and no profit making companies are at the end of the wire. Cannot share the feeling last summer, when after installing 40 solar tubes we were able to make shower without hearing the combi boiler kicking in to heat the water...fascinating feelings.

    The house will be rewired and only the cooker will be left directly connected to rid, while all other outlets will go trough the PV output.
    Panels will face south side most of the time but in winter, I may have to settle on maybe back garden with only half output. But, that will be compensated with low temperature...
    Batteries and all switching/inverting equipment will be housed in to a new build outside the house, that will have computer monitored ventilation and temperature at 25" permanent.
    We are a energy conscious family, not going crazy with electrical equipment but keeping all under control, as we come and go out of rooms. I do have my wife's support, therefore I feel that is, well, on a positive side.


    So, i have settled on:

    Solar Panels
    Because "the difference is in details", 8 + 8 LG PV solar panels like these ones H E R E .
    Technical info H E R E .
    One of the convincing multimedia presentation here:



    They are the 2015 one of the best panels and I hope it swill still be up there, for the next 10 years.
    8 will be installed in the roof, facing south side of the planet.
    8 will be installed on two trackers, in the back garden, built like in this video:



    They will be connected in series and parallel, to give best voltage and amps, total output in Watts been 2400W per array.
    Few panels will have a blocking diode due to chimney shadowing in the morning.
    Cost, cheaper I found at around €300 ish.


    Battery Chargers

    Based on Outback FlexMax 80 Charge Controllers from H E R E .
    I'll have two of them, each been fed from one of the array.
    They will be over-dimensioned, designed by manufacturer to take 80A but I want to keep them running nice and sweet at 48V and 50A.
    Cost, around €600 each.


    Battery Bank

    I'm in the process of getting quotations from 3 different suppliers for these one H E R E.
    Trojan L-16RE-A 6v 360Ah.
    Cheaper I found is around €326.56
    I will have 4 units in series at 6V giving 24V and 360Ah and then in parallel outputting an 48V and around 700Ah.
    Decided to go with Trojan as they are in my budget, are premium Renewable Equipment and ,even if I may have to buy the units from the continent, i have a Dublin based support company handy.


    Inverter DC to AC

    Again, I've decided to go for Outback GVFX3048E grid tie invertor as this one H E R E.
    Input taken from the batteries and giving a max 3000W in AC output.
    I guess that will allow for few heavy devices in the house been powered at the same time. We just have to be aware if one is using the wash machine and iron/hoover at the same time (is a small house so we can communicate easy).
    Cost, around €1,500.

    Other parts:

    Of course, part of the beautiful designed Outback Power Communication system is the H U B ,the FlexNET and the control MATE.
    In the short term, i am waiting for feedback on the lead-acid based batteries equaliser / balancer, using a smart monitoring circuit.
    Cabling, maxim run is around 10-15m, using 14mm2 cables from PVs to control room.



    Future plans is to integrate it with grid tied invertor, ABB 5Kw Irish certified model, but still waiting for the big boys to share the slice of the cake.

    Thanks for reading, i do appreciate the feedback.


«1

Comments

  • #2
    power101
    Registered Users, Registered Users 2 Posts: 300 ✭✭power101


    Just on installation I would wait until the end of the first quarter 2016 to see if a FIT is brought in for PV.


  • #3
    [Deleted User]
    Posts: 5,238 ✭✭✭ [Deleted User]


    Without delving too far into the datasheets it looks pretty mad. Why the solar trackers? Why dual axis trackers, is it so difficult elevate them ~5° every month? Do you really expect to gain so much on cloudy days?
    Those actuators will suffer water ingress I don't care what the IP rating is it can't be an actuator and be completely sealed.

    The modules are miss-matched to your bank. For a reliable robust PWM controller system I'd go low voltage and by all means buy a share in a copper mine. So with a battery voltage of 48V a module VOC of 30V in paired series or 60V. With a MPPT charge controller bung the load in series and save on copper.

    24V in parallel with 24V is 24V.
    6V are not ideal for a house. If one cell dies you lose 3 and it's more difficult to rotate the weak cells to the centre of the bank.

    A charged battery is useless why do you want 2 systems, one in case the other fails or surplus harvest to requirements?
    Surplus won't really happen imho the more you make the more you'll use, substitute the other fossil fuels in your life for photons. Forget about the charge controller stick the panels direct to battery and run charge diverters.

    Flush mount panels can make you a net producer for a fraction of the cost. A one horse off-grid system will still let you down.

    What are the round trip energy returns on heating batteries?

    If your "smart" equaliser is monitoring 24 hydrometers then send me a link, if it's not then I say snake oil.

    Nice inverter. I've seen them go on ebay for £800.

    Your charge controllers are not overspec-ed they're near the load limit you need to allow 20% overhead for cloud edging and low temperature uprating.

    Why do you want a "proprietary communication network" :confused: :mad: :confused:


    My advise would be to start with a used cheapo serviceable battery bank. There's a steep learning curve. Everyone kills their first battery. Try it on some forklifts first.

    Happy harvesting.

    €0.02


  • #4
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    power101 wrote: »
    Just on installation I would wait until the end of the first quarter 2016 to see if a FIT is brought in for PV.

    You may be right but who knows what kind of conditions they may impose.
    Not that I wanna give them ideas free of charge but my project is DIY. If they says yes, it will be subsidies or FiT applied but has to be installed and/or certified by "only this" company that has the right skills and only right skills in the industry !?

    I do agree the certification related to minimum absolute standards but not sure yet re others, such as grid-tie inverter, as at the moment only ABB is certified with Irish standard, so far. My Outback chosen model is not, despite having all other EU conformation certificates.

    Late Edit:
    Another thing to be taken in consideration, i stand to be corrected but if today price for a PV solar is lets say at around €1/Watt,after the decision to apply FiT, could be that the price will increase more than €1 or could drop to less !? Will that affect the installation only or the supply chain / channels as well ? I remember before when were no grants, that a job costs an amount then once grants been introduced, suddenly prices increased by all participants in the supplying/installing/supporting the solution, increase transferred and paid by the poor end user.

    Only reason to wait is to see if the EU Commission may "adjust" the surcharge / lobby expenses /oil protective taxes applied to "Made in China" PV panels ,as if they will be reduced or dropped.

    Also, as is DIY I could prove that has been installed "tomorrow" or after the day FiT has been approved. Kind of cheating here...

    We will see...
    Thanks.


  • #5
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Sir Liamalot wrote: »
    Without delving into too far into the datasheets it looks pretty mad. Why the solar trackers? Why dual axis trackers, is it so difficult elevate them ~5° every month? Do you really expect to gain so much on cloudy days?
    Those actuators will suffer water ingress I don't care what the IP rating is it can't be an actuator and be completely sealed.

    The modules are miss-matched to your bank. For a reliable robust PWM controller system I'd go low voltage and by all means buy a share in a copper mine. So with a battery voltage of 48V a module VOC of 30V in paired series or 60V. With a MPPT charge controller bung the load in series and save on copper.

    24V in parallel with 24V is 24V.
    6V are not ideal for a house. If one cell dies you lose 3 and it's more difficult to rotate the weak cells to the centre of the bank.

    A charged battery is useless why do you want 2 systems, one in case the other fails or surplus harvest to requirements?
    Surplus won't really happen imho the more you make the more you'll use, substitute the other fossil fuels in your life for photons. Forget about the charge controller stick the panels direct to battery and run charge diverters.

    Flush mount panels can make you a net producer for a fraction of the cost. A one horse off-grid system will still let you down.

    What are the round trip energy returns on heating batteries?

    If your "smart" equaliser is monitoring 24 hydrometers then send me a link, if it's not then I say snake oil.

    Nice inverter. I've seen them go on ebay for £800.

    Your charge controllers are not overspec-ed they're near the load limit you need to allow 20% overhead for cloud edging and low temperature uprating.

    Why do you want a "proprietary communication network" :confused: :mad: :confused:


    My advise would be to start with a used cheapo serviceable battery bank. There's a steep learning curve. Everyone kills their first battery. Try it on some forklifts first.

    Happy harvesting.

    €0.02


    Well Sir.. thanks for giving me a lots of "harvesting" material to "harvest" over a couple of days.
    I am much obliged for the feedback, recommendations.
    Thanks.


  • #6
    [Deleted User]
    Posts: 5,238 ✭✭✭ [Deleted User]


    Photon harvesting was the intended meaning.

    Afaik you only need a sparks with all the right acronyms to sign off on the grid tie inverter. Upstream of that is grey.


  • Advertisement
  • #7
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Sir Liamalot wrote: »
    Photon harvesting was the intended meaning.

    Afaik you only need a sparks with all the right acronyms to sign off on the inverter. Upstream of that is grey.


    Thanks.

    Can you share anything about the Aurora Power One Inverter, please !?
    Found a tonne of material but very little of how does it work grid-on / grid-off, also how is switching/balancing between house AC loads and grid-tie supply.

    Found a very good deal on a ABB PVI-6000-TL-OUTD-S and I just don't wanna miss it. Just decided to pass the batteries for third stage of the project.

    Also, if you around Dublin these days, i can meet you for a chat and a consultation, if that suits you.

    Regards


  • #8
    [Deleted User]
    Posts: 5,238 ✭✭✭ [Deleted User]


    I just do battery systems me it's a lifestyle and a hobby. I'm not involved in the industry.

    Switching between house and grid is easy, higher voltage wins. GTI is higher than grid = export. GTI lower than grid = import.


  • #9
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Well,my project just died after few weeks of vey intensive and exciting research.
    After reading other post where with a system of 24 panels ROI is small and the other one with almost 2Kw panels getting just over 20W a day...numbers just doesnt match.
    My mind beat my heart,so i guess the focus now is on "how to" replace the kitchen furniture.

    Possible identified issues:

    Front of the house:
    -location for 8 panels,fitted in various positions cannot get the desired maxim output;
    -early mornings (EAST) it will be shaded by the chimney,late in the evening (WEST) shaded patially by the neighbour building.Shading of some panels versus some cells,panels linked serial - parallel ... KILLS output completely;
    -cannot "justify" legal regulations;
    -even if i can build mesh supporting the new tructure that will hold the panels,it will not be cost effective after Structural Engineer,aluminium frames and plastic wind deflectors installed...


    374078.jpg

    Back of the house / Garden:
    -there is place for 2 x 4 panels on a nice 3m pole tracker E-W but the winter months i get no sun exposure at all. Just few drop of lights "reflected" by the planes and birds.


    What options do i have !?

    1.ignore,make my wife happy in the kitchen,it may reflect in my life at some point,somewhere;
    2.build a smaller array that will cover front house roof and possible live with the back garden summer months only;
    3.upgrade the solar tubes from 40 to 60,ignore the PVs,save money on gas bill toward electricity bill
    4.become more electricity-aware with tools like these that may not save money but improve my consumer habits from here

    Thanks in advance...it may be my last post in Renewable Energy,trying to save the Planet that will survive, but all living creatures will disapear... :)


  • #10
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    I know it may sound crazy...

    Been certified viable from a mechanical point of view... do you reckon this PV tower with tracker will pass any Planning Permission process(s) if I will try to install in the font garden !?

    Thanks


    [URL="[url=https://flic.kr/p/CvJdXk][img]https://farm2.staticflickr.com/1453/23965260313_342448d4ba_b.jpg[/img][/url][url=https://flic.kr/p/CvJdXk]PV_Tower_v1[/url] by [url=https://www.flickr.com/photos/132185679@N07/][/url], on Flickr"][/url]23965260313_342448d4ba_b.jpgPV_Tower_v1, on Flickr


  • #11
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Hi,

    Just a quick update,proving that "green e_virus" is alive and kicking ...
    Just received delivery of nice lovely 7x LG320 and a ABB inverter.Nice feeling when i touch them.


    392583.jpg

    Planning to use the bad weather to shift the solar tubes at the higher position of the roof,freeing up the bottom section to accomdate my 7 panels.

    Lots of fun to come ...


  • Advertisement
  • #12
    SemperFidelis
    Registered Users, Registered Users 2 Posts: 266 ✭✭SemperFidelis


    Looks good, keep us posted on how you get on with installation.

    And if you don't mind please PM me where you bought the panels, looking to do a diy install myself at some stage.


  • #13
    freddyuk
    Registered Users, Registered Users 2 Posts: 1,111 ✭✭✭freddyuk


    Don't have your PV too close to the bottom edge as you can overshoot the gutter. You will be very tight for space looking at images.
    For the record there are other certified GT inverters with Irish certificate but the ABB are a good brand.
    If you go battery option I would not consider anything less then 2v cells as others have said however now I would use AHI batteries as these are now 48v or 24v. Why? Because they are 100% safe. No topping up or monitoring to worry about. No issue with adding new to older units or balancing. No "dead" cells which happens with traditional Forklift banks. You can use 100% of the capacity whereas with Lead Acid you need to have double the capacity so double the cost.
    The beauty is you can have a couple of stacks (5kwh) installed and rigged as grid tied thus being charged from as much PV as you can muster for free and then topped up if required from the grid overnight only using an off peak meter. This would run you overnight loads. Adding to the bank if you are happy can then be done later and run the whole house on free PV or cheap rate grid only for any balance.
    As said above buying expensive batteries without any experience is not a wise move as you will loose them early. However with AHI batteries you need no experience or maintenance skills once the system is installed as they require no servicing and no expertise from the user.


  • #14
    freddyuk
    Registered Users, Registered Users 2 Posts: 1,111 ✭✭✭freddyuk


    Don't have your PV too close to the bottom edge as you can overshoot the gutter. You will be very tight for space looking at images.
    For the record there are other certified GT inverters with Irish certificate but the ABB are a good brand.
    If you go battery option I would not consider anything less then 2v cells as others have said however now I would use AHI batteries as these are now 48v or 24v. Why? Because they are 100% safe. No topping up or monitoring to worry about. No issue with adding new to older units or balancing. No "dead" cells which happens with traditional Forklift banks. You can use 100% of the capacity whereas with Lead Acid you need to have double the capacity so double the cost.
    The beauty is you can have a couple of stacks (5kwh) installed and rigged as grid tied thus being charged from as much PV as you can muster for free and then topped up if required from the grid overnight only using an off peak meter. This would run you overnight loads. Adding to the bank if you are happy can then be done later and run the whole house on free PV or cheap rate grid only for any balance.
    As said above buying expensive batteries without any experience is not a wise move as you will loose them early. However with AHI batteries you need no experience or maintenance skills once the system is installed as they require no servicing and no expertise from the user.


  • #15
    [Deleted User]
    Posts: 5,238 ✭✭✭ [Deleted User]


    I have my doubts about AHI Freddy...and every other "game-changing", "maintenance-free" wet cell, "full discharge capable" new amaze-o-battery. How intimately do you know them?
    They do not claim to have immortal cells, what they claim is a dead cell will not leave your battery open circuit because the 48v strings are in parallel.
    It sounds too good to be true.

    Salespersons say reassuringly expensive AGMs are maintenance free too...this is because they recommend you retard your charger, they still die prematurely from either thirst or sulphation. FLA would be maintenance free too if you mollycoddled them like AGMs
    You can get double the capacity FLA OPzS for half the price of equivalent AHI. Forklift cells are even cheaper.

    No UL or ISTA benchmarks met yet. Rated to 70% capacity on claimed cycle life, not industry standard 80%.


  • #16
    freddyuk
    Registered Users, Registered Users 2 Posts: 1,111 ✭✭✭freddyuk


    I was cynical too as plenty of snake oil out there in the renewables industry. Under charging AGM's is going to lead to early failure but these are being sold for domestic power packs without regard for the maintenance which is critical for keeping these traditional batteries alive. Fork lift cells require a charging regime as the supplier will tell you and solar charging almost never gives a battery bank the correct amount of charge to fully recover from depletion thus they lose capacity via sulphation. They may be recovered by forced equalisation or a period of constant charge to reverse the chemistry but this can take a long time so they would be unusable for a period and 100% capacity would likely not be reached.
    I have two sites under monitoring and I am convinced the manufacturer is correct -"so far". The AHI batteries are being used on Off Grid sites; one is a business and the other domestic house. Both are solar charged with generator backup but the generator has not been used since the winter. They have been abused to some extent to check the resilience and have bounced back from deep discharges without a problem. We cannot tell if they will last 10+ years until time has passed so can only look at manufacturers tests and gauge if they are giving what they are supposed to. So far I am impressed and personally would be using these against FLA based on actual experience. The cost is high due to the Lithium market competition which is the benchmark for manufacturer so prices can and will fall. The actual components are cheap and easily available and there are no safety concerns unlike FLA and Lithium. I have had personal experience of a long dead sealed Lead Acid battery coming to life and emitting large quantities of Hydrogen gas which could have been a disaster in the home. It turned every bit of copper in the garage grey! So be warned....
    AHI have zero components that could be remotely dangerous?


  • #17
    [Deleted User]
    Posts: 5,238 ✭✭✭ [Deleted User]


    I get where you're coming from Freddy, I like getting my hands dirty and don't understand the one-size-fits-all-fire-and-forget-installation approach, to me it's compromising on performance. I'm happy to do the light handed maintenance on my battery sets for an overall improvement in health and performance. With that in mind I can flag these disasters in the home long before they happen. I have a hard time accepting this is not what Joe Public wants and he's more than happy to compromise on efficiency and longevity (especially if you don't tell him) for convenience.
    AGMs are FLA with finicky electrolyte. In my experience if you charge FLA at 2.467V p/c with temperature compensation until the specific gravity is 1.275 for domestic loads they rarely need EQ.
    Sealed lead acid batteries have no place in off grid if you ask me..seal and externally vent the compartment not the cells. It's no coincidence all these new fangled batteries compare themselves to gel and AGMs when they pick a match for LA.

    I don't find it a problem getting my FLA 107% charged once a week or 100% charged once a week and 107% charged once a month in the off season. My camper has enough downtime for solar to do the job and/or a hook-up for the depths of Winter & my house battery can use off-peak mains. For off grid a battery that does not deteriorate over time without full charge does become an asset but if it's more expensive than a wind turbine I'd go for the wind turbine.

    What manufacturer tests? The ones they haven't published?
    Lithium hasn't wrested the title from FLA in the static application field yet either although it has made it to No. 1 in the pop charts and electric motive.

    I agree about lithium ion being dangerous, LA is pretty stable when managed.

    How do you know when these AHI batteries are fully charged?
    Do they gas?
    What's the preferred charge algorithm?
    Have you data to display the internal resistance/efficiency? Does it match the manufacturer figures?
    What's the coloumbic efficiency?

    PS. ignore my cynicism, like you say there's too much snake oil in the industry...I'm always interested in batteries, but I'm a hard sell. :D

    PPS. I'll be pm'ing you in 6 years to see how they're holding up. :)


  • #18
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Hi,

    A quick dirty sad update:
    My living room has been for the past month / 4 weeks storage for the panels and other bits.

    Cannot find the person or company to fit the panels on the roof.
    Friends,they are all enjoying sunnier climate until the end of August
    Few of the supplier aka competition, quote prices as far as €2,000 to fit them,with my own parts.
    Other company that i have approached didnt even bothered replying back !

    So,i own a nice piece of PVs while i "argue and fight" with my wife... not good,not good at all.


  • #19
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Thanks to all that shared information !
    My inverter has "green light" !!!

    397308.jpg


  • #20
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Morning,

    And for those that will like to embark on a DIY journey...keep an eye on my system with live logging and history data/records for analysis and comparison ... HERE.

    Have fun !


  • #21
    Conor20
    Registered Users Posts: 265 ✭✭Conor20


    rolion wrote: »
    Thanks to all that shared information !
    My inverter has "green light" !!!
    I'm really happy to see this - congratulations! I will install a Solar PV array on our house in the next few weeks, though it will be less hands on than your project (e.g. I will have a company supply and install it). I will likely follow up with a DIY install on the shed roof space along the lines of what you've done though. Did you add batteries to the mix? It'd be great if you could do a write up on the source of your materials, the total costs and the performance over the first few months. It would give a really useful template for repeating a similar install.


  • Advertisement
  • #22
    eeguy
    Closed Accounts Posts: 3,478 ✭✭✭eeguy


    Congrats! Do you have a final build +installation cost for the entire system?


  • #23
    [Deleted User]
    Posts: 5,238 ✭✭✭ [Deleted User]


    Has the solar thermal taken much of a hit with the chimney shadow and the draft?


  • #24
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Hi,

    I'll reply to above questions soon.
    Now,as per this post here... my panels are disconnected as i'm paying for my own producton !!! :(

    Lessons to be learned...


    https://www.esbnetworks.ie/new-connections/generator-connections/connect-a-micro-generator

    397562.jpg


  • #25
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Sorry for double posting,just in case someone follows this thread,please NOTE the electricity meter needs to be "upgraded" a per topic HERE !

    Have fun !


  • #26
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Well... time to update the game!

    I'm installing an upgrade to the current system.
    Back garden, an array of eight LG 310 panels, stationary, with a DIY pole mount adjustable only on the God Sun angle but not east-west ,connected to same inverter.
    With around 4ish KW I should be able to run all my appliances except the cooker.

    I'll post more on the how's going next week.

    Have fun.


  • #27
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Well, FiT is nowhere to be seen at the horizons, but my back garden took delivery & installation of a new shinny 8 LGs panels just days ago.

    Supported by galvanised steels from HERE .
    LG panels 300w NIC-G4 latest generation, as HERE .
    All railings, fittings and friendly chat supplied from HERE .
    Powered by LG but ... (soon) smartly optimised by TIGO by same guys above.

    Just waiting for the piping to be completed so that I can connect the PV cables to main ABB inverter and... proudly enjoy it.



    412304.jpg

    412305.jpg


  • #28
    KCross
    Registered Users, Registered Users 2 Posts: 12,136 ✭✭✭✭KCross


    It looks quite high. Are there any planning implications for that?


  • #29
    randombar
    Registered Users, Registered Users 2 Posts: 3,412 ✭✭✭randombar


    Are your neighbours behind you not going nuts over robbing their sunlight?


  • #30
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    Dunno guys.
    Not higher than my neighbour trees... or my neighbour extension walls or .. . roof.
    Sun comes and goes.


    A big milestone.. iv'e generated today 600KwH ! I have made my €100 back ... and few more to go .

    412374.jpg


  • Advertisement
  • #31
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    And speeding with 27kwh towards my fist MEGAwatt produced and saved from the corporations ! :)

    414413.jpg


    PV to water diverter zooms away at a high rate and only yesterday it came-up with an error "Tank Hot" which means that i will not be bale to divert any more of the PVs to the water cylinder !

    414412.jpg

    Where is the FIT,when i produced 27 kw and i used only 10,giving free to my neighbour over 17 KW !??

    414411.jpg


  • #32
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    How much money did you have to give to the corporations to build this?

    Sadly electricity is only worth about €40 a MWh at the times you do most of your generation, so a slow way to make a fortune.

    Looks good still!


  • #33
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    antoinolachtnai wrote: »
    How much money did you have to give to the corporations to build this?

    Sadly electricity is only worth about €40 a MWh at the times you do most of your generation, so a slow way to make a fortune.

    Looks good still!

    Thanks.
    €40 per MWh VERSUS €200 per same MWh (.20c * 1kwh * 1,000) ;)


  • #34
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    Well, that includes losses, VAT, distribution, transmission and capacity charges!

    When you consume electricity at peak time (5-7) , you are really buying electricity that costs around 75 euros/MWh to produce and some days costs up to 220 euros/MWh to produce. When you take into account all the above 18 c/kWh including VAT is not that expensive.

    All I am saying is that you shouldn't expect any FIT to be more than 3c or 4c/kWh.


  • #35
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    antoinolachtnai wrote: »
    Well, that includes losses, VAT, distribution, transmission and capacity charges!

    When you consume electricity at peak time (5-7) , you are really buying electricity that costs around 75 euros/MWh to produce and some days costs up to 220 euros/MWh to produce. When you take into account all the above 18 c/kWh including VAT is not that expensive.

    All I am saying is that you shouldn't expect any FIT to be more than 3c or 4c/kWh.

    I could guess the costs behind,from production to fuse board !

    Re FIT,we will wait and see but my family already works around the day with awareness of the consumption,using larger appliances based on the production. Wherever before using iron,hoover and others appliances at random times,now we "ban" them once the Sun is lower in the sky.

    I guess anyone that gets involved in to renewables has missed the lesson with RoI and TCO ! :)
    I will never expect to have a real return on the investment done so far or next one but tomorrow's day looks brighter and cleaner knowing and feeling what i've done.

    Have fun !


  • #36
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    And..happy day today:reached 2MWh mark.

    A graphs showing the generation since day 1, past months and weeks.
    Hope that will assist someone deciding to invest in PVs.

    Still wonder how much went in to my home and how much my neighbour(s) enjoy it supplied "free" and paid to "third party" supplier..


    419299.jpg


    419301.jpg


    419300.jpg


    OWL dasboard,to be honest,is not so accurate despite having PV sensors.
    I guess becouse it seeing the IBoost as a consumption rather than a saver device.

    419302.jpg

    iBoost works fine ONLY if i have enough energy generated and in surplus.

    419303.jpg


  • Advertisement
  • #37
    air
    Registered Users, Registered Users 2 Posts: 2,830 ✭✭✭air


    antoinolachtnai wrote: »
    Well, that includes losses, VAT, distribution, transmission and capacity charges!

    When you consume electricity at peak time (5-7) , you are really buying electricity that costs around 75 euros/MWh to produce and some days costs up to 220 euros/MWh to produce. When you take into account all the above 18 c/kWh including VAT is not that expensive.

    All I am saying is that you shouldn't expect any FIT to be more than 3c or 4c/kWh.
    In a sane system, the energy supplier should be able to claim credits for distribution and transmission charges for micro generation as there is effectively no cost to the network for these in the redistribution of exported micro generation energy.
    Thus the FIT should be greater than the commercial energy market supply figures that you are quoting here. Also assuming that credit is applied as a credit off the import costs on each bill, the microgenerator gets a VAT benefit for the production also and effectively gets paid VAT for their export.

    Rolion, your production looks great and exceeds my own slightly smaller system by quite a bit i'd say. I've very little monitoring and my orientation isn't as good as yours though and I have some shading on my South facing array.
    Your consumption is high but I think you have an electric car?


  • #38
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    @air

    Do no get me started on the FIT,please.

    Numbers looks high as the OWL registers production AND diversion of the PVs via iBoost as consumption AND not saving/generation !
    Re consumption i do around 10 units daily.
    House has around 350wh in idle with no one inside.
    I have no plans to invest in a EV while college fees covers the free ducation.
    Also, a EV does not suits my working style, yet.

    Enjoy your PVs,happy harvesting...


  • #39
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    air wrote: »
    antoinolachtnai wrote: »
    Well, that includes losses, VAT, distribution, transmission and capacity charges!

    When you consume electricity at peak time (5-7) , you are really buying electricity that costs around 75 euros/MWh to produce and some days costs up to 220 euros/MWh to produce. When you take into account all the above 18 c/kWh including VAT is not that expensive.

    All I am saying is that you shouldn't expect any FIT to be more than 3c or 4c/kWh.
    In a sane system, the energy supplier should be able to claim credits for distribution and transmission charges for micro generation as there is effectively no cost to the network for these in the redistribution of exported micro generation energy.
    Thus the FIT should be greater than the commercial energy market supply figures that you are quoting here. Also assuming that credit is applied as a credit off the import costs on each bill, the microgenerator gets a VAT benefit for the production also and effectively gets paid VAT for their export.

    The arrangements do in fact allow suppliers to treat small-scale generation as you describe. But then you are selling to the supplier, not the market at large. If you sell it directly to the single electricity market, then you get the lower price. 
    Doing what you describe for VAT would be a real issue. There are also income tax issues if the tariff were high enough to actually make a profit. 
    Being paid market price is not the same as a tariff. A tariff is some sort of fixed, guaranteed price. 
    The market doesn't offer that. It offers an ever-changing price. And the market price will become even more volatile and unfavourable to home solar over time (basically because PV isn't guaranteed to be able to generate at any particular time and because there will be more and more PV available over interconnectors from other countries).


  • #40
    air
    Registered Users, Registered Users 2 Posts: 2,830 ✭✭✭air


    Thanks Antoin, that's a good reply.
    My use of terminology wasn't 100% correct, I think a fixed tarriff at the around the mean market price (during the hours of PV production) would be more practical to implement.
    I don't think it would be economical to apply real time pricing to the tiny amount of export by individual micro generators, certainly not with low cost export meters.
    On the VAT / income tax issue, I think this could be easily addressed by revenue in an effort to stimulate the market and greatly simplify administration.
    The sums involved for PV microgenerators under say 10kW would be absolutely negligible with comparison to the allowances on the rent a room scheme for example (€14k / annum completely tax free).

    I think it's important to cater for microgeneration and incentivise users to stay on the grid. With the falling costs of batteries and inverter systems, going off grid will become more and more attractive. If people leave the grid in large numbers it will only increase costs for everyone.


  • #41
    Gumbo
    Moderators, Society & Culture Moderators Posts: 39,782 Mod ✭✭✭✭Gumbo


    KCross wrote: »
    It looks quite high. Are there any planning implications for that?

    Definite planning issues there. The limit for the these structures is 2m high.
    Planning would be required or retention if anyone complains to the planning enforcement section of your local LA.


    Otherwise, great reading your posts OP.


  • Advertisement
  • #42
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    kceire wrote: »
    Definite planning issues there. The limit for the these structures is 2m high.
    Planning would be required or retention if anyone complains to the planning enforcement section of your local LA.


    Otherwise, great reading your posts OP.


    Trouble with the back garden panels are that mornings and evenings (based on sun angles) they could generate double the output as the front ones.
    In the winter,they will have no Sun cover at all,i will gladly "accept" few watts to cover my 350 hourly and the front,more better exposed to photons,to take the load.

    So,no matter how many or what type of panels i / you have,the position is very important.

    Not lastly,i am saving for a set of individual controlers, as per few posts above,that will deal with the shading when Sun is at a lower angles.

    My neighour build an extension behind the panels.I will follow with a picture later.

    Thanks.

    419425.JPG


  • #43
    Gumbo
    Moderators, Society & Culture Moderators Posts: 39,782 Mod ✭✭✭✭Gumbo


    That extension is a garden shed. It has different exemption limits, namely height differences. They can be 4m high with pitched roof or 3m high with flat roof.

    Either way, I can't see anybody complaining about them, as they would have done so by now. They look well blended in now with the plastic covering cover thing to the front.


  • #44
    rolion
    Closed Accounts Posts: 3,362 ✭✭✭rolion


    kceire wrote: »
    That extension is a garden shed. It has different exemption limits, namely height differences. They can be 4m high with pitched roof or 3m high with flat roof.

    Either way, I can't see anybody complaining about them, as they would have done so by now. They look well blended in now with the plastic covering cover thing to the front.
    Thanks ... well timed mutual benefit .

    But "the plastic covering cover thing to the front" , well i cannot take that offence ... :) ... that is my mindless green oasis !


  • #45
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    air wrote: »
    Thanks Antoin, that's a good reply.
    My use of terminology wasn't 100% correct, I think a fixed tarriff at the around the mean market price (during the hours of PV production) would be more practical to implement.
    I don't think it would be economical to apply real time pricing to the tiny amount of export by individual micro generators, certainly not with low cost export meters.
    On the VAT / income tax issue, I think this could be easily addressed by revenue in an effort to stimulate the market and greatly simplify administration.
    The sums involved for PV microgenerators under say 10kW would be absolutely negligible with comparison to the allowances on the rent a room scheme for example (€14k / annum completely tax free).

    I think it's important to cater for microgeneration and incentivise users to stay on the grid. With the falling costs of batteries and inverter systems, going off grid will become more and more attractive. If people leave the grid in large numbers it will only increase costs for everyone.
    Unless your garden is big enough for a wind turbine, we are decades away from being able to go off the grid in Ireland. There just isn't enough winter sun.
    The problem with paying the average is that we don't know in advance what the average will be over the next decade, though it is likely to be very low. It doesn't take much to calculate the payment based on the market price - it is just multiplication -. Home PV just isn't that economic yet in Ireland. It would be different if we had something to do with all the extra electricity that it generates when the sun shines.


  • #46
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    air wrote: »
    Thanks Antoin, that's a good reply.
    My use of terminology wasn't 100% correct, I think a fixed tarriff at the around the mean market price (during the hours of PV production) would be more practical to implement.
    I don't think it would be economical to apply real time pricing to the tiny amount of export by individual micro generators, certainly not with low cost export meters.
    On the VAT / income tax issue, I think this could be easily addressed by revenue in an effort to stimulate the market and greatly simplify administration.
    The sums involved for PV microgenerators under say 10kW would be absolutely negligible with comparison to the allowances on the rent a room scheme for example (€14k / annum completely tax free).

    I think it's important to cater for microgeneration and incentivise users to stay on the grid. With the falling costs of batteries and inverter systems, going off grid will become more and more attractive. If people leave the grid in large numbers it will only increase costs for everyone.
    Unless your garden is big enough for a wind turbine, we are decades away from being able to go off the grid in Ireland. There just isn't enough winter sun.
    The problem with paying the average is that we don't know in advance what the average will be over the next decade, though it is likely to be very low. It doesn't take much to calculate the payment based on the market price - it is just multiplication -. Home PV just isn't that economic yet in Ireland. It would be different if we had something to do with all the extra electricity that it generates when the sun shines.


  • #47
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    air wrote: »
    Thanks Antoin, that's a good reply.
    My use of terminology wasn't 100% correct, I think a fixed tarriff at the around the mean market price (during the hours of PV production) would be more practical to implement.
    I don't think it would be economical to apply real time pricing to the tiny amount of export by individual micro generators, certainly not with low cost export meters.
    On the VAT / income tax issue, I think this could be easily addressed by revenue in an effort to stimulate the market and greatly simplify administration.
    The sums involved for PV microgenerators under say 10kW would be absolutely negligible with comparison to the allowances on the rent a room scheme for example (€14k / annum completely tax free).

    I think it's important to cater for microgeneration and incentivise users to stay on the grid. With the falling costs of batteries and inverter systems, going off grid will become more and more attractive. If people leave the grid in large numbers it will only increase costs for everyone.
    Unless your garden is big enough for a wind turbine, we are decades away from being able to go off the grid in Ireland. There just isn't enough winter sun.
    The problem with paying the average is that we don't know in advance what the average will be over the next decade, though it is likely to be very low. It doesn't take much to calculate the payment based on the market price - it is just multiplication -. Home PV just isn't that economic yet in Ireland. It would be different if we had something to do with all the extra electricity that it generates when the sun shines.


  • #48
    air
    Registered Users, Registered Users 2 Posts: 2,830 ✭✭✭air


    On the contrary, going off grid is quite feasible already with a backup generator. I currently have what is a small enough 4kW system and it produces 3 times what I import from the grid every year. At 10kW of PV capacity I would need a generator very very rarely. The only thing putting me off disconnecting is the ridiculous 2k charge for reconnecting after 2 years or more and the wish to help the environment with my summer excess.

    With a smaller PV system a small natural gas CHP plant would be an ideal companion for the next decade or so at least.

    The issue with the market price would be the auditing of it, every micro-generation meter would need to log export at a fairly high sample rate instead of just summing kWh totals. An annually updated mean price surely wouldn't be that big of an issue.


  • #49
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    Logging electricity consumption and generation every 15 or 30 minutes is a pretty standard thing to do. It is straightforward and cheap enough.

    An annually updated mean price is a very big issue, especially if you want to know it at the beginning of the year. And on the other hand one year does not give much certainty.

    Can you really amortise and maintain your generator for 65 euros a year (which is the ESBN standing charge when you strip out the supplier charges)?

    How much does it cost to generate a kWh with your generator?

    Potterton make a small CHP boiler for homes. The electricity generation seeked very small and there didn't seem to be much economics in it, especially if you don't need that much heat. And arguably, you haven't really gone off-grid if you are still on the gas grid!


  • #50
    air
    Registered Users, Registered Users 2 Posts: 2,830 ✭✭✭air


    antoinolachtnai wrote: »
    Logging electricity consumption and generation every 15 or 30 minutes is a pretty standard thing to do. It is straightforward and cheap enough.
    I take your point however ESB charged €340 for the supply and install of a bog standard dumb import export meter on the original micro-generation scheme. This was nearly 10% of the cost of my system. This doesn't inspire confidence that they could or would deploy a more sophisticated version at an acceptable cost.

    antoinolachtnai wrote: »
    Can you really amortise and maintain your generator for 65 euros a year (which is the ESBN standing charge when you strip out the supplier charges)?
    Certainly can doing the work myself. I'd be saving about €220 a year including the PSO levy etc.
    antoinolachtnai wrote: »
    How much does it cost to generate a kWh with your generator?
    In fuel terms about 15c/kWh inc VAT but I would also get back 2 kWh of heat for every kWh of electricity in winter time if plumbed for CHP. So less than I currently pay for electricity from the grid. Obviously this doesn't include capital costs but the standing charges / PSO saving covers those within a few years.
    antoinolachtnai wrote: »
    Potterton make a small CHP boiler for homes. The electricity generation seeked very small and there didn't seem to be much economics in it, especially if you don't need that much heat.
    I'm familiar with it, very expensive due to being a niche low volume product using bespoke components and technology.
    antoinolachtnai wrote: »
    And arguably, you haven't really gone off-grid if you are still on the gas grid!
    I've no strong feelings about being on or off grid from any philosophical viewpoint. Just looking at the economics. As stated I'd prefer to stay on grid as it allows for better use of my summer energy excess.


  • #51
    antoinolachtnai
    Registered Users, Registered Users 2 Posts: 9,814 ✭✭✭antoinolachtnai


    15c/kWh is pretty good. The PSO is an interesting issue. Regular people would be forsaking a lot of convenience and reliability to save €220 a year. That's why I don't see it.

    The import/export meter ESB install records every 15 minutes. No matter what happens, the metering arrangements really matter for the future. Nothing will really work properly without proper metering if you ask me.


  • Advertisement
Advertisement