Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

self filler on a jarmet

  • 16-05-2015 04:47PM
    #1
    amacca
    Registered Users, Registered Users 2 Posts: 7,686 ✭✭✭


    Anyone here familiar with jarmet sprayers?

    Cant for the life of me figure out where to connect up the self fill attachment with it.

    if I connect it up one place the pump has no connection to it (unless pump vacuums tank and sucks water up from below - unlikely I think)

    if I connect the other place it will go....then the pipe from the bottom of the tank will be left unconnected and it will empty as quick as it fills

    it won't connect where the yellow twist seal is as its jammed right up under the tank


    Real head scratcher (for me anyway!!!!)


Comments

  • #2
    Limestone Cowboy
    Registered Users, Registered Users 2 Posts: 3,802 ✭✭✭Limestone Cowboy


    I never managed to get the one on mine working either! You get what you pay for I suppose!


  • #3
    amacca
    Registered Users, Registered Users 2 Posts: 7,686 ✭✭✭amacca


    Having said that, I'm happy with it so far for all I have to do.....figuring out how to connect the self fill excepted.


  • #4
    omu
    Registered Users, Registered Users 2 Posts: 123 ✭✭omu


    Hi all,

    I just recently bought a 400lt jarmet but have never used a sprayer before. Any top tips...also the hand lance - where do i connect this to?? Any help appreciated...

    Thanks


  • #5
    blue5000
    Moderators, Society & Culture Moderators Posts: 13,083 Mod ✭✭✭✭blue5000


    Seen one rigged up with a honda engine, so I guess self filling is a non-runner on them.

    If the seat's wet, sit on yer hat, a cool head is better than a wet ar5e.



  • #6
    50HX
    Registered Users, Registered Users 2, Paid Member Posts: 3,798 ✭✭✭50HX


    omu wrote: »
    Hi all,

    I just recently bought a 400lt jarmet but have never used a sprayer before. Any top tips...also the hand lance - where do i connect this to?? Any help appreciated...

    Thanks

    rinse anti freeze through it before storing for winter
    store elevated from the ground - eg on a pallet
    wash inside and outside well after each use

    spend some time before spraying working out what nozzle size suits you best and keep a a few spare nozzles to hand at all times

    never trying freeing a blocked nozzle with a needle - if it won't free with water or air replace it

    set sprayer so that the nozzles are 0.5mtrs from the top of what you want to spray - with the pto shaft fairly straight as well - there will be an adjustment at the back

    at the section control on the front where you can turn off each section there should be a blank fitted on one of them

    you prob have 4 sections on your sprayer


  • Advertisement
Advertisement
Advertisement