3 outdoor lights from one cable

Sonic the Shaghog

So I've a outdoor light I need replacing and there's the one original cable coming out to it.

I'd like to add 2 more light fixtures by running the cable under the facia board. The original in the middle and one to the right and another off to the left.

I was looking at a junction box but the only one I see only gives 3 connections so I'd have the doner cable and then only 2 other connections for 2 lights.

What sorta setup would I want to do to bring connections to 3 fixtures?

This is the box

https://www.screwfix.ie/p/wago-abox-221-ip65-32a-5-terminal-weatherproof-outdoor-junction-box-110mm-x-110mm-x-67mm/9390g

con747

https://www.boards.ie/discussion/2058370201/3-outdoor-lights-from-one-cable

I used similar to these in the past.

https://www.amazon.co.uk/Waterproof-Junction-Electrical-Connector-Terminal/dp/B088WH687N

10-10-20

Your local electrical wholesaler will have similar boxes with glands:

https://www.eurosales.ie/products/2000024.html?filter_set%5B%5D=4776,4777,4794&page=6

https://www.eurosales.ie/products/combi-308-5-s-grey-wiska-box-85x85x51mm-ip66-wiskabox.html?filter_set%5B%5D=4776,4777,4794&page=7

https://www.eurosales.ie/products/nylon-gland-20mm-c-w-locknut-cglnm20g.html?filter_set%5B%5D=4776,4777,4794&page=4

Cerco

Make sure your replacement cable is sized for the new load.