BER assessment some years ago, C3 following wall/attic insulation. Since then we've put in new oil burner (condenser). We've zoned the heating system. Replaced all the windows to triple glaze. Changed back door from a sliding door to a single composite door. Roughly, can anyone guide me into what impact this would've had on on the BER.

maybe might get you to C1 you will need to retain the window and doors test certificates AND a letter of supply from teh suppliers saying that they installed this exact windows / doors into your build. Make sure the heating system is fully zoned ie that at least two space zones and the hot water cylinder can be programmed for time and temperature for at least 7 days in advance. If you cant do that, its not a full control system.

Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Ber improvements

09-01-2023 03:17PM

#1

lenan

Registered Users, Registered Users 2 Posts: 76 ✭✭

Join Date: July 2010

Posts: 65

BER assessment some years ago, C3 following wall/attic insulation.
Since then we've put in new oil burner (condenser).
We've zoned the heating system.
Replaced all the windows to triple glaze.
Changed back door from a sliding door to a single composite door.
Roughly, can anyone guide me into what impact this would've had on on the BER.

0

Best Answer

#1 10-01-2023 01:37PM

sydthebeat

Subscribers, Paid Member Posts: 43,789 ✭✭✭✭

Join Date: November 2007

Posts: 42591

https://www.boards.ie/discussion/2058278862/ber-improvements

maybe might get you to C1
you will need to retain the window and doors test certificates AND a letter of supply from teh suppliers saying that they installed this exact windows / doors into your build.
Make sure the heating system is fully zoned ie that at least two space zones and the hot water cylinder can be programmed for time and temperature for at least 7 days in advance. If you cant do that, its not a full control system.

1