Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Whirlpool Dish washer ADG7470/2

  • 05-04-2022 7:44am
    #1
    Registered Users, Registered Users 2 Posts: 3,623 ✭✭✭


    Above was gradually taking longer and to pump out (6 years old) so I removed the drain hose from the pump and found it "full" of wash powder residue etc, cleaned it out but the rubber non return valve came out with all the crap, I reassembled it without the NRV and all is well, this goes to a stand pipe. I intend to replace the NRV but a bit puzzled as to what actually keeps it in place.

    It looks like the side with the raised inner diameter sits in the pump discharge fitting with the NRV tang pointing towards the drain hose, what keeps the NRV located as others I have seen fit over a little plastic tab that keeps them in place?.





Comments

  • Registered Users, Registered Users 2 Posts: 1,382 ✭✭✭The Red Ace


    Don’t worry about it when it is plumbed to a standpipe, it stops residue if plumbed to a spigot on a sink



Advertisement