Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

2014 Ford Ranger DPF issue

  • 30-10-2021 9:19pm
    #1
    sullzz
    Registered Users, Registered Users 2 Posts: 2,409 ✭✭✭


    IMG_20211030_181628.jpg

    Hi All,

    So I recently had my ranger go into limp mode and when I read the codes via my OBD ELM 327 I get the attached codes.

    I removed my DPF and brought it to a local Dpf cleaning centre and it came back as good as new.

    I also replaced the exhaust sensor in the Dpf centre.

    I removed the vaporiser and found it to be blocked, I cleared this and refitted it.

    When I clear the codes with the OBD, it immediately goes back to limp mode and the same codes appear.

    With accelerator fully pressed I'm not getting over 2500 rpm.

    I can't force a regen as I don't have the elm lead for my laptop, I have it being delivered and I'll download forscan then.

    Would anyone have any idea as to what the problem could still be ?

    Does it need a regen before the codes completely clear?

    I'm worried about putting it into a regen if there is some blockage still present which could cause a fire risk.

    Thanks in advance.



Comments

Advertisement