Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Tinyhawk S help....

skapegoat · 2021-01-14 21:00:04

I recently bought an Emax Tinyhawk S. After a few flights it developed a problem. It arms but does not spin the props and the throttle won't work. All the other controls work, the props spin for pitch yaw and roll but its obviously very little use when its lying on the ground with no flight happening. I have plugged it…

14-01-2021 09:00PM

#1

skapegoat

Registered Users, Registered Users 2 Posts: 328 ✭✭

Join Date: July 2008

Posts: 282

I recently bought an Emax Tinyhawk S.

After a few flights it developed a problem.

It arms but does not spin the props and the throttle won't work.
All the other controls work, the props spin for pitch yaw and roll but its obviously very little use when its lying on the ground with no flight happening.

I have plugged it into beta flight.
All the props spin individually at the same rate and via betaflight I can get all props to spin simultaneously via the master throttle in betaflight.

The controller shows the throttle signal in betaflight to be operating.

So in summary the drone Arms (goggles state it arms), but props won't spin.
All props can spin in beta flight.
Throttle signal working from controller (beatafpv)

The drone just doesn't get off the ground....it did before but its had a few crashes.

Any ideas?

I reset the software back to original just incase it was a software issue after a knock but no joy.
Thats as far as my expertise go....

Thanks....The Goat.

0