HKC Security System Part Set

Deltarom

Hi,

I have 4 PIR sensors, 1 Contact Sensor. Would like to part these into 2. How can we do that? Also how can we arm only one part.

Is there any video guide that go through all the keypad menus and usage? As an end user they give only the menu diagram, most of the option is hard to understand because there is no description.

Thanks

KoolKid

I am not sure what you mean part them into 2?

What do you want the system to do for you?

Deltarom

KoolKid wrote: »

I am not sure what you mean part them into 2?

What do you want the system to do for you?

I want to set alarm only in some portion (Part Set) when I'm in home. ie I have 4 PIR and 1 Contact sensor. I want to activate Contact Sensor and 2 PIR when I'm in home. Thanks

Deltarom

Anyone know

mugsymugsy

I part set my alarm via the app. Don't actually know what the keypad combo for a part set. Just do a full set via key pad when leaving house

Deltarom

mugsymugsy wrote: »

I part set my alarm via the app. Don't actually know what the keypad combo for a part set. Just do a full set via key pad when leaving house

I know the combo using keyboard. But how to part the sensors.

KoolKid

In engineer Menu apply attribute PGB or PGB to zone you want excluded in Part Guard A or Part Guard B.

0#7 To Part Guard A

0#8 To Part Guard B

Deltarom

KoolKid wrote: »

In engineer Menu apply attribute PGB or PGB to zone you want excluded in Part Guard A or Part Guard B.

0#7 To Part Guard A

0#8 To Part Guard B

Ok, What I understand is
In Engineer Menu -> Zone Option ->
Each Zone I can see following options
Engineer Menu -> Zone Option ->
->Inhibit Y
->Excl PSA N
->Excl PSB N
->Soak N
->Chime Y
->Rem Test Y

Is the Excl PSA, Excl PSB option that you are talking?

If so if I want to exclude a Zone from Part A I just have to enable Excl PSA Y in that zone isnt it? What about rest of the options in the list keep it as it is or do I need to change?

Thanks.

KoolKid

Its PGA & PGB . They should be set to YES to exclude that zone in the relevant part set.

Deltarom

KoolKid wrote: »

Its PGA & PGB . They should be set to YES to exclude that zone in the relevant part set.

https://ibb.co/dxChSA

https://ibb.co/k47Suq

https://ibb.co/gjUFEq

I tried to locate PGA & PGB but couldnt able to. Do you know under which option that located.

Thanks.

altor

Deltarom wrote: »

https://ibb.co/dxChSA

https://ibb.co/k47Suq

https://ibb.co/gjUFEq

I tried to locate PGA & PGB but couldnt able to. Do you know under which option that located.

Thanks.

This is located in the options menu in zones

KoolKid

Deltarom wrote: »

https://ibb.co/dxChSA

https://ibb.co/k47Suq

https://ibb.co/gjUFEq

I tried to locate PGA & PGB but couldnt able to. Do you know under which option that located.

Thanks.

Where are you trying to locate it.
Sorry can't open the links here.

Deltarom

Sorry for late reply I was away for a month.

altor wrote: »

This is located in the options menu in zones

In Engineer Menu -> Zone Option ->
Each Zone I can see following options
Engineer Menu -> Zone Option ->
->Inhibit Y
->Excl PSA N
->Excl PSB N
->Soak N
->Chime Y
->Rem Test Y

KoolKid wrote: »

Where are you trying to locate it.
Sorry can't open the links here.

In Engineer Menu -> Zone Option ->
Each Zone I can see following options
Engineer Menu -> Zone Option ->
->Inhibit Y
->Excl PSA N
->Excl PSB N
->Soak N
->Chime Y
->Rem Test Y

https://ibb.co/gjUFEq

altor

When you go into the zone options scroll and when you see Excl PSA N
Excl PSB N, these are the part set options. If you press yes a Y will replace the N meaning in part set this zone is excluded from part set A-B.

Deltarom

altor wrote: »

When you go into the zone options scroll and when you see Excl PSA N
Excl PSB N, these are the part set options. If you press yes a Y will replace the N meaning in part set this zone is excluded from part set A-B.

Thank you.

Zone 1 Excl PSA N
Zone 2 Excl PSA Y
Zone 3 Excl PSA N
Zone 4 Excl PSA Y
Zone 5 Excl PSA N

If this is the case and if we set PART SET A then only Zone 1, Zone 3, and Zone 5 are active. Zone 2 and 4 will not active, so that I can walk around these zones without triggering the alarm. am i right?

What is the method to PART SET A or PART SET B

altor

Deltarom wrote: »

Thank you.

Zone 1 Excl PSA N
Zone 2 Excl PSA Y
Zone 3 Excl PSA N
Zone 4 Excl PSA Y
Zone 5 Excl PSA N

If this is the case and if we set PART SET A then only Zone 1, Zone 3, and Zone 5 are active. Zone 2 and 4 will not active, so that I can walk around these zones without triggering the alarm. am i right?

What is the method to PART SET A or PART SET B

There is 2 part sets which are activated by 0#7 PSA, 0#8 PSB.
If you select the zones you want off and set up these for either part set then yes they are off once part set is set on the alarm.

Deltarom

While doing part set, why the Alarm light in the keypad is on? is it normal?

altor

Deltarom wrote: »

While doing part set, why the Alarm light in the keypad is on? is it normal?

Yes its a displayed arm light, can also be turned off.

Deltarom

altor wrote: »

Yes its a displayed arm light, can also be turned off.

How? Also part set is instant set not like full set. Full set usually give 30 sec time to set and unset alarm.

altor

Deltarom wrote: »

How? Also part set is instant set not like full set. Full set usually give 30 sec time to set and unset alarm.

In engineer mode.
Both have the option to turn it off.
Disply arm yes or no.
Display armed in partset yes or no.

Irish Gunner

ok old post I know

Got Hkc En 50131-3 and I know how to part guard at night time and also do full set

However all windows armed upstairs. On a sunny day like today how can we part guard it but leave a fly window open if only out for a few hours

altor

https://www.boards.ie/discussion/comment/119316635#Comment_119316635

In part set you can press 0#7, code, * zone number yes.

If 2 zones needed bypassed, 0#7, code, * zone number * zone number yes.

Please be aware that anything on the zone will be omitted once this bypass is set.

Once you disarm the alarm then the zones will automatically be back into the system.

Irish Gunner

https://www.boards.ie/discussion/comment/119318930#Comment_119318930

Ok how do I find out what is what zone? So if i leave bathroom open set full alarm it will tell me open zone i.e Zone 2

so in this case i would press 0#7 code a and then it asks for zone number and press 2?

altor

https://www.boards.ie/discussion/comment/119320699#Comment_119320699

If you don't have a zone list then the user walk test.

0#3 on your keypad.

Activate sensor and it will show the zone on the keypad.

If zone 2.

0#7, code, *, 2, yes

Irish Gunner

https://www.boards.ie/discussion/comment/119320826#Comment_119320826

Ok part set the Alarm and left windows upstairs open

Left one window open in rooms and checked what zone it was and all of upstairs is one Zone no separate Zone for each room (3 bedrooms and one bathroom)

So is there a way of separating each room into separate zone's. So if I want to leave bedroom window open I don't want to disarm the whole of upstairs

altor

https://www.boards.ie/discussion/comment/119336953#Comment_119336953

You would need to break them down into separate zones to do this

Irish Gunner

https://www.boards.ie/discussion/comment/119356466#Comment_119356466

Ok is that a Job for the sparks and not an easy task

altor

https://www.boards.ie/discussion/comment/119357404#Comment_119357404

Job for an alarm installer unless you are doing it yourself.

It depends on the cable in place and also if you would have space on the control panel to accommodate the extra zones

Irish Gunner

https://www.boards.ie/discussion/comment/119358015#Comment_119358015

Nah not going to DIY it just was looking at option

At the moment its ok and working fine just thought i would ask the question so I know my options

Cheers for the responses

altor

https://www.boards.ie/discussion/comment/119358033#Comment_119358033

No problem at all, always happy to help

newhouse87

Just got hkc alarm installed, am i best to just full alarm when going to bed at night, in part set the hallway sensor is off so seems pointless as if somebody did get in, you would want that alarm before person gets to bedrooms no?

Aquos76

https://www.boards.ie/discussion/comment/119903708#Comment_119903708

how do you plan on deactivating the alarm then in the morning then without setting off the full alarm?

altor

https://www.boards.ie/discussion/comment/119903708#Comment_119903708

If your planning on turning on the pir then you could set it up for entry/exit so if someone did gain access it goes into an entry and starts to make keypad beep before a entry alarm. Other than that a keypad in your room, keyfob or use the app for full set.

newhouse87

Presume i can set it someway on part set a or b to have hallway sensor go off if somebody is walking down the hall. Is hallway sensor only meant to be on when we leave house?

altor

https://www.boards.ie/discussion/comment/119921886#Comment_119921886

Yes, in most cases the PIRs are only on when someone is not in the house or if they are not on the keypad route when turning alarm off.

Irish Gunner

Getting new Broadband and WiFi pw etc will change

How do I update it on the keyboard

Thanks

Irish Gunner

https://www.boards.ie/discussion/comment/120897022#Comment_120897022

Got it working

Irish Gunner

https://www.boards.ie/discussion/comment/119318930#Comment_119318930

Having trouble with inhibiting zone

So do the above so zone upstairs inhibited. But as soon as I open the front door,different zone, alarm is triggered.

How to get around this?