Clipex Fence

jmrc

All, looking to fence around the house and garden, in sheep country and i'm not really a fan of post and rail, so was wondering what people think of the clipex fence system, was going to use sheep wire with two strands of plain wire on top??
I have about 200mtr or so to do and about 6 corner posts and a gate?

what would you recommend?

thanks in advance

adam14

jmrc wrote: »

All, looking to fence around the house and garden, in sheep country and i'm not really a fan of post and rail, so was wondering what people think of the clipex fence system, was going to use sheep wire with two strands of plain wire on top??
I have about 200mtr or so to do and about 6 corner posts and a gate?

what would you recommend?


thanks in advance

I have clipex here and highly recommend it. Job for life.

Buford T. Justice XIX

There's a thread in the Sheep forum on this as well, but it's deals mainly with the sheep clipex fencing.

https://www.boards.ie/vbulletin/showthread.php?p=102387963

Muckit

Seen at tullamorr show and very impressed. Will be using here for the next bit of fencing.

Neddyusa

jmrc wrote: »

All, looking to fence around the house and garden, in sheep country and i'm not really a fan of post and rail, so was wondering what people think of the clipex fence system, was going to use sheep wire with two strands of plain wire on top??
I have about 200mtr or so to do and about 6 corner posts and a gate?

what would you recommend?

thanks in advance

Personally I don't like the look of it.
Very harsh/industrial looking, so I wouldn't like it around house/garden.

No doubt it is a solid and permanent fence - but the galvinized steel doesn't blend in well with the landscape
....but maybe you could paint it!!

adam14

Neddyusa wrote: »

Personally I don't like the look of it.
Very harsh/industrial looking, so I wouldn't like it around house/garden.

No doubt it is a solid and permanent fence - but the galvinized steel doesn't blend in well with the landscape
....but maybe you could paint it!!

You can't see it unless very close up. It blends in quite well as you don't see the posts. Posts are very narrow and far from industrial looking.

jmrc

Thanks all. think i'll go with it.

C0N0R

How much are the posts in comparison to timber? What's the story with strainers?

49801

Another option my brother put around his house is the Gallagher eco post. 4 Strand of Electric wire threaded through. Looks well and does not create much of a visual barrier but is effective.

To install we did concrete them in... used Quick setting actually.

Only down side to them is they dont like a curve and will bend with a tensioned wire.

https://www.gallagher.eu/en_nl/electric-fencing/posts/eco-post-1-50m-pack-of-4

Muckit

C0N0R wrote: »

How much are the posts in comparison to timber? What's the story with strainers?

I can't remember prices l was quoted off hand, but l do remember thinking they were much of a muchness to timber post prices. They are the way to go. They do have strainers and struts.

susign

The'yre around same price as good creosote steaks but its a personal choice as to which is best. I prefer the clipex, they give a 30 yr guarantee but im not wishing my life away to see if they last that or longer.

I've bought hundreds of them over the past year and buying more this week. So easy put them up and transport, can buy 200 clipex on 1 pallet and no need to buy a tractor driven post driver.

I find that making a small pilot hole with a crowbar before driving them with the hand pounder helps keep them streight and looking better. Get the proper clipex pounder or protective sleeve from your supplier (if driving with a sledge). Otherwise you'll damage the post and top strand of wire wont clip in

I put concrete around ordinary steel tube for the end posts and on turns to make sure the wire stays standing for decades. Clipex end-posts are nice and galvanised but outside my budget as i have the whole farm that needs new fencing. If only doing a small job you would be best use the standard clipex end posts as it avoids need to weld support struts and painting them.

Good luck with it.

gooner99

Hi.

OP did you go the clippex route?

Does anyone have any pictures of their finished clippex fencing project?

foxirl

gooner99 wrote: »

Hi.

OP did you go the clippex route?

Does anyone have any pictures of their finished clippex fencing project?

One I put up last September.

gooner99

foxirl wrote: »

One I put up last September.

Cheers. Not sure if you meant to add a picture.

K.G.

Used it on a site that was beside land we bought lately.used concrete posts for the ends but clipex on the run as the ground was light and would have meant breaking holes for concrete posts wth a breaker.real fast to put up and doing its job so far

Muckit

How did u drive them?

foxirl

foxirl wrote: »

One I put up last September.

Sorry, pic didn't upload.

K.G.

Muckit wrote: »

How did u drive them?

Hand post driver ,small bit damage to the top

Green farmer

Looks like a fine job, Fox, how many meter intervals do you drive the posts ?

foxirl

Green farmer wrote: »

Looks like a fine job, Fox, how many meter intervals do you drive the posts ?

Think it was about 4.5m. Drove a bigger post every 5th or 6th post. The lighter posts were driven using the drive sleeve. Basically a cylinder pipe with a cap on it. Very easy to drive but works up a sweat. The bigger posts "beefy posts" were driven with a sledge but had a cap on the post so didn't damage them. Still need to add a row of barbed wire on top.

jmrc

looks good. still havent fenced mine yet....

Aravo

Are many using the clipex fencing. If I'm tams approved for sheep fencing timber posts can I change to clipex. Also can you use clipex on gentle bends or is it best to use the clipex on straight runs only.

Box09

You can go with whichever product you like for fencing. However the clipex will cost more than the max grant rate. I have it on straight runs only and it is fantastic. I would imagine small bends would work.

charolais0153

Aravo wrote: »

Are many using the clipex fencing. If I'm tams approved for sheep fencing timber posts can I change to clipex. Also can you use clipex on gentle bends or is it best to use the clipex on straight runs only.

A lad said that its the same price as normal stakes at the start but that when its put up they charge vat etc which makes it dear. Think he had people putting it up for him

Bullocks

charolais0153 wrote: »

A lad said that its the same price as normal stakes at the start but that when its put up they charge vat etc which makes it dear. Think he had people putting it up for him

I'm pretty sure you can claim the vat back on fencing.

Aravo

Bullocks wrote:

I'm pretty sure you can claim the vat back on fencing.

Yes you can.

Would the clipex be ok for both good and softish ground or should it be for good ground only.

charolais0153

Bullocks wrote: »

I'm pretty sure you can claim the vat back on fencing.

He thought he was getting vat back on the 5000 he paid whereas the 5000 was +vat

Bullocks

charolais0153 wrote: »

He thought he was getting vat back on the 5000 he paid whereas the 5000 was +vat

I would always ask is it plus VAT or inclusive especially on a big amount of money like that

Aravo

Bullocks wrote:

I would always ask is it plus VAT or inclusive especially on a big amount of money like that

Yes you have to ask. I know a lad who got timber quotes for a large new house of 2 local hardware stores. One was written and the other matched verbally. So both were roughly the same price so he went with the verbal one and the other store had supplied a lot up to that date so it was spreading the love or so he thought. All was ok until the invoice arrived. It was the quote plus VAT.

gooner99

Anyone go with clipex around their house yet.?

paddy 83

I never post reviews but i have made an exception for this company. I'll start off with why you should absolutely not use this product and move on to my own experience. The first major problem is the clip that takes the insulator has China written all over it. When you drive the post with the post driver Clipex provides you it will bend the clip to where you cannot then insert the insulator. It has a shabby piece of metal on a tiny little spring (useless). I only drove 20 or so in my field and to my horror the next morning the field was lit up like a christmas tree. The sunshine reflects off the galvanise and this doesn't go away. A year on there still shining in the field totally unnatural and blinding. Thank god I didn’t drive the 300 of them I’d have to get sunglasses for my cows. This must also be due to the cheap galvanizing when produced in China. In the field where I drove these posts it's not level. So if you could imagine when I strained the wire from the starting post the clipex posts driven in a dip will eventually come straight up as it has not enough substance to grab. The only thing going for these posts is their fast to drive. If your stupid enough like me and need a big quantaty of fencing posts just order one. From a first glance you’ll throw it in the bin.
My Story
I ordered 300 of these posts and insulators from Clipex Ireland. They arrived in a timely fashion and this was the first and only thing constructive I can say for Clipex. I was in a hurry trying to prepare a field as cattle needed moving so I went straight to work. The very first post I drove it bent the clip at the top which rendered the post useless as now it could not take the plastic insulator. Thinking it was an unlucky first I drove the next and the same result. I rang the company and the lady said she would send the owner of the company to the farm to inspect. I had to drive 20 odd more posts to get the field wired up but had to put the insulators in the second insert middle ways down the post as every post I drove the top bent. Three days later the owner from Co Clare landed at my property.
This is when things went downhill fast My god I’ll never forget him. The first thing you must experience is his appalling language on top of a very low IQ. After a few F this and F thats he then produced a petrol impact driver and started banging these posts into the garden of my house. One after another bending the top of each post as he went. Seven posts later he finally turned off the post driver gave a few more F this’s and just left. As it turned out all the products in their warehouse were like this and it was going to take months to have the product redesigned and shipped to ireland. I needed posts in a hurry. I saw these as seconds and offered to take another batch and no need for a refund. I figured I might be able to bend back the clip after driving and maybe able to then install the insulator. This is when I was told to get Fu@#ed by the owner over the phone. I told the lady in reception to have a currier come around and pick up their posts and demanded a full refund. A few days later while working in the farm shed I heard all this banging. To my horror the owner and another man were loading up my posts. I was parked at the back of the farm and he was under the impression nobody was at home. I watched from my kitchen window as the two loaded their trailer as fast as they could. I rang the guards and luckily they just showed up as they were driving out the gate. They put back the posts a left. Due to coronavirus the guards were too busy to do a proper investigation and described it as a civil matter. To make a long story short after many months of emails from different departments in Europe I had to negotiate with the owner from Australia. This guy though the head man in Ireland was ledgent and defended him and his product. I finally got my money back twenty days short of a year. I couldn't post this till I was reimbursed and delighted to do so today. Hopefully I can prevent others enduring the same nightmare I had. Stay away from this product and stay away from this company.