Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Recommendations please - Automated Gates, Intercom system?

  • 02-01-2017 10:08PM
    #1
    r3nu4l
    Registered Users, Registered Users 2 Posts: 17,392 ✭✭✭✭


    I need some help deciding on a new automated gate Intercom currently have something very similar to this model, the only difference being that the intercom on my system has a facility to be battery or mains operated and mine is wired to the mains.

    response-electronics-wireless-dect-telephone-and-door-intercom-combination.jpg?w=283&h=283&r=4&o=K33ffaXNfvSRdsa6YuHbsiMzbLQj&V=a8xx

    My intercom unit is shot but the handset is working fine. To be honest, we don't like the handset either so I need a completely new system.

    Can anyone recommend a decent system that also has a function that allows me to open the gate using the handset?
    Also, if possible, a handset that allows me to open the gate whether someone has rang, or not.

    Thanks in advance.

    EDIT: My gate currently uses a Blueberry system on the board, to open the gate...


Comments

  • #2
    kub
    Registered Users, Registered Users 2 Posts: 6,581 ✭✭✭kub


    Hi OP, for wireless Intercoms look no further than this company, when wired we use Comelit when wireless it is AES NI all the way.

    http://www.aesdistribution.co.uk/about.htm

    AES Kinsale Road, Cork are distributors 021 4964777.

    They are not the same company by the way.


  • #3
    rodge123
    Registered Users, Registered Users 2 Posts: 1,494 ✭✭✭rodge123


    Hi All,

    Apologies for hijacking the thread.

    Need to make a decision on intercom system soon, have everything else figured out for automated gates.

    Like the look and idea of this:
    http://pro.comelitgroup.com/us/product/8248/961/8451V-QUADRA-KIT-AND-WIFI-MINI-HF-SBTOP

    I only have cat5e cable at wall point in kitchen where I want the receiver monitor to go.
    It feeds back to a central Netgear switch.
    Will this be ok to power the receiver monitor via POE?

    I can also bring a cat cable from gates to the central Netgear switch.

    Does anyone see any issue with this setup?


Advertisement