Tan UAR (Urban Assault Rifle)

DeBurca

For Sale Tan Urban Assault Rifle €130

Its features ambidextrous fire selectors it also has ambidextrous mag releases above the trigger + a 3rd mag release just forward of the mag like the AUG
The bolt release can also be moved to both sides and locks in the rear position to make hop-up adjustments easier and is released by a button on the top of the body above the butt pad
Comes with 3 80rnd mid-cap mags with have a pop-off impact/dust cover for storage which can be snapped onto the floorplate when in the gun, it can also takes standard M4 mags

The V3 gearbox has a Quick change spring facility
The gearbox has been shimmed, re-greased and has an Aluminium air-nozzle and is fitted with a Bearing spring guide
It is wired to a Deans connector and is wired with Low-resistance silver wiring a Deans to Tamiya adapter can be supplied if required
I am also including a 7.4 volt Lipo with the UAR

The barrel has be replaced with a 500mm long 6.03 tight bore barrel and has a G&G green hop-up rubber fitted
The longer barrel is covered by a PDW type outer barrel and has a Scar flashider
A Vertical Fore Grip is also included

Shooting 319-322fps with 0.2g BB

DeBurca

Bump @ €130

DeBurca

Bump

DeBurca

Can also come with a silencer (has Navy Seals trades) to cover the 500mm long 6.03 Tight Bore barrel + an Off-Set flashlight mount
Also has a set of individual LaRue rail cover/protectors that can be configured to any length

DeBurca

€130

AirsoftGuy74

DeBurca wrote: »

€130

Would you take 100 for it collected?

DeBurca

AirsoftGuy74 wrote: »

Would you take 100 for it collected?

Many thanks for the offer but its too low

AirsoftGuy74

DeBurca wrote: »

Many thanks for the offer but its too low

Could you come down any bit

DeBurca

AirsoftGuy74 wrote: »

Could you come down any bit

Make me a good offer

AirsoftGuy74

DeBurca wrote: »

Make me a good offer

Where abouts in Clare are you and would you take 115

DeBurca

AirsoftGuy74 wrote: »

Where abouts in Clare are you and would you take 115

I live just over the Limerick/Clare border just 10 minutes from Limerick City and where are you. ??????????????

AirsoftGuy74

DeBurca wrote: »

I live just over the Limerick/Clare border just 10 minutes from Limerick City and where are you. ??????????????

I'm at the limerick/Tipperary border about 20 mins from Tipperary town

DeBurca

AirsoftGuy74 wrote: »

I'm at the limerick/Tipperary border about 20 mins from Tipperary town

If we do a deal would somewhere around OOLA suit you ??????????????

AirsoftGuy74

DeBurca wrote: »

If we do a deal would somewhere around OOLA suit you ??????????????

Oola would be perfect, so to PM's?

DeBurca

AirsoftGuy74 wrote: »

Oola would be perfect, so to PM's?

We need to agree a deal first I will do the UAR for €120 meetup in OOLA

AirsoftGuy74

DeBurca wrote: »

We need to agree a deal first I will do the UAR for €120 meetup in OOLA

Yeah I can do 120

DeBurca

AirsoftGuy74 wrote: »

Yeah I can do 120

Grand so just to confirm and stay within the Rules is that an offer of €120. ??????????????

AirsoftGuy74

DeBurca wrote: »

Grand so just to confirm and stay within the Rules is that an offer of €120. ??????????????

Yeah 120 offered

DeBurca

AirsoftGuy74 wrote: »

Yeah 120 offered

Deal @ €120

Drachnien

If the deal doesn't go ahead I'll offer the €120 for it.

DeBurca

Drachnien wrote: »

If the deal doesn't go ahead I'll offer the €120 for it.

The deal fell through due to a problem with the Mid-cap magazines which are not reliable in feeding properly
So if you want the UAR it is still available

Drachnien

Are you likely to be over Dublin direction any time soon?

DeBurca

Drachnien wrote: »

Are you likely to be over Dublin direction any time soon?

Sorry no plans to be there in the near future, but there is always post

Drachnien

can you check how much posting it would be? I'm not gonna get a chance to head over your neck of the woods for a few weeks I think .

DeBurca

Drachnien wrote: »

can you check how much posting it would be? I'm not gonna get a chance to head over your neck of the woods for a few weeks I think .

The last AEG I sent with a Track & Trace number cost €14 but call it a tenner as I am in a good mood

Drachnien

cool offer €120 plus postage then

DeBurca

Drachnien wrote: »

cool offer €120 plus postage then

Deal send me a PM

MonkeyGuy

Has this deal gone through? Will offer 120 + post if not.

Drachnien

I had to pull out

DeBurca

MonkeyGuy wrote: »

Has this deal gone through? Will offer 120 + post if not.

Yes it is still available, I do not do PayPal but cash or Postal Order works for me

MonkeyGuy

Just saw the post about the silencer. How much would you want for both the PDW barrel and the silencer?

DeBurca

MonkeyGuy wrote: »

Just saw the post about the silencer. How much would you want for both the PDW barrel and the silencer?

Is it just the Silencer you want or do you also want the LaRue rail covers and offset flashlight mount + fladhlight. ????????????????

MonkeyGuy

I'd definitely want the rail covers and possibly the torch so a cost breakdown for both would be awesome if you're willing!

DeBurca

MonkeyGuy wrote: »

I'd definitely want the rail covers and possibly the torch so a cost breakdown for both would be awesome if you're willing!

I will do the UAR as shown in post 1 + Silencer + LaRue rail covers + Offset mount and torch for an additional €25, making €145 total + P&P

PS have you read post #21 regarding the mags ???????????????

MonkeyGuy

So with both the barrel and the silencer + the rail covers but without the flashlight?

Just saw it there, how bad a problem is it? Does the spring just need some silly spray or is it something more significant? Also is it definitely a problem with those particular mags or is it the chamber of the gun?

Apologies in advance, I'm in detective mode today apparently.

DeBurca

MonkeyGuy wrote: »

So with both the barrel and the silencer + the rail covers but without the flashlight?

Just saw it there, how bad a problem is it? Does the spring just need some silly spray or is it something more significant? Also is it definitely a problem with those particular mags or is it the chamber of the gun?

Apologies in advance, I'm in detective mode today apparently.

It would appear to be the mags that are the problem as I have several other mags here that work 100%

DeBurca

Due to the Mid-cap mags not feeding reliably I am removing them from the package and am including 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags
As before you can chose in which configuration you like best, all other specs as before

DeBurca

For Sale Tan Urban Assault Rifle €120

Its features ambidextrous fire selectors it also has ambidextrous mag releases above the trigger + a 3rd mag release just forward of the mag like the AUG
The bolt release can also be moved to both sides and locks in the rear position to make hop-up adjustments easier and is released by a button on the top of the body above the butt pad
Comes with 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags

The V3 gearbox has a Quick change spring facility
The gearbox has been shimmed, re-greased and has an Aluminium air-nozzle and is fitted with a Bearing spring guide
It is wired to a Deans connector and is wired with Low-resistance silver wiring a Deans to Tamiya adapter can be supplied if required
I am also including a 7.4 volt Lipo with the UAR

The barrel has be replaced with a 500mm long 6.03 tight bore barrel and has a G&G green hop-up rubber fitted
The longer barrel is covered by a PDW type outer barrel and has a Scar flashider
A Vertical Fore Grip is also included

Shooting 319-322fps with 0.2g BB




Can also come with a silencer (has Navy Seals trades) to cover the 500mm long 6.03 Tight Bore barrel + an Off-Set flashlight mount
Also has a set of individual LaRue rail cover/protectors that can be configured to any length





I am including 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags
As before you can chose in which configuration you like best, all other specs as before

DeBurca

DeBurca wrote: »

For Sale Tan Urban Assault Rifle €120

Its features ambidextrous fire selectors it also has ambidextrous mag releases above the trigger + a 3rd mag release just forward of the mag like the AUG
The bolt release can also be moved to both sides and locks in the rear position to make hop-up adjustments easier and is released by a button on the top of the body above the butt pad
Comes with 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags

The V3 gearbox has a Quick change spring facility
The gearbox has been shimmed, re-greased and has an Aluminium air-nozzle and is fitted with a Bearing spring guide
It is wired to a Deans connector and is wired with Low-resistance silver wiring a Deans to Tamiya adapter can be supplied if required
I am also including a 7.4 volt Lipo with the UAR

The barrel has be replaced with a 500mm long 6.03 tight bore barrel and has a G&G green hop-up rubber fitted
The longer barrel is covered by a PDW type outer barrel and has a Scar flashider
A Vertical Fore Grip is also included

Shooting 319-322fps with 0.2g BB




Can also come with a silencer (has Navy Seals trades) to cover the 500mm long 6.03 Tight Bore barrel + an Off-Set flashlight mount
Also has a set of individual LaRue rail cover/protectors that can be configured to any length





I am including 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags
As before you can chose in which configuration you like best, all other specs as before

Bump @ €120

DeBurca

Bump at €120 in either configuration

DeBurca

Bump

DeBurca

Bump

DeBurca

DeBurca wrote: »

For Sale Tan Urban Assault Rifle €120

Its features ambidextrous fire selectors it also has ambidextrous mag releases above the trigger + a 3rd mag release just forward of the mag like the AUG
The bolt release can also be moved to both sides and locks in the rear position to make hop-up adjustments easier and is released by a button on the top of the body above the butt pad
Comes with 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags

The V3 gearbox has a Quick change spring facility
The gearbox has been shimmed, re-greased and has an Aluminium air-nozzle and is fitted with a Bearing spring guide
It is wired to a Deans connector and is wired with Low-resistance silver wiring a Deans to Tamiya adapter can be supplied if required
I am also including a 7.4 volt Lipo with the UAR

The barrel has be replaced with a 500mm long 6.03 tight bore barrel and has a G&G green hop-up rubber fitted
The longer barrel is covered by a PDW type outer barrel and has a Scar flashider
A Vertical Fore Grip is also included

Shooting 319-322fps with 0.2g BB




Can also come with a silencer (has Navy Seals trades) to cover the 500mm long 6.03 Tight Bore barrel + an Off-Set flashlight mount
Also has a set of individual LaRue rail cover/protectors that can be configured to any length





I am including 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags
As before you can chose in which configuration you like best, all other specs as before

Bump at €120

DeBurca

Bump at €120

cfuserkildare

Trade for a Classic Army M15A4 Carbine SPR RIS?

DeBurca

cfuserkildare wrote: »

Trade for a Classic Army M15A4 Carbine SPR RIS?

Many thanks for the offer but I already have several M4 type AEGs and I am looking to reduce my collection

DeBurca

DeBurca wrote: »

For Sale Tan Urban Assault Rifle €120

Its features ambidextrous fire selectors it also has ambidextrous mag releases above the trigger + a 3rd mag release just forward of the mag like the AUG
The bolt release can also be moved to both sides and locks in the rear position to make hop-up adjustments easier and is released by a button on the top of the body above the butt pad
Comes with 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags

The V3 gearbox has a Quick change spring facility
The gearbox has been shimmed, re-greased and has an Aluminium air-nozzle and is fitted with a Bearing spring guide
It is wired to a Deans connector and is wired with Low-resistance silver wiring a Deans to Tamiya adapter can be supplied if required
I am also including a 7.4 volt Lipo with the UAR

The barrel has be replaced with a 500mm long 6.03 tight bore barrel and has a G&G green hop-up rubber fitted
The longer barrel is covered by a PDW type outer barrel and has a Scar flashider
A Vertical Fore Grip is also included

Shooting 319-322fps with 0.2g BB




Can also come with a silencer (has Navy Seals trades) to cover the 500mm long 6.03 Tight Bore barrel + an Off-Set flashlight mount
Also has a set of individual LaRue rail cover/protectors that can be configured to any length





I am including 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags
As before you can chose in which configuration you like best, all other specs as before

Bump

DeBurca

Bump

DeBurca

Bump @ €120

DeBurca

DeBurca wrote: »

For Sale Tan Urban Assault Rifle €120

Its features ambidextrous fire selectors it also has ambidextrous mag releases above the trigger + a 3rd mag release just forward of the mag like the AUG
The bolt release can also be moved to both sides and locks in the rear position to make hop-up adjustments easier and is released by a button on the top of the body above the butt pad
Comes with 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags

The V3 gearbox has a Quick change spring facility
The gearbox has been shimmed, re-greased and has an Aluminium air-nozzle and is fitted with a Bearing spring guide
It is wired to a Deans connector and is wired with Low-resistance silver wiring a Deans to Tamiya adapter can be supplied if required
I am also including a 7.4 volt Lipo with the UAR

The barrel has be replaced with a 500mm long 6.03 tight bore barrel and has a G&G green hop-up rubber fitted
The longer barrel is covered by a PDW type outer barrel and has a Scar flashider
A Vertical Fore Grip is also included

Shooting 319-322fps with 0.2g BB




Can also come with a silencer (has Navy Seals trades) to cover the 500mm long 6.03 Tight Bore barrel + an Off-Set flashlight mount
Also has a set of individual LaRue rail cover/protectors that can be configured to any length





I am including 2 Low profile 160rnd mags (see photo) it can also takes standard M4 mags
As before you can chose in which configuration you like best, all other specs as before

Weekend bump

cfuserkildare

Trade for an APS ASR 110?
Good condition. Blowback is disabled.
310 fps.