Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Menvier mf400 -> HKC

  • 21-07-2015 10:22AM
    #1
    meh444
    Registered Users, Registered Users 2 Posts: 4 ✭


    Hi there,

    How do I connect a menvier mf400 fire alarm to a hkc 1070?

    My understanding is that I would need a relay- could anyone recommend one?

    The hope is that I would get notifications to my phone should the fire alarm go off.

    Thanks.


Comments

  • #2
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Ideally a 24 volt DC relay would be the best way to go. And wire normally closed from that into a zone programmed as fire on the alarm panel.
    Most good electrical wholesalers would have these. Where are you located?


  • #3
    meh444
    Registered Users, Registered Users 2 Posts: 4 ✭meh444


    I'm in Cork City.

    Which connections do I use on the Menvier panel to wire to the relay?


  • #4
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,790 Mod ✭✭✭✭KoolKid


    Northwood Technology have a lad based in Cork who might be able to look after you.
    You can connect the relay to remote signal or any bell output.


  • #5
    Jnealon
    Registered Users, Registered Users 2 Posts: 2,096 ✭✭✭Jnealon


    I don't do fire but I have seen lads come off a smoke heads which I wouldn't agree with.
    If I am connecting an access system or alarm panel I usually get whoever maintains the system to provide a volt free contact/pair.


Advertisement