self filler on a jarmet

amacca

Anyone here familiar with jarmet sprayers?

Cant for the life of me figure out where to connect up the self fill attachment with it.

if I connect it up one place the pump has no connection to it (unless pump vacuums tank and sucks water up from below - unlikely I think)

if I connect the other place it will go....then the pipe from the bottom of the tank will be left unconnected and it will empty as quick as it fills

it won't connect where the yellow twist seal is as its jammed right up under the tank


Real head scratcher (for me anyway!!!!)

Limestone Cowboy

I never managed to get the one on mine working either! You get what you pay for I suppose!

amacca

Having said that, I'm happy with it so far for all I have to do.....figuring out how to connect the self fill excepted.

omu

Hi all,

I just recently bought a 400lt jarmet but have never used a sprayer before. Any top tips...also the hand lance - where do i connect this to?? Any help appreciated...

Thanks

blue5000

Seen one rigged up with a honda engine, so I guess self filling is a non-runner on them.

50HX

omu wrote: »

Hi all,

I just recently bought a 400lt jarmet but have never used a sprayer before. Any top tips...also the hand lance - where do i connect this to?? Any help appreciated...

Thanks

rinse anti freeze through it before storing for winter
store elevated from the ground - eg on a pallet
wash inside and outside well after each use

spend some time before spraying working out what nozzle size suits you best and keep a a few spare nozzles to hand at all times

never trying freeing a blocked nozzle with a needle - if it won't free with water or air replace it

set sprayer so that the nozzles are 0.5mtrs from the top of what you want to spray - with the pto shaft fairly straight as well - there will be an adjustment at the back

at the section control on the front where you can turn off each section there should be a blank fitted on one of them

you prob have 4 sections on your sprayer