Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

I need an odd sized 58cm ceramic hob !

  • 17-02-2015 06:15PM
    #1
    costellon
    Registered Users, Registered Users 2 Posts: 14 ✭


    My flush (ish) fit (with surrounding frame), 4 ring ceramic hob has needed to be replaced for quite a while as it has a hairline crack on the glass - but two days ago one of the rings gave up the ghost and it's time for a replacement.
    I removed the hob in order to measure the aperture (fitting hole/ recess) and found that it is 54.5cm wide x 47.9cm deep x 4cm high - cut into a GRANITE worktop.
    I checked almost all of the makes and models of hobs (online and by telephone) and they are all built to fit into a 56cm x 49cm aperture .... does anyone know of a unit that will fit into my existing aperture and save me from having to cut my granite counter top ?

    The original hob was a Creda 42252 - no longer manufactured and replacement glass and a ring/ switch would cost more than a new modern unit.

    Any advice will be greatly appreciated, thanks.


Comments

  • #2
    galwaytt
    Registered Users, Registered Users 2 Posts: 12,754 ✭✭✭✭galwaytt


    ...I don't have an answer, but I do have the same problem: a 66cm hob.............again, cut into quartz worktop and now no longer common.

    I got a price for replacement glass today - £ 660 = € 904 !!!

    Ode To The Motorist

    “And my existence, while grotesque and incomprehensible to you, generates funds to the exchequer. You don't want to acknowledge that as truth because, deep down in places you don't talk about at the Green Party, you want me on that road, you need me on that road. We use words like freedom, enjoyment, sport and community. We use these words as the backbone of a life spent instilling those values in our families and loved ones. You use them as a punch line. I have neither the time nor the inclination to explain myself to a man who rises and sleeps under the tax revenue and the very freedom to spend it that I provide, and then questions the manner in which I provide it. I would rather you just said "thank you" and went on your way. Otherwise I suggest you pick up a bus pass and get the ********* ********* off the road” 



  • #3
    costellon
    Registered Users, Registered Users 2 Posts: 14 ✭costellon


    Due to the lack of information out there about this subject and due to the indifferent attitude of ALL hob manufacturers, I took it upon myself to go to every single appliance shop in Galway that has a "hob" display section and lifted and measured every single one ... and found them all to be in or around the industry standard 56cm x 49 cm !
    A few days later whilst in Terryland, I spotted the N17 electrical shop (which I thought had closed down) and I went inside and started measuring.
    The very last hob that I measured had one small spacer bracket riveted to each side of the underside casing (bracket shape _i--i_ - four in all - shaped like a simple square hat) - so I measured the casing without the flimsy brackets, knowing that they could be easily removed ... 53cm wide x 46cm deep x 4.5cm high - excellent !
    I got the hob for €190 - took it home, wired it up, turned it on and did a heat test to see how hot the sides of the casing got and am satisfied that it's perfectly safe with a small gap between it and the quartz/ marble - the proprietor of the shop agreed as I rang him for a second opinion.
    I then got my drill out and drilled the heads off the rivets of two of the spacer brackets in order to remove them, and once I had that done I had plenty of room to fit the unit and decide to leave the other two brackets in situ.

    So, the hob is a "Montpellier" Model: MON-CT4. Place of purchase: N17 Electrical store, Terryland, Headford road, Galway. Price: €199 - but I haggled him down to €190.
    It's a good unit with a touch interface, timer, child lock, four rings, 8 heat settings, 1 year warranty and it's easy to use and clean. The top of the hob (work surface) is 58cm wide x 51cm deep and is only a few mm above the worktop.

    If I have not made myself clear about anything or you do need me to explain anything further don't hesitate to PM me.

    Happy hobbing !


Advertisement