like an M6 bolt but not

rothai

I'm trying to put my babies cot back together, its missing 4 bolts. They are the same thickness as M6 bolts but the thread seems to be wider? any ideas what they might be? they are 65mm long with a round head that take allen key

Alun

A bit like some of the bolts on this page?

http://www.missingscrew.co.uk/epages/es143616.sf/en_GB/?ObjectPath=/Shops/es143616/Categories/Joining_Furniture

Maybe this one?

http://www.missingscrew.co.uk/epages/es143616.sf/en_GB/?ObjectPath=/Shops/es143616/Products/10324

EDIT: Oops, saw this is 50mm, not 65mm.

slimjimmc

Does the bolt screw into a metal cross dowel or directly into the wood (the latter would have a coarse thread akin to a wood screw)

Take a look and see if you can find them here:
http://www.screwfix.com/c/screws-nails-fixings/furniture-fixings/cat840134#category=cat840134&page_size=20&page_start=0
or
http://www.hafele.ie/hircat/templates/hafele/browse.asp?newrecordset=yes&classlevel=9025

rothai

thanks for replys.
its kinda like this one only brass and definatly not M6 but its as wide as a M6
http://www.screwfix.com/p/cross-dowel-bolt-m6-x-50mm-pack-of-50/78664

and its 65mm long

Gen.Zhukov

If it's a coarser thread than M6, I'd say it's 1/4" x 2 1/2" unc (imperial thread-unified coarse)

If there are 20 tips of the thread in a inch, then deffo above.

rothai

1.618 wrote: »

If it's a coarser thread than M6, I'd say it's 1/4" x 2 1/2" unc (imperial thread-unified coarse)

If there are 20 tips of the thread in a inch, then deffo above.

Class, that's what it is so, now anyone know where I could pick 4 up in Dublin at least 65mm long?

North West

Hi Rothal
I see you found bolt type you need. If however you cannot find them a 65mm gutter bolt will do the job only it has to be screwed in.
NW

rothai

North West wrote: »

Hi Rothal
I see you found bolt type you need. If however you cannot find them a 65mm gutter bolt will do the job only it has to be screwed in.
NW

Sorry to be so clueless but where would I get a gutter bolt?

rothai

rothai wrote: »

Sorry to be so clueless but where would I get a gutter bolt?

I've only seen M6 gutter bolts around

Gen.Zhukov

If you can swap out the nut/female thread, do that and get your M6x65. Much easier.
If not ring around places like Freeney/Tuck, AEF, Dublin Bolt and nut (Engrs/fastener suppliers) etc and ask for the size mentioned.

Prob won't have the wide allen skt head but may have hex head or standard socket head cap screw (black or zinc plated)

This place should have them http://www.centuryfasteners.ie/

Don't waste time in hardware shops, big or small.