Plastic Wrap to Protect New Windows

BarneyMc

I'm getting new windows installed next week and was told there's a plastic wrap desingned specifically to attach and protect them.

This can be cut to size and stuck on both inside and outside to protect the windows during the build.

If anyone knows the name of it or suggest where I can buy can you please PM me? Thanks.

db

When I got my windows installed this protective film was already in place at no extra cost. You should ask your supplier to have it done before they deliver.

fclauson

db wrote: »

When I got my windows installed this protective film was already in place at no extra cost. You should ask your supplier to have it done before they deliver.

Agree - how will they protect them in transit without this !!!

BarneyMc

I rang the supplier and they said the windows don't come with any plastic covering - I'm sure they have some sort of protection in transit though.

The supplier said they have a blue coloured protective plastic but it darkens the rooms too much. They suggested using clear 'hardwood covering'. A merchant in Enniskillen supply it so will look into.

whomitconcerns

clear hardwood covering? Erm....maybe its just me but when I saw that I started thinking of skirting board ladders and sky hooks....

rovoagho

Window tinting firms do clear films for safety and security. Might be a bit expensive for your needs though.

BarneyMc

This stuff is what I'm looking for but not sure it can be got in Ireland?

Alternatively there's this stuff.

Will price around and see what's best.

fclauson

I think you are being a little too precious - our ali clad had a plastic wrap on it outside and inside we have painted timber which we touched up where there was a knock as part of the painting phase of the project

one pane did get scratched and the builder said he would replace but we never went through with this because the frames where completed in the factory and you would never get such a good finish on site.

you don't notice it after a little while any way

BarneyMc

fclauson wrote: »

I think you are being a little too precious - our ali clad had a plastic wrap on it outside and inside we have painted timber which we touched up where there was a knock as part of the painting phase of the project

one pane did get scratched and the builder said he would replace but we never went through with this because the frames where completed in the factory and you would never get such a good finish on site.

you don't notice it after a little while any way

Perhaps but I checked with the window supplier and there's absolutely no wrapping whatsoever. Anyway I'll see how much it will cost and take it from there. If nothing else it might save a lot of cleaning

Curious Geroge

I picked up a cling wrap in the local paint store. €30 does about 90sqm so 2 rolls for the avg house. Usually used for painting but should protect the windows throughout the process.

amandasphi

You should try shoji window screen as it provides you Asian look and keep the home at peace, while protecting your window.

sydthebeat

whomitconcerns wrote: »

clear hardwood covering? Erm....maybe its just me but when I saw that I started thinking of skirting board ladders and sky hooks....

Never diss sky hooks, the most used tool by architecture students

DOCARCH

sydthebeat wrote: »

Never diss sky hooks, the most used tool by architecture students

Those...and glass hammers.

liveandnetural

Snip

Roryhy

Snip

BarneyMc

My friend suggested taping polythene wrap so will try that.

moy83

BarneyMc wrote: »

My friend suggested polythene wrap so will try that.

I wouldnt be too worried about covering the windows . When its all finished you will have to spend time peeling off the plastic and giving them a good sparkle anyhow . I would prefer to spend the time or money getting the windows cleaned properly when the build is over .

db

I found that the plastic cover protected the windows from plaster splashes that otherwise would have had to be scraped off. The plastic peeled off very easily as I was removing the tape covering on the frames and the windows just needed a quick wipe to clean them. Saved quite a bit of work with 24 windows including two large bay windows and 2 patio doors.

moy83

db wrote: »

I found that the plastic cover protected the windows from plaster splashes that otherwise would have had to be scraped off. The plastic peeled off very easily as I was removing the tape covering on the frames and the windows just needed a quick wipe to clean them. Saved quite a bit of work with 24 windows including two large bay windows and 2 patio doors.

Its not too bad if the plastic comes off easily, but I've come across plastic that can be leave the glue on the glass and its a nightmare to get that off .
I'm a plasterer myself and hate the plastic being left on the frames for working into . I prefer to be able to plaster right onto the frame and not to have someone cutting into it after with a blade to take off the plaster .
There should be no plaster splashes left on glass or anywhere that need scraping off afterwards . Plenty of clean water when they are working around the windows should leave everything good and clean

fifib

after viewing 3 different houses in the last 2 weeks to look at windows that were just recently installed I certainly will be covering mine to protect them from plaster etc.. all 3 had windows that were damaged with marks and dents. these are timbers windows im talking about so guess pvc wouldnt be as easily marked

moy83

fifib wrote: »

after viewing 3 different houses in the last 2 weeks to look at windows that were just recently installed I certainly will be covering mine to protect them from plaster etc.. all 3 had windows that were damaged with marks and dents. these are timbers windows im talking about so guess pvc wouldnt be as easily marked

The timber ones can stain on the frames alright . Is it galway you are looking at windows ? Who are doing good timber windows around ?

BarneyMc

fifib wrote: »

after viewing 3 different houses in the last 2 weeks to look at windows that were just recently installed I certainly will be covering mine to protect them from plaster etc.. all 3 had windows that were damaged with marks and dents. these are timbers windows im talking about so guess pvc wouldnt be as easily marked

Would you suggest protecting the outside only or inside also?

ht9zni1gs28crp

Did anyone come up with a decent material to protect the frames?

tedimc

I'm planning on investing in some stuff like this. Maybe not this brand, but have been told by someone that used it previously that it was very good.

Will use inside and outside on windows. Was also thinking of spraying on polished concrete floor when its been ground down.

http://protec.designwithsense.co.uk/products/peelgard-glass-protection-spray/

https://www.youtube.com/watch?v=tj6sDwDr_iM

Its seems pretty pricey, but looks like it will be worth it.

braftery

Why accept the plasterer allowing plaster to splash all over the place and not clean up after themselves ?

Perhaps it might be a more cost effective solution to simply inform the follow on trades that any plaster or dirt left on the window frames, or any damage to the frame caused by them will have to be paid for by them.

galwaytt

braftery wrote: »

Why accept the plasterer allowing plaster to splash all over the place and not clean up after themselves ?

Perhaps it might be a more cost effective solution to simply inform the follow on trades that any plaster or dirt left on the window frames, or any damage to the frame caused by them will have to be paid for by them.

..was a client meeting where this very subject came up, this a.m.

window company advising against plastic as, if left too long, can be very difficult to remove.

As for your comment about plasterers cleaning: even where they do, it's with a sponge or brush.......dipped in water...........in a bucket that held plaster.......so in other words, dirty water.

You can inform them all you want, and they should take care, but that won't stop things happening - such is life.

braftery

galwaytt wrote: »

As for your comment about plasterers cleaning: even where they do, it's with a sponge or brush.......dipped in water...........in a bucket that held plaster.......so in other words, dirty water.

Nothing that a second clean bucket, a second sponge, a tap and a willingness to clean up after themselves cant solve.

hexosan

braftery wrote: »

Why accept the plasterer allowing plaster to splash all over the place and not clean up after themselves ?

Perhaps it might be a more cost effective solution to simply inform the follow on trades that any plaster or dirt left on the window frames, or any damage to the frame caused by them will have to be paid for by them.

Mine wash down the windows and cills each evening. They then sweep/rake up the mortar that drops on the ground. Can't fault them in any way.

Their of the opinion that if you get a name for been messy you won't get work.

My stone masons on the other hand seem to put on the last mix in the evening just so it can be thrown all over the place. Needless to say even though their work is good they won't be getting a recommendation from me for future work in the area.

rampantbunny

braftery wrote: »

... and a willingness to clean up after themselves cant solve.

I put plastic on my windows before plastering. Plasterer told me straight-up that he prefers to see it used, as he doesn't have to be as tidy. But the plastic will peel in places from the likes of alu frames if you have them, and it's a given that plaster will lodge there. A spray of water would get rid of it, but again, the tradesman has to be willing.

braftery

rampantbunny wrote: »

I put plastic on my windows before plastering. Plasterer told me straight-up that he prefers to see it used, as he doesn't have to be as tidy.

Additional expense for the client, so the tradesman can be sloppy. Isnt there something wrong with this scenario ?

hexosan

My windows came wrapped and I'm surprised to hear it's not standard practice among all window suppliers

893bet

hexosan wrote: »

My windows came wrapped and I'm surprised to hear it's not standard practice among all window suppliers

Did the glass come covered also?

I thing the frames being wrapped is standard but not the glass?

hexosan

893bet wrote: »

Did the glass come covered also?

I thing the frames being wrapped is standard but not the glass?

Both frames and the glass

The glass was actually double coated inside and out in plastic film.

I used company G and a family member used company M both were covered