Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Help with SPA9000 Please

  • 21-12-2013 11:54PM
    #1
    Big Lar
    Registered Users, Registered Users 2 Posts: 1,444 ✭✭✭


    Hi folks,
    I see there are a few SPA9000 users here on the forum and I could do with a bit of help please.
    I have setup the SPA9000 using the wizard and then configuring a bit on the web UI as the wizard only wants to add one Voip provider, basically at this stage I have 3 incoming lines from Goldfish and 1 outgoing line with Voipgain, internally i have two analogue phones and one SPA 942.
    I have all the incoming calls going to where they should be but my outgoing calls are being a bit troublesome, I want all my outgoing calls to go through Voipgain (Line4) which I believe that I am able to do by changing the call routing rule under PBX parameters in the SIP tab to. (<:L4>9xx.)

    21_12_2013_22_48_51.jpg

    But does anyone know how I can get rid of the dial "9" for an outside line ? So as I can just dial out starting with a "0" ?

    Any help would be appreciated


Comments

  • #2
    Mr. G
    Moderators, Technology & Internet Moderators Posts: 4,622 Mod ✭✭✭✭Mr. G


    Try replacing the 9 with a 0. So all calls starting with 0 go through the provider on L4.
    (<:L4>9xx.)


  • #3
    Mr. G
    Moderators, Technology & Internet Moderators Posts: 4,622 Mod ✭✭✭✭Mr. G


    This might be of use for the dial plan.


  • #4
    Big Lar
    Registered Users, Registered Users 2 Posts: 1,444 ✭✭✭Big Lar


    Mr. G wrote: »
    Try replacing the 9 with a 0. So all calls starting with 0 go through the provider on L4.
    (<:L4>9xx.)

    Thank you Mr. G, that is working like a charm.

    I now have all outgoing calls going through L4, I would like the 18xx and emergency calls to go through any of the first three lines so can I edit the code above:
    (<:L4>0xx.|<:L1,2,3>[1-9]xx.)


  • #5
    Mr. G
    Moderators, Technology & Internet Moderators Posts: 4,622 Mod ✭✭✭✭Mr. G


    Big Lar wrote: »
    Thank you Mr. G, that is working like a charm.

    I now have all outgoing calls going through L4, I would like the 18xx and emergency calls to go through any of the first three lines so can I edit the code above:
    (<:L4>0xx.|<:L1,2,3>[1-9]xx.)

    Yeah, that should work. If it doesn't just use one line instead of three. 997 is the free emergency testing number if it still works. Just test it with a 1800 to check your dial plan.


  • #6
    Big Lar
    Registered Users, Registered Users 2 Posts: 1,444 ✭✭✭Big Lar


    Thank you Mr. G


  • Advertisement
  • #7
    Mr. G
    Moderators, Technology & Internet Moderators Posts: 4,622 Mod ✭✭✭✭Mr. G


    Big Lar wrote: »
    Thank you Mr. G

    No problem. Just shout if you need any more help.


  • #8
    Big Lar
    Registered Users, Registered Users 2 Posts: 1,444 ✭✭✭Big Lar


    I currently use goldfish to forward all incoming calls to my mobile but this costs 17c per min, I could use voipgain or other to forward the calls but they don't seem to have the ability to forward the incoming number. Is there nay workaround in this ?


Advertisement