TM L96 AWS

hitman42

Right this is up for sale agian it had been sold to 1 of the lads from the club but i bought it back about 2 weeks ago. Right i was gonna keep it and upgrade it but have lost the interest totally to do this, so its gotta go. It has been skirmished a few times in total and has lovely range.

The package:

TM L96 AWS with scope, sprayed in a woodland type camo
3 TM L96 mags
Thread adaptor by King arms
Harris clone bi-pod
2 OD warrior .338 Molle mag pouch's
TM box for those who like the box

Its shooting at 290-300Fps

Looking for 280 Euro

Can post, do paypal etc...

roadrunner16

any interest in trades ?

hitman42

roadrunner16 wrote: »

any interest in trades ?

Only trade I would be after is a vfc scar h or l or vfc m4 or g&p m4 or ics m4 with possible cash agustment for the right item

roadrunner16

hitman42 wrote: »

Only trade I would be after is a vfc scar h or l or vfc m4 or g&p m4 or ics m4 with possible cash agustment for the right item

No worries , dont have any of the above , glws

hitman42

roadrunner16 wrote: »

No worries , dont have any of the above , glws

W
Ur welcome to offer what u have never know may interest me

max payne

hitman42 wrote: »

W
Ur welcome to offer what u have never know may interest me

200 cash offered tonight

roadrunner16

hitman42 wrote: »

W
Ur welcome to offer what u have never know may interest me

have an upgraded m249, have a thread up about it
link to thread here
http://www.boards.ie/vbulletin/showthread.php?t=2056811454

hitman42

max payne wrote: »

200 cash offered tonight

would be looking at a bit more than 200 for the lot

S.E.A.L.s

Where are you based and did you originally get this item new please?

hitman42

SEALs_Ireland wrote: »

Where are you based and did you originally get this item new please?

based in sligo i was the second owner the guy i got it from is from our club, it was a impluse buy for him and it never got used by him, it was next to new when i got it

roadrunner16

hitman42 wrote: »

based in sligo i was the second owner the guy i got it from is from our club, it was a impluse buy for him and it never got used by him, it was next to new when i got it

any interest in the 249 ?

hitman42

roadrunner16 wrote: »

any interest in the 249 ?

let me think about it, support guns are a new area to me in airsoft terms

S.E.A.L.s

hitman42 wrote: »

based in sligo i was the second owner the guy i got it from is from our club, it was a impluse buy for him and it never got used by him, it was next to new when i got it

That is a shame, wish you were in/near Dublin or the South East, as I'm not really in to these types of rifles and because of the paint job, I was planning to make an exception

Wishing you all the best and GLWS

hitman42

SEALs_Ireland wrote: »

That is a shame, wish you were in/near Dublin or the South East, as I'm not really in to these types of rifles and because of the paint job, I was planning to make an exception

Wishing you all the best and GLWS

No worries man, thanks for the interest

roadrunner16

hitman42 wrote: »

let me think about it, support guns are a new area to me in airsoft terms

No worries no rush, let me know if you want to give supports guns a go ! I'd love to try sniping :P !

hitman42

roadrunner16 wrote: »

No worries no rush, let me know if you want to give supports guns a go ! I'd love to try sniping :P !

after a bit of thinking dont think support gunning would suit me.

Note: would welcome a LR300 as a trade

roadrunner16

hitman42 wrote: »

after a bit of thinking dont think support gunning would suit me.

Note: would welcome a LR300 as a trade

No worries , best of luck with the trade ! If I sell the support gun I'll be back ! :P GLWT

hitman42

roadrunner16 wrote: »

No worries , best of luck with the trade ! If I sell the support gun I'll be back ! :P GLWT

Sound

hitman42

bump

hitman42

In terms off trades i would really be after a spr or sr25 type

hitman42

260 takes to lot or 220 for the rifle,scope,mags

hitman42

Bump

hitman42

bump

Thomas Wadding

trade for a taurus pt92 with 4 mags and black tac vest and OD Chest rig?

hitman42

Thomas Wadding wrote: »

trade for a taurus pt92 with 4 mags and black tac vest and OD Chest rig?

no thanks

Thomas Wadding

what if i added a p226 with 2 mags?

hitman42

Thomas Wadding wrote: »

what if i added a p226 with 2 mags?

not what i am after lad sorry

Thomas Wadding

orite no bother

hitman42

Would trade for a FAL, G3 or m14

Thomas Wadding

sorry lad i dont have any of them

hitman42

Bump

hitman42

bump

thermo

Any interest in a trade for a tan raider with original highcap and 6 mids. Shoots at 295fps w.2g bb's. Chrono'd Sunday gone in redhills.

hitman42

thermo wrote: »

Any interest in a trade for a tan raider with original highcap and 6 mids. Shoots at 295fps w.2g bb's. Chrono'd Sunday gone in redhills.

really not into tan, would look at a m14

Stephen-mx3

Would you be interested in an upgraded KJW M700 upgraded (custom hop nub, tightbore and sealed leaking areas) with 50 your way?

roadrunner16

would you be interested in a gbb m4 ?

hitman42

roadrunner16 wrote: »

would you be interested in a gbb m4 ?

if its not a agm then, ears open

roadrunner16

hitman42 wrote: »

if its not a agm then, ears open

it started like as the agm but not much of that left had its guts replaced ( hammer,bolt npas,bolt, charging handle,trigger, disconnecter, hammerlock,bolt catch , bolt release. along with a new upper receiver and a g&p knights armament rail and a tdi pistol grip.

hitman42

Stephen-mx3 wrote: »

Would you be interested in an upgraded KJW M700 upgraded (custom hop nub, tightbore and sealed leaking areas) with 50 your way?

more info please

roadrunner16

I have a thread up about the m4

hitman42

roadrunner16 wrote: »

I have a thread up about the m4

any better photo's?

roadrunner16

hitman42 wrote: »

any better photo's?

I'll try get some up now

roadrunner16

here you go , the stock is Pts and has almost no wobble. and the rail system is fixed the upper perfectly aligned just right ,and also has no wobble.

http://imageshack.us/g/1/9982283/

hitman42

roadrunner16 wrote: »

here you go , the stock is Pts and has almost no wobble. and the rail system is fixed the upper perfectly aligned just right ,and also has no wobble.

http://imageshack.us/g/1/9982283/

what comes with it, and could you list whats been done to it from stock to now if thats possible please, is the new upper agm or something else?

roadrunner16

hitman42 wrote: »

what comes with it, and could you list whats been done to it from stock to now if thats possible please, is the new upper agm or something else?

the new upper is g&p I believe I got it when I bought the new rail system because I was worried about the threads not fittin g but it takes a standard one.

ok so I got the agm from another user here on boards and soon after that the hammer broke ( no fault of the previous user just bad luck)
So I decided to replace most of the parts in the trigger group because the stock parts were pants!. So I replaced the hammer first aswell as the spacers on the hammer to bearings. and also did the same with the disconnecter and hammer lock. all these parts are now steel. the bolt was swapped out for the g&p vltor one. which is cnc'd from aluminium its cuts the recoil in half but its worth it because gas efficiency is much better. I swapped the hop up rubber for a stock my one and its great. the outted barrel was also swapped out for a g&p outter barrel, means you can only use cw threaded ends but the flashider that came with it is lovely. the bolt catch has also been replaced but its either g&p or wa. the hop unit had also been replaced but I dont know the brand, but the hop unit is full metal aswell. the externals have been tweaked aswell. the gas block is the low profile element ris one. the rear sight is the G&P 600m one ( got on here from another user) I'll include the grip pod seen in the pic. It comes with a leak free 50 round mag aswell as 4 others in various states of disrepair some needs fill valves and others need a good lubing.
Sorry about that wall of text !! but its come a long way form stock agm !

Stephen-mx3

The M700 comes with a tightbore, custom hob nub and all the usual leaking areas have been sealed. It has barrel spacers and is lethally accurate.

hitman42

Stephen-mx3 wrote: »

The M700 comes with a tightbore, custom hob nub and all the usual leaking areas have been sealed. It has barrel spacers and is lethally accurate.

Any idea what paint was used for its camo job? Have you used it much since you got it? Do u have any photo's, and do u have to box and is it coming with glass?

hitman42

roadrunner16 wrote: »

the new upper is g&p I believe I got it when I bought the new rail system because I was worried about the threads not fittin g but it takes a standard one.

ok so I got the agm from another user here on boards and soon after that the hammer broke ( no fault of the previous user just bad luck)
So I decided to replace most of the parts in the trigger group because the stock parts were pants!. So I replaced the hammer first aswell as the spacers on the hammer to bearings. and also did the same with the disconnecter and hammer lock. all these parts are now steel. the bolt was swapped out for the g&p vltor one. which is cnc'd from aluminium its cuts the recoil in half but its worth it because gas efficiency is much better. I swapped the hop up rubber for a stock my one and its great. the outted barrel was also swapped out for a g&p outter barrel, means you can only use cw threaded ends but the flashider that came with it is lovely. the bolt catch has also been replaced but its either g&p or wa. the hop unit had also been replaced but I dont know the brand, but the hop unit is full metal aswell. the externals have been tweaked aswell. the gas block is the low profile element ris one. the rear sight is the G&P 600m one ( got on here from another user) I'll include the grip pod seen in the pic. It comes with a leak free 50 round mag aswell as 4 others in various states of disrepair some needs fill valves and others need a good lubing.
Sorry about that wall of text !! but its come a long way form stock agm !

gonna have a think on this but really after a AEG or gas SMG

roadrunner16

hitman42 wrote: »

gonna have a think on this but really after a AEG or gas SMG

no worries man if you would prefer I can swap out the stock to a vltor mod stock. to match the bolt ? its a little shorter and has a qd sling swivel so you can use it like an smg ? its up to you man

hitman42

roadrunner16 wrote: »

no worries man if you would prefer I can swap out the stock to a vltor mod stock. to match the bolt ? its a little shorter and has a qd sling swivel so you can use it like an smg ? its up to you man

really need something small like a mp9 and thats not as heavy on gas like most m4s are in this climate

roadrunner16

hitman42 wrote: »

really need something small like a mp9 and thats not as heavy on gas like most m4s are in this climate

yeah that fair enough but the gas efficiency on this is amazing because of the g&p aluminium bolt , let me know anyway