Multiple AEG's For Sale

AirsoftLover90

Hi lads,

I have been given permission by a mod to start a new thread as my old one got too over run

Right so here we go (again):

First up we have a JG hk416. It is in perfect working order.
Shooting 290-305 fps.

Reason for selling: I got a vfc one

Comes with 2 hi caps, and large type 8.4v battery.

Its in perfect working order and the body is in good condition aswel.

It has a ABS body and a metal rail system.

Looking for 140.



Second we have a JG g36k. I got this in a trade a couple of months ago. Heavily upgraded gearbox with recently added new gears, tappet plate, cylinder and spring.

485mm Tk twist barrel giving great range and accuarcy with new air nozzel and hop up to bring the fps up to the mark and give great consistency.
Has a m4 magwell converter.
Firing at between 320-322fps.

Rate of fire 19bb's per second New feather light trigger added for extra sharp response.

This aeg has great range and accuracy.
I am looking for 220 with one vn hi cap mag.
NOTE: the g36 does not come with the ris rail as seen in the pics.


Third up we have a JG aug a3. Its never been skirmished and there is a new hop up rubber in it. Completely stock.
I think its between 290-300, i will get a proper reading this week (hopefully tomorrow).

It comes with: 4 mags, grip, 9.6 battery and original box.

Im looking for 180 euro.



Fourth up we have a custom hk416 with full metal body.
The body is VFC. I got it off thermo a couple of months ago. It has a g&p hop up, barrel and rubber. G&G gearbox shell with steel gears.
G&p m120 motor in it aswel. shootin 295-300 fps.
Socom ace stock and connected to deans or taminya your choice
Comes with two hi caps and a aluminium foregrip.
looking for 230.


Last but no least we have a aeg which i will probably regret selling.
It is a Magpul (G&P) M4 tan Moe.
Its the carbine length version.
I traded my tm vsr for it about a month ago.
I haven't skirmished it.
Externally its in good condition with a few scratches on the magwell and top rail etc. Internally the G&P internals have been replaced with: SHS reinforced piston and head. SHS 16:1 high speed gears. G&P m120 high speed motor and guarder hop up rubber. Its hitting about 23bbs per second on a 9.6 when i tested it and was shooting about 275. I am currently getting a new spring in it to sort the low fps issue sorted.
I will get pictures up when it is back in my possession which should be this weekend.
Comes with a tan pmag mid cap.
I am looking for 190 euro.

I also have a 363mm madbull black phyton barrel that i can add to the custom 416 or Moe for a extra tener.

I can post.
I can accept paypal and postal order.
I wont accept bank transfer sorry.
I can meet up and can deliver if within reason.
I am based in Waterford.
As for trades i would like something that can be used for CQB but i dont want a mp5. Something like a KAC pdw.

I will get more detailed pictures in the next few days.
These were a little rushed.

http://imageshack.us/g/594/41503639589394137011236.jpg/?action=edit

Dont hesitate to ask any questions you may have.
Thanks for looking.

Ebr sniper

Are you selling the mp5? If so wat make and how much? Would you sell de ris rail for g36?

AirsoftLover90

I sold the mp5 to my mate and the RIS rail i am keeping sorry.

Thanks for the interest though.

DeBurca

You need to list the muzzle energy/FPS for both the JG 416 and the AUG A3

AirsoftLover90

opps sorry i will edited that now

Gregor_1996

any chance youd sell the madbul barrel separate?

AirsoftLover90

I will have a think about it mate and will get back to you.

DeBurca

Would you be interested in selling the Socom ace stock
I could offer a different stock and cash

AirsoftLover90

I would be interested.
What stock are you thinking for trade?

DeBurca

AirsoftLover90 wrote: »

I would be interested.
What stock are you thinking for trade?

I have a standard LE stock, a Crane Battery stock or a MagPul MOE stock (clone)
All the above stocks are black

AirsoftLover90

Does aby of them come with a buffer tube?

Gregor_1996

AirsoftLover90 wrote: »

I will have a think about it mate and will get back to you.

okay mate thanks , if you would sell , how much you looking for it , i presume its only a tenner with a rifle am i correct?

DeBurca

AirsoftLover90 wrote: »

Does aby of them come with a buffer tube?

Yes I can supply a buffer tube if you want one

I could also offer some parts as a trade if you like
I have a brand new still in the package set of SHS 13:1 High Speed Gears and lots of other parts

AirsoftLover90

That sounds great, i was looking for a set of gears as you must have seen

I will get close up pics of the stock tomorrow if you like?

What the best offer you can do for me?

eddiejn

Hi airsoft , I d definitely be in the market if u have the m4 now sorted

DeBurca

AirsoftLover90 wrote: »

That sounds great, i was looking for a set of gears as you must have seen

I will get close up pics of the stock tomorrow if you like?

What the best offer you can do for me?

How about LE Stock, Buffer Tube, Brand new set SHS 13:1 High Speed Grears

Gregor_1996

i could offer 15?

AirsoftLover90

eddiejn wrote: »

Hi airsoft , I d definitely be in the market if u have the m4 now sorted

I am trying to sort it as we speak, i will let you know when it is done.

DeBurca wrote: »

How about LE Stock, Buffer Tube, Brand new set SHS 13:1 High Speed Grears

I not too sure about the LE stock, could you do the magpul clone or the crane stock. Also where did you buy the gears? Thanks.

Gregor_1996 wrote: »

i could offer 15?

I would rather put it in one of the aegs im selling than sell it for 15. Sorry but thanks for the interest.

eadyzrx1200

Offer €160 for the m4 moe

eadyzrx1200

Offer €160 for the m4 moe

AirsoftLover90

No thanks mate. Thanks for the interest though:)

DeBurca

AirsoftLover90 wrote: »

I not too sure about the LE stock, could you do the magpul clone or the crane stock. Also where did you buy the gears? Thanks.

I got the gears from Mid West Airsoft, is there any other parts I could offer you ????????

ShadowFox

Offer a magpul clone stock buffer tube and €20 for the socom ace stock

AirsoftLover90

Well, hows it going?

My next project is going to be a dboys pdw so anything for a high rof or anything that would be for cqb torch sights etc.

Thanks.

AirsoftLover90

Hey Grapeape.
I will keep that in mind.
Sort of wanted gears for my project but if nothing comes up i will go with you on that offer

roadrunner16

would you be interested in a we g36 c with two mags ?
I also have a set of shs 13:1 gears that I could include

AirsoftLover90

Very sorry mate, im not into gbb rifles.
Great offer though. Just out of interest what did you want to trade it for?

roadrunner16

No worries , I was interested in the magpul moe . they are all lovely pieces of gear , glws !

AirsoftLover90

You never know i might get back to you on that.

Thanks mate

DeBurca

AirsoftLover90 wrote: »

Well, hows it going?

My next project is going to be a dboys pdw so anything for a high rof or anything that would be for cqb torch sights etc.

Thanks.

When you say sights do you mean folding or red dot

AirsoftLover90

ohh sorry like red dots.

DeBurca

AirsoftLover90 wrote: »

ohh sorry like red dots.

How about a 2x42 Red/Green dot scope 5 levels of brightness each colour
Set of see through lens covers included

AirsoftLover90

Not really into that style mate, do you have any other bits and bobs?

DeBurca

AirsoftLover90 wrote: »

Not really into that style mate, do you have any other bits and bobs?

It would be a lot easier if you say what you are after then for me to be typing for a long long time
I have a awful lot of new parts for gearbox overhaul/repair etc

AirsoftLover90

Ok, do you have any V2 wiring sets, hi speed motors, mid caps, silencers or tac lights.

Anything like that.

DeBurca

AirsoftLover90 wrote: »

Ok, do you have any V2 wiring sets, hi speed motors, mid caps, silencers or tac lights.

Anything like that.

Yes I have a V2 switch set front & rear or I have a Silencer





Or I have a 9 LED tac light shown on the front of my P90

AirsoftLover90

Very interested in the rear wiring switch. What brand is it?
Thats some p90

DeBurca

AirsoftLover90 wrote: »

Very interested in the rear wiring switch. What brand is it?
Thats some p90

Its a Drean Army switch

ShadowFox

Ill offer the magpul clone stock and buffer tube magpul flip sights and a silencer like the one above for the ace stock

AirsoftLover90

DeBurca wrote: »

Its a Drean Army switch

Thats great mate, do you have anything else to throw in? (chancing my arm )

grapeape wrote: »

Ill offer the magpul clone stock and buffer tube magpul flip sights and a silencer like the one above for the ace stock

Great offer mate, i will keep that in mind.

DeBurca

AirsoftLover90 wrote: »

Thats great mate, do you have anything else to throw in? (chancing my arm )

.

I will offer LE Stock, Buffer tube, New SHS 13:1 gears and Either A Silencer or New V2 Switch set or a LED Torch Complete with Mount you pick

AirsoftLover90

I will have a think and get back to you ASAP.

Thanks for the offer and i will get back to you.

AirsoftLover90

Hey De Burca,

Turns out i dont need the gears.

So i was thinking of the le stock and buffer tube, led tourch and mount ans wiring switch for the stock.

If thats ok with you?

Do you want detailed pics of the stock?

DeBurca

AirsoftLover90 wrote: »

Hey De Burca,

Turns out i dont need the gears.

So i was thinking of the le stock and buffer tube, led tourch and mount ans wiring switch for the stock.

If thats ok with you?

Do you want detailed pics of the stock?

I would be willing to deal at that

Photos would be nice

AirsoftLover90

Ok i will get them in the morning for you,

just remind me haha

Thanks again.

DeBurca

AirsoftLover90 wrote: »

Ok i will get them in the morning for you,

just remind me haha

Thanks again.

Talk to you tomorrow

AirsoftLover90

Here you go:
026.JPG

027.JPG



Just wondering could you do the crane stock instead of the le?
Also how bright is the torch?

Look forward to hearing from you.

DeBurca

AirsoftLover90 wrote: »

Here you go:
026.JPG

027.JPG



Just wondering could you do the crane stock instead of the le?
Also how bright is the torch?

Look forward to hearing from you.

Just had a look at the photos and you would hardly call the ACE stock in prestine condition
I have no idea what the output of the light is, it is fine for CQB but it would be a little weak for outdoor use

Considering the condition of the ACE stock I will stick with my offer of the LE stock

AirsoftLover90

I completely understand my friend. Thats why i put up pictures for you so you could see the condition and judge it for yourself, i wouldnt have anybody buy without seeing the item first.

So the LE stock and buffer tube, wiring switch.

I think i would need a brighter torch, just wondering is there any other bits and bobs you have lying around, olive drab rail covers, anything to do with the f2000 (long shot), mag pulls, m4 mags or any other red dots (i could add a bit of cash if necessary).
Thanks mate and sorry about me not making my mind up.

DeBurca

I don't have olive drab rail covers but I have a set of 4 in black if they would do

AirsoftLover90

No black wouldn't do sorry.
Very sorry again for not making my mind up.