Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Constraints on autocad 2013

  • 31-07-2012 1:46pm
    #1
    dermocol
    Registered Users Posts: 9 ✭


    Hi lads

    I am just after getting the latest version of Autocad however there is one thing that is driving me crazy. When i am doing a drawing the constraints are interfering with the drawing. I have to tried to turn them off but to no avail. Does anyone know how to disable them?


Comments

  • #2
    __Robinhood__
    Registered Users Posts: 94 ✭✭__Robinhood__


    Have you suppressed them in the browser panel?


  • #3
    dermocol
    Registered Users Posts: 9 ✭dermocol


    Hi Robinhood. Thanks for the response. What i usually do is go into the parametric tab and delete the constraints from the drawing however i am fed up from doing this. If i drag a grip on one elevation it moves something on a different elevation.

    I have suppressed them in the browser menu all the constraints are un-ticked, however the constraints icon remains beside the cross hairs on the drawing sheet and i still have to go back and delete all the constraints. Please Advise!!!!!


  • #4
    __Robinhood__
    Registered Users Posts: 94 ✭✭__Robinhood__


    I know what your saying al right, it messes up the assembly completely sometimes if you delete them.

    What could be the case is that you have the constraints added in the wrong sequence. I found that adding constraints (less as possible) in a different sequence works for me. I know that there's a rule of thumb in which to do this, but I cant think of it now.

    Ill play around with it and let you know!


  • #5
    abricon.holmes
    Registered Users Posts: 1 ✭abricon.holmes


    http://cad2013tricks.blogspot.in/2012/11/disable-auto-constrains-in-autocad-2013.html:
    :cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool:


Advertisement