VFC CUSTOM HK416 orig. markings

area51comando

Hey,

I have a VFC HK416 for sale. Its been customized and guccied .

Has the original markings of HK.

It has a new king arms 8mm gear box.
9.6v firefox nun-chuck battery kept in crane stock.
systema magnum motor for high fire rate.
and an ak pore length barrel 6.01mm for long range.
comes with 2 mags hi-cap 300 round.
also ill throw in an extended barrel attachment.
Selling for €300.

Only serious buyers wanted please. No time wasting. And im NOT looking for trades.

area51comando

bump

area51comando

Price drop to 260 with another high-cap

So 416 + 3 high caps for €260

IrishMactire

area51comando wrote: »

Price drop to 260 with another high-cap

So 416 + 3 high caps for €260

If you decide to open this up to trades please let me know.

Bemused

How well does she fire and what is the energy? Are there any issues with the gun? What's the reason for sale?

area51comando

Well its got a systema magnum motor in it so its dishes out alot of bb's in a short time so rate of fire is excellent.

Got it chronoed and it was at around 324-326fps.

Only think i've noticed is that sometimes it can fire on safe dont ask me how could be due to when I had one of the shops replace the gear box with a 8mm king arms one.

reason is that im just interested in getting a different one now have had an m4 then this 416 so am now thinking of getting an ak or something like that.

AirsoftLover90

if you do decide to open to trades i have a few aegs on my thread
thanks

AirsoftLover90

i offer 200 collected

area51comando

Lowest I'll do is €240 mate and I'll still give ya the 3 high caps. It is a VFC

AirsoftLover90

can you meet closer to waterford?

AirsoftLover90

if you dont mind mate, could i see a few pics of the other side?

also how much use has it seen?
where did you get it from?
whats the rate of fire?
is the bolt release broken?
does the charging handle lock into place when you pull it?
do you have the original vfc gearbox?
also why is the rear locking pin half way out?
thanks

area51comando

The closest I could get to would probably be bray, co.wicklow


When you pull charging handle works just fine as you would expect and the bolt release comes back where you can get to your hop-up.

It does get used much as I barely get time to airsoft due to work.

Original vfc gearbox broke ages ago when I still had just gotten it so that's gone.

As I said the rate of fire is amazing and you'll always get asked as I have that's due to the systema magnum motor inside it.

Locking pin was a bit out cause I wanted to get Inside and clear barrell :P

AirsoftLover90

could i see some more pictures if you dont mind? of the other side zoomed in and also the same side zoomed in, thanks again

bquek12

Still selling ur VFC 416?

area51comando

bquek12 wrote: »

Still selling ur VFC 416?

I am mate

area51comando

AirsoftLover90 wrote: »

could i see some more pictures if you dont mind? of the other side zoomed in and also the same side zoomed in, thanks again

extra pics!

AirsoftLover90

hi mate, i will offer the 240,
is there a battery?
thanks

area51comando

AirsoftLover90 wrote: »

hi mate, i will offer the 240,
is there a battery?
thanks

Yea man asg 9.6v batt. Stored in crane stock.

If her happy go to PM's

AirsoftLover90

offer withdrawn man sorry, only saw the pics now,
sorry and glws

area51comando

AirsoftLover90 wrote: »

offer withdrawn man sorry, only saw the pics now,
sorry and glws

No worries cheers for interest!

MagicIRL

I'm very, very interested.

Few questions-

1. Where does the battery go? Is in the crane stock? How easy is it to get in? I've literally lost the plot with AEGs in the past due to battery insertion (lol) issues.
   
2. Why are you selling it? Seems you put a lot of work into getting it the way you want and now you're selling?
   
3. Have you ever had any problem with it? I mean it's a VFC, why did you change so much inside it (including the gearbox)?
   
4. Where did you get it originally? Was it from a retailer or second hand?
   
5. Have you ever used mid-caps in it? Any idea what brands feed in it? I've often found with high ROF AEGs that some brands can't keep up with the AEG!
   
6. And finally, does the bolt lock back with the bolt catch or does it just manually cycle forward again when you let go of the charging handle?

Cheers!

area51comando

MagicIRL wrote: »

I'm very, very interested.

My one question- Where does the battery go? Is in the crane stock? How easy is it to get in? I've literally lost the plot with AEGs in the past due to battery insertion (lol) issues.

haha not to worry its stored in the crane stock.

Very easy to install and take out really is. Hate fiddling with batteries myself! :P

MagicIRL

Cheers, I added more questions to my original post if you could give them a quick glance please!

area51comando

MagicIRL wrote: »

I'm very, very interested.

Few questions-

1. Where does the battery go? Is in the crane stock? How easy is it to get in? I've literally lost the plot with AEGs in the past due to battery insertion (lol) issues.
2. Why are you selling it? Seems you put a lot of work into getting it the way you want and now you're selling?
3. Have you ever had any problem with it? I mean it's a VFC, why did you change so much inside it (including the gearbox)?
4. Where did you get it originally? Was it from a retailer or second hand?
5. Have you ever used mid-caps in it? Any idea what brands feed in it? I've often found with high ROF AEGs that some brands can't keep up with the AEG!
6. And finally, does the bolt lock back with the bolt catch or does it just manually cycle forward again when you let go of the charging handle?

Cheers!

Sure well i answered question 1 already

Q2. I have had this aeg for awhile and now ive decided I just want a change. Especially for me I tend to get bored of stuf quickly and well Im looking at going russian gearwise or maybe something else. Ive had an m4, and this 416 so fed up with american guns if ya get me?

Q3. When I bought it originally the gearbox literally broke down within 3 months if i remember correctly. So the original gearbox was literally crap!
So I had it replaced and it works like a charm now. Was a hardcore airsofter but now work and other life-ly problems have just gotten in the way so I just aint that mad into the sport as i used to be so back then I was the type to have best internals and motors and everything else.

Q4. I got it originally from a retailer but I dont think i can post there name here?!? But yea bought from a retailer.

Q5. Ive found that cheap brand mags dont lock in tightly into the magwell. I used dboys mags and sometimes they would fall out of the magwell cause they dont lock in too tight. but there high caps midcaps fit nice and comfey inside. Like anything with the sport better brand stuff functions better than the cheap stuff.

Q6. When you pull the charging handle the bolt latch on the side(where the hop up is) the little door opens. and if you let go of the charging handle it locks back into place but the door remains open.

MagicIRL

Sounds good.

Would you be up for meeting at a site so I can try before I buy? I was thinking Vacant in Naas, Kildare?

I'll offer 200euro for it as I'm travelling to ya.

area51comando

MagicIRL wrote: »

Sounds good.

Would you be up for meeting at a site so I can try before I buy? I was thinking Vacant in Naas, Kildare?

I'll offer 200euro for it as I'm travelling to ya.

200e is lower than what im looking for man.

lowest id do is €240. and vacant is a bit of a treck aswell.

id meet somewhere else though

MagicIRL

area51comando wrote: »

200e is lower than what im looking for man.

lowest id do is €240. and vacant is a bit of a treck aswell.

id meet somewhere else though

I'd be coming from Dublin South, would prefer to meet at a site somewhere though to shoot it and not look like a fleeting IRA member. If you pick a site that suits you I'll get to it.

Would ya take 220e for it?

area51comando

MagicIRL wrote: »

I'd be coming from Dublin South, would prefer to meet at a site somewhere though to shoot it and not look like a fleeting IRA member. If you pick a site that suits you I'll get to it.

Would ya take 220e for it?

Yea i dont mind meeting at a site em would rathbeggan suit? The lowest would have to be 240 mate for the gun and 3 high caps!

MagicIRL

I noticed in the OP picture that the bolt release is missing. Do you have it or is it broken?

area51comando

MagicIRL wrote: »

I noticed in the OP picture that the bolt release is missing. Do you have it or is it broken?

Just missing not broken lost it when I Got the gearbox changed.

MagicIRL

I can assume then that the functional bolt catch and release is no longer functional due to the missing release?

Also what brand of BBs do you use in it considering it's 6.01mm? I've heard Excel 6mm BBs are the only ones you should use?

area51comando

MagicIRL wrote: »

Also what brand of BBs do you use in it considering it's 6.01mm? I've heard Excel 6mm BBs are the only ones you should use?

Mate any bb's do. I use the raptors from Mia. But to me a bb is a bb do I use any of the good bb's. Raptor, g&g , hellfire.

area51comando

Sorry man my bad it's a 6.03mm pore barrell.

area51comando

Bump

area51comando

Still around!

area51comando

price drop aeg + 1 mag for €210

Grand

Do you ship outside of UK?

area51comando

Grand wrote: »

Do you ship outside of UK?

I don't mind but I won't take responsibility if anything happens to it customs wise and wouldnt give a refund if customs seized it.

Grand

Ok. A few questions then;
Is it the original mag or a different one? (If it is does the windtool come with?)
Also the extended barrel attachment is that a suppressor or a longer barrel?
Was the bolt catch and bolt release fully functional?
How much would it be without the battery? Already have 2 nunchucks.

area51comando

I don't want to be answering the same questions so please read through the thread where I have long replies.

Price is same even without battery.

area51comando

bump aeg for €230 everything works fine everything is there only thing is safety doesnt work.

area51comando

bump aeg really is very powerful and has great range only thing is safety doesnt work and im not really a techie so wouldnt dare take it apart.

Arkslippy

Offer 170 for just gun. don't need hicaps or battery or barrel extension kit. you could easily sell them separately.

just don't need them.

area51comando

Arkslippy wrote: »

Offer 170 for just gun. don't need hicaps or battery or barrel extension kit. you could easily sell them separately.

just don't need them.

Very honest and fine of you. I accept.

Proceed to PM's?

Arkslippy

area51comando wrote: »

Very honest and fine of you. I accept.

Proceed to PM's?

cool. send pm.

area51comando

PM sent

Airsoft lady

area51comando wrote: »

PM sent

is this sold???

area51comando

Not yet

wtff0nzie

Is this still available and can you meet in Dublin?

AirsoftLover90

i will offer 150 collected. no mag battery or extension just aeg. thanks

AirsoftLover90

AirsoftLover90 wrote: »

i will offer 150 collected. no mag battery or extension just aeg. thanks

I will go to 170 sure as long as its fully working internally and I can have a test fire. Thanks