Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Today I ordered

17677798182174

Comments

  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    grindle wrote: »
    Be warned, a lot of NR wire needed, bit fiddly/time-sucky...BUT...doesn't leak.
    At. All.
    Which is nice as tank devices go. Works with the Kayfun conversion kit that China will hopefully clone.
    Go China! Make my life affordable!


    Well used to faffing about with nr wire with the killer. Hopefully won't provoke quite so much bad language as that does!

    What's the kayfun conversion? I have a Kayfun already and like it a lot.


  • Registered Users, Registered Users 2 Posts: 6,026 ✭✭✭grindle


    Some guy on a Polish forum started making this kit to convert the wide GG atties to a Kayfun. It therefore works with all of the good GG tank atty clones!
    Nautilus/Terminator-C/Hercules/Magoo
    http://www.e-papierosy-forum.pl/upgrade-nautilusa-t39675.html

    You'll get on fine with the Magoo, it takes a while to set up, but you don't have to fit wires down tiny holes or worry about leaks or dry hits (from my experience) and dual-coils work properly in it! Woo!
    Or, y'know, single coil too...all on it's lonesome. No friends to speak of, just sitting in the middle of the atty on it's own.
    All that juice and nobody to help it in battle.
    :'-(


  • Registered Users, Registered Users 2 Posts: 952 ✭✭✭Themadhouse


    Bit late!
    I ordered and got 2 innokin Ucans. Hoping they work as easy storage for liquid. :-)


  • Closed Accounts Posts: 3,305 ✭✭✭Green Hornet


    One of the things that really annoys me about vaping is that some juice nearly always gets on trouser pockets from the bottles and can be stinky depending on the juice. Those ucans look pretty good from that point of view.


  • Registered Users, Registered Users 2 Posts: 952 ✭✭✭Themadhouse


    One of the things that really annoys me about vaping is that some juice nearly always gets on trouser pockets from the bottles and can be stinky depending on the juice. Those ucans look pretty good from that point of view.

    Yeah, i need something to hold some juice for a few days in hospital. Didnt want to be bringing bottles with me so hopefully these work.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 758 ✭✭✭platinums


    MaryK666 wrote: »
    I got mine from the same place as yours platinums. I got a bottle of Coffee Cream and a bottle of Pchelas Poison.
    The Pchelas Poison is a lovely smooth coffee/chocolatey/caramelly vape with clouds of vapour and it tastes divine.
    The Coffee Cream, on the other hand, has a really rough chemical taste that turns my stomach. I'm going to take wingnut32's advice and steep it for a long time until I'm brave enough to try it again.

    I bought some Mom & Pops Cappasnack from another Irish site and it is a very smooth vape which tastes and smells like it's meant to. :D

    Now Mary a weeks steep later is that juice still stinging your nostrils or has the steep made a difference?


  • Registered Users, Registered Users 2 Posts: 1,213 ✭✭✭was.deevey


    1 Litre of PG
    1 Litre of VG
    10ml of Sucralose
    10ml of Ethyl Maltol
    50 x 10ml Empty bottles

    And a heap of Syringes in various sizes with 20g Needles.

    Boring sorry :p need to try to make my Juice Flavours a little ... tastier.


  • Registered Users, Registered Users 2 Posts: 1,906 ✭✭✭EGriff


    was.deevey wrote: »
    1 Litre of PG
    1 Litre of VG
    10ml of Sucralose
    10ml of Ethyl Maltol
    50 x 10ml Empty bottles

    How much did all that set you back? And from where. It would take me about 2 years to go through the juice that could be made from that.


  • Registered Users, Registered Users 2 Posts: 1,213 ✭✭✭was.deevey


    How much did all that set you back? And from where. It would take me about 2 years to go through the juice that could be made from that.

    About 20 Euro for this lot this side of the world (Philippines)...should be good for around 150 10ml bottles

    Bear in mind that lot doesn't include Nicotine base or Flavoring which is the most expensive part (but I have lots already)


  • Registered Users, Registered Users 2 Posts: 297 ✭✭MaryK666


    platinums wrote: »
    Now Mary a weeks steep later is that juice still stinging your nostrils or has the steep made a difference?

    I haven't been brave enough to try it yet, platinums, and I need to re-wick another head for my T3 as I want to try if with a fresh, clean wick to make sure I get the best from it. It doesn't smell as "chemically" as it did before but it's still there. I might give it another few days until the smell goes away before I dare to try it again.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 159 ✭✭unblvlblkult


    Ordered a Magoo and some rebuilable material from Vaperus yesterday - Arrived today by 11!!

    Awesome service by Vaperus and An Post. Who wuddve though the actual Mullagh was so well connected. Looking forward to giving the Magoo a go. Anyone run these sub-ohm or just even on a mech mod (18350 + no kick)


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    Ordered a Magoo and some rebuilable material from Vaperus yesterday - Arrived today by 11!!

    Awesome service by Vaperus and An Post. Who wuddve though the actual Mullagh was so well connected. Looking forward to giving the Magoo a go. Anyone run these sub-ohm or just even on a mech mod (18350 + no kick)

    I've been playing with the Magoo for a week or two now. A breeze to setup one the wire is sorted. Used it with a kick and just on my Dingo with an 18350. Lowest I've gone is 0.9 ohm single coil which seems to work well. Looking to dual coil when I get a minute to fiddle.


  • Registered Users, Registered Users 2 Posts: 159 ✭✭unblvlblkult


    Ionised wrote: »
    I've been playing with the Magoo for a week or two now. A breeze to setup one the wire is sorted. Used it with a kick and just on my Dingo with an 18350. Lowest I've gone is 0.9 ohm single coil which seems to work well. Looking to dual coil when I get a minute to fiddle.

    good stuff, how do you mean "once the wire is sorted". Is it a litle fidly to set up? any tips?


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    good stuff, how do you mean "once the wire is sorted". Is it a litle fidly to set up? any tips?


    Hardest bit for me is the res/no res wire joins. After that I'm golden :-)

    Less fiddly than the killer but not as easy as the kayfun.

    Great vape when it's sorted though and nice to have adjustable air and juice flow.


  • Registered Users, Registered Users 2 Posts: 1,366 ✭✭✭dePeatrick


    Ionised wrote: »
    Hardest bit for me is the res/no res wire joins. After that I'm golden :-)

    Less fiddly than the killer but not as easy as the kayfun.

    Great vape when it's sorted though and nice to have adjustable air and juice flow.
    Did you try out the packs of pre-made wire yet? Looked like a very good deal at 10c each.......though I did try very hard to get you connected to an electric fence :D


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    dePeatrick wrote: »
    Did you try out the packs of pre-made wire yet? Looked like a very good deal at 10c each.......though I did try very hard to get you connected to an electric fence :D


    I have some on their way to ease my pain. Looking forward to dual coiling this sucker as it is just crying out for it.


  • Registered Users, Registered Users 2 Posts: 1,366 ✭✭✭dePeatrick


    Ionised wrote: »
    I have some on their way to ease my pain. Looking forward to dual coiling this sucker as it is just crying out for it.
    Will be interested to see how you get on, am thinking of getting an Igo next and may go for a dual coil if it is not too difficult to rebuild. Will take a look at the Magoo too :)


  • Registered Users, Registered Users 2 Posts: 913 ✭✭✭heliguyheliguy


    Ionised wrote: »
    I have some on their way to ease my pain. Looking forward to dual coiling this sucker as it is just crying out for it.

    Just a quick heads up on the pre-made res no-res wires, they taste foul, you will need to torch the crap out of them before use.

    It's not big deal really, I try to make up a bunch at the same time so it only takes 30 seconds to torch a bunch of them. :)


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    Just a quick heads up on the pre-made res no-res wires, they taste foul, you will need to torch the crap out of them before use.

    It's not big deal really, I try to make up a bunch at the same time so it only takes 30 seconds to torch a bunch of them. :)


    Got the wires yesterday. Makes setting up the Magoo a breeze. Rocking dual coil at 1.1 ohms. Impressed with the pre-made wires... At that price it's a no brainer.


  • Registered Users, Registered Users 2 Posts: 156 ✭✭spyder238


    Ionised wrote: »
    Got the wires yesterday. Makes setting up the Magoo a breeze. Rocking dual coil at 1.1 ohms. Impressed with the pre-made wires... At that price it's a no brainer.

    Just got the Magoo yesterday and i'm loving it, where did you get the premade wire from?


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    spyder238 wrote: »
    Just got the Magoo yesterday and i'm loving it, where did you get the premade wire from?


    Got them from Vaperus. Have 1.8 ohm and also got 2.2 to dual coil. Around 5euro for 50 wires.


  • Registered Users, Registered Users 2 Posts: 297 ✭✭MaryK666


    platinums wrote: »
    Now Mary a weeks steep later is that juice still stinging your nostrils or has the steep made a difference?

    I hate to have to say this, platinums, but I tried the M&P's coffee cream again tonight and, despite steeping it for over a fortnight, I still hate it.
    Almost as much as I hate Hangsen Irish Cream.

    It smells a lot better than it did originally but it still has a chemically taste that's really bitter and difficult to vape without making me feel queasy.
    So, I guess I can add this to the pile of "mistake" bottles which appears to be growing by the day. :(


  • Registered Users, Registered Users 2 Posts: 745 ✭✭✭csi vegas


    Ionised wrote: »
    Got them from Vaperus. Have 1.8 ohm and also got 2.2 to dual coil. Around 5euro for 50 wires.

    I took a look at it http://www.vaperus.ie/rebuilding-supplies/391-rainbow-killer-coils.html "with no resistance lead"
    but as you say you got 1.8 and 2.2ohm resistances.
    They advertise as having both (obviously) but this is where I'm confused - how can it be "no resistance" if it's available in 1.8 and 2.2, anyone?

    Or am I just confusing myself (again), rathar that a 'no resistance' wire does have ohms but has no 'gauge'/resistance? Have I just answered my own question (again) :o

    Also "This Coil is made from lead wires"...lead as in lead roof material :eek: or lead as in television/toaster lead?


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    csi vegas wrote: »
    I took a look at it http://www.vaperus.ie/rebuilding-supplies/391-rainbow-killer-coils.html "with no resistance lead"
    but as you say you got 1.8 and 2.2ohm resistances.
    They advertise as having both (obviously) but this is where I'm confused - how can it be "no resistance" if it's available in 1.8 and 2.2, anyone?

    Or am I just confusing myself (again), rathar that a 'no resistance' wire does have ohms but has no 'gauge'/resistance? Have I just answered my own question (again) :o

    Also "This Coil is made from lead wires"...lead as in lead roof material :eek: or lead as in television/toaster lead?


    When they say lead, they mean as in a dog lead. Each wire has a small bit of resistance wire with a leader of a no resistance wire attached to each end.

    Some atomisers need this kind of setup... Like the Killer, Sophia, Magoo... And a load of others.
    You can make up the wires yourself but it's a pain unless you have a wire welder.


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    Received today..Igo W

    Setup for stealth vaping with 1.1ohm dual coil.

    10155114035_6a60536025_c.jpg


  • Registered Users, Registered Users 2 Posts: 1,366 ✭✭✭dePeatrick


    Oh that is a gorgeous set-up, love how short it is, what is the Mod?


  • Registered Users, Registered Users 2 Posts: 745 ✭✭✭csi vegas


    @ Ionized, what a lovely little set up. What's that mod tube? Looks pricey.


  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    The mod is a GP Paps Lux 2.5 in 18350 mode -->> http://www.vapourart.com/en/product/gp-paps-18350-lux-edition-version-25

    Including the drip tip it's 9cm tall...just the mod is 6cm.


  • Registered Users, Registered Users 2 Posts: 1,366 ✭✭✭dePeatrick


    Very nice :)


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,568 ✭✭✭Ionised


    Just ordered some Mrs Lord & Co Seville Marmalade.

    Getting it sent to my brother in UK as I'll be able to collect it next week.


Advertisement